Petsafe BDT-300 Owner's manual

Category
Pet care
Type
Owner's manual

Petsafe BDT-300 is a remote trainer that can be used to train your dog. It has a range of up to 400 yards and features 8 levels of correction, so you can customize the training to your dog's individual needs. The BDT-300 also has a built-in tone-only mode, which can be used to reinforce good behavior without delivering any correction.

To use the BDT-300, simply attach the collar to your dog's neck and turn on the transmitter. You can then use the transmitter to send a correction or tone signal to the collar. The BDT-300 is also waterproof and submersible, so you can use it to train your dog in any weather.

Petsafe BDT-300 is a remote trainer that can be used to train your dog. It has a range of up to 400 yards and features 8 levels of correction, so you can customize the training to your dog's individual needs. The BDT-300 also has a built-in tone-only mode, which can be used to reinforce good behavior without delivering any correction.

To use the BDT-300, simply attach the collar to your dog's neck and turn on the transmitter. You can then use the transmitter to send a correction or tone signal to the collar. The BDT-300 is also waterproof and submersible, so you can use it to train your dog in any weather.

RemoteTrainer
OwnersManual
I.Assemblecollar
Components
!
!
!
!
!
Transmitter
Receiverwithcollar
TrainingManual
OwnersManual
Video
II.Installbatteries
remove
screws(2)
9volt
battery
9volt
battery
-
Mode1.
automaticallyafter45minutesofnon-useto
conservebatterypower.
Locatethetwodotsonboththetransmitterand
receiverthenslowlyplacetwodotstogetherfor3
secondsandthenseparate.Listenforoneshortbeep.
Long
Beep
2
connect
connect
BigDogreceiver
LittleDogreceiver
6volt
battery
III.Turningyourremotetraineron&
selectingoperatingmode
remove
screws(2)
remove
screws(2)
observeproper
polarity
Step1: Threadslide
buckleontothecollarfirst.
ImportantNote:Slidebucklealsopreventscollarfrom
becomingloosearoundyourdogsneck.
ImportantNote:Ribsmustbefacingup,otherwisecollarwillslipifitis
notproperlythreaded.
Step2: Threadendofthecollarupthroughthebuckle.
Step3:Threadexcesscollarthroughtheslidebuckleto
holditinplace.Thiswillallowyoutoadjustyourpet’s
collarashegrows.
Mode1. AutomaticShut-off.Receivershutsoff
automaticallyafter45minutesofnon-useto
conservebatterypower.
Mode2. ManualShut-off.Receiverremainson
untilmanuallyturnedoff.
ToturnreceiverofffromeitherMode1
or2,s lowlyplacedotstogetherfor3
secondsandthenseparate.Listenfora
longbeep.
Locatethetwodotsonboththetransmitterand
receiverthenslowlyplacetwodotstogetherfor3
secondsandthenseparate.Listenforoneshortbeep.
Afterplacingthereceiverinmode1,within5
secondsofthefirstbeep,slowlyplacedots
togetheragainforthreesecondsandthen
separate.Listenfortwoshortbeeps.
Long
Beep
3
connect
connect
BigDogreceiver
LittleDogreceiver
6volt
battery
III.Turningyourremotetraineron&
selectingoperatingmode
remove
screws(2)
remove
screws(2)
ImportantNote:Ribsmustbefacingup,otherwisecollarwillslipifitis
Signal
indicator
light
Correction
withnegative
tone.
Negative
toneonly
Program
button
IV.Setthecorrectionlevel
TorogramCorrectionlevel,holddownthebutton.After
2seconds,thereceiverwillindicatethepresentcorrection
levelsettingbybeepingthecorrespondingnumberoftimes
forthecurrentlevel.
Continuetoholdthebuttondownuntilthenumberof
beepsequalsthelevelofcorrectionyouwant.
AfterLevel8,thereceiverwillgobacktoLevel1.
PP
P
V.Placingthecollaronyourpet
]
\
\
\
DOmonitoryourdogduringinitialuse.
DON’Tputcollarontootight.
DON’Tleaveonforextendedperiodsoftime.
DON'Tuseuntilthroughlyreadingthetrainingmanual.
RadioSystemsCorporation,10427ElectricAve.,Knoxville,TN37932
1-800-732-2677www.radiosys.com
4
VI.Begintraining
VII.Maintenance
Pleasereadthetrainingmanualthoroughlyandreviewthevideobefore
beginningtraining.
Checkbatteries(monthly).
Cleanprobeswithalcohol(weekly).
Besurethattheprobesaretightenedsecurelytothereceiver(monthly).
Checkyourpetsneckforanyirritation(daily).
Performeachofthefollowing:
]
]
]
]
400-206/B
Caution:Toreduceriskofelectricshock,DONOTREMOVECOVER.Refertoqualifiedservicepersonnel.Riskoffire.
Riskofelectricshock.InstallTransmitterindoors.DoNotexposetorain.Thisdevicecomplieswithpart15
oftheFCCRules.Operationissubjecttothefollowingtwoconditions:1.Thisdevicemustnotcauseharmfulinterfer ence2.
Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.
14VAC1.8A
FCCID:KE3IF100
1 / 1

Petsafe BDT-300 Owner's manual

Category
Pet care
Type
Owner's manual

Petsafe BDT-300 is a remote trainer that can be used to train your dog. It has a range of up to 400 yards and features 8 levels of correction, so you can customize the training to your dog's individual needs. The BDT-300 also has a built-in tone-only mode, which can be used to reinforce good behavior without delivering any correction.

To use the BDT-300, simply attach the collar to your dog's neck and turn on the transmitter. You can then use the transmitter to send a correction or tone signal to the collar. The BDT-300 is also waterproof and submersible, so you can use it to train your dog in any weather.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document