VM Audio EXS652M Installation guide

Brand: VM Audio

Model: EXS652M

Category: Car speakers

Type: Installation guide

This manual is also suitable for

EXS692M

EXS652M

ELUX MARINE FULL RANGE SPEAKERS

CONSUMER LIMITED WARRANTY AGREEMENT

Your product is covered by a limited warranty by VM Audio as established below:

Mobile Electronics Limited Warranty

Products purchased from an Authorized VM Audio Dealer are warrantied

to be free of defects in material and workmanship for one (1) year from the

date of original purchase under normal usage. Products that are identied as

“refurbished” have a limited warranty of ninety (90) days from the date of original

purchase. Dated proof of purchase (original receipt or invoice) will be required

for all warranty claims. In the unlikely event that you experience a manufacturing

defect or malfunction during the warranty period, VM Audio will repair the

defective product or replace with the same or equivalent product if the same

item is not available or discontinued. Replacement product may have supercial

blemishes or scratches that do not affect the performance of the product. This

warranty is only intended and valid for the original purchaser and cannot be

extended to subsequent owners. Any applicable implied warranties are limited to

the period of the expressed warranty starting from the original purchase date.

No warranties, expressed or implied, will be accepted after the previously listed

periods. Exclusions may apply; please check your local state laws.

Instructions for Claiming Warranty Service

If you should require warranty service, please return the product to the

authorized VM Audio Dealer you originally purchased the item from for

experienced and speedy warranty service. Contact VM Audio directly to nd the

authorized dealers nearest you.

In case the defective merchandise needs to be returned to VM Audio, please

assigned to you. It is important to pack all defective items in the original packaging

to prevent damages from shipping, and be sure to write the RMA number clearly

on the outside of the box for faster processing. Do not include non-defective

items as it is not necessary and will increase your shipping costs.

Include a copy of the original receipt or invoice with the purchase date, dealer’s

name and customer’s name and invoice number clearly visible. Manufacturing

date may be used if no proof of purchase is provided. The customer will pay to

ship the defective product; COD will not be accepted.

Please follow the above instructions carefully to prevent voiding your warranty.

Your Warranty Service Does Not Cover the Following:

-Products not purchased from an Authorized VM Audio Dealer

-Damages from poor installation by not following the included instruction manual.

-Damages due to excessive moisture, heat and other elements from improper

care.

-Evidence of tampering or repair by non-authorized personnel.

-Products not issued an RMA number.

-Damage during freight from poor packaging or handling.

-Return shipping on non-defective items.

Warranty Turnaround Time

It is VM Audio’s goal to turnaround the merchandise in a timely fashion of one

(1) week. Unexpected delays may occur due to repair parts or replacement

shortage.

International Warranty

Please check with your Authorized International VM Audio Dealer or distributor

for specic warranty policies and processes for your country.

Customer Care Contact Info:

Email: [email protected]

Phone: (855) 283-4699

Web Site: www.vmaudio.com

• 2-Way Coaxial Dynamic Driver Design

• Propulsion Drive Flux-Cycle Motor System

• Wide-Angle Sound Dispersion Diaphragm

• Image Enhancing Wave Array Grill

• Complete Marine Weather Protection Components

• Corrosion Free One-Piece ABS Full Frame Basket

• Element Protection Treated PP Injection Cone

• UV/Salt Water Repellent Suspension System

• NBR Treated Rubber Surround

• Treated Linear Nomex Damper

• High-Strength Kapton Former with KSV Voice Coil

• Direct 13mm High Frequency PEI Driver

• Balance-Dome Tweeter with Neodymium Magnet

Congratulations on your purchase of an Elux Series product from VM Audio.

You have seen that with years of acquired taste for quality, the Elux Series has

the right design and performance to satisfy your utmost demand. With music

so clear and rich and bass so low and loud, you will be immersed in a world of

musical euphoria that anything else will seem like white noise. By following the

installation instructions carefully, you will ensure yourself performance that will

be enjoyed from each use for years to come. Reward yourself with the ner

things in life.

INTRODUCTION

• Coaxial Speaker System (2 pieces)

• Woofer Grilles (2 pieces - attached to speaker)

• Phillips-Head Stainless Steel Screws (4 pieces)

• Stainless Steel Washers (4 pieces)

• Mounting Template

INSIDE PACKAGE

FEATURES

Woofer

Tweeter

Power (RMS)

Power (Peak)

Frequency Response

Sensitivity

Nominal Impedance

(A) Trim Ring Diameter

(B) Trim Ring Height

(D) Mounting Depth

...................................

6.5 in. (165mm)

1/2 in. (13mm)

125 Watts

250 Watts

60Hz - 20kHz

4 ohms

7.68 in. (195mm)

1.10 in. (28mm)

5.59 in. (142mm)

2.52 in. (64mm)

SPECIFICATIONS

• Always disconnect the main power source or battery system before any

electrical installation is performed.

• Before drilling and inserting any screws or making any type of cutouts; ensure

there is enough clearance behind the speaker panel. Be aware of gas tanks,

fuel or hydraulic lines and electrical wires that may be located behind the

panel you will be working on, and make sure to not cut or drill through these

obstacles.

• If existing speaker wires are being replaced or new ones are being installed,

run all wires rst before mounting the speakers.

• Avoid running wires through sharp corners and edges. Always use rubber

grommets to prevent wires from exposing and causing an electrical short

circuit.

• Be certain that the speakers are mounted rmly and secure on the panel. If

they are not rmly secured, the speakers can become a dangerous projectile

in a collision and cause severe injury.

• Although these speakers are designed to withstand the harsh marine

environment, they are not waterproof and should not be submerged under

water.

• Failure to connect the speakers as shown will result in damage to the

speakers which will not be covered under warranty.

INSTALLATION CONSIDERATIONS

INSTALLATION PROCEDURES

1. Determine the mounting

location for the speaker and

mark the cutout circle and

screw holes using the template

provided.

2. Carefully make the cutout

circle using the appropriate

tool for the panel material.

3. Drill the screw holes with

an electric drill using 1/8” bit.

4. Pull the speaker wires

through the cutout circle and

connect them to the terminals.

The positive terminal is marked

with a “+” and negative with “-”.

5. Mount the speaker into the

cutout circle and secure the

speaker using four screws,

each one around every other

slot on the speaker frame.

(A)

(B)

(C)

(D)

VM Audio EXS652M Installation guide

Brand: VM Audio

Model: EXS652M

Category: Car speakers

Type: Installation guide

This manual is also suitable for

EXS692M

Download PDF

report

VM Audio EXS652M Installation guide

This manual is also suitable for

VM Audio EXS652M Installation guide

Related papers

Other documents