Salora LED2438FHDVX User manual

MODEL:LED2438FHDVX

FHD LED TV COMBO DVD

USER GUIDE

24”

Page is loading ...

Inhoud

Accessoires

Technische specificaties

Productintroductie

Vooraanzicht

Achteraanzicht

OSD Menu

1. ZENDER menu

2. BEELD menu

3. GELUID menu

4. INSTELLINGEN menu

5. FUNCTIE menu

6. PC INSTEL menu

DVD bediening

In geval van problemen

4

5

4

9-16

9-10

11

12

1. Algemene instellingen

2. AUDIO instellingen

4. Voorkeuren

3. Dolby Digital instellingen

16-23

16-18

18-19

20-23

20

13

14-15

15

24

Aansluitingen

Afstandsbediening

Basisbediening

6-7

8

3

Verwittigingen 1

Veiligheidsinformatie 2

Page is loading ...

Accessoires

3

Accessoires en technische specificaties

-TV systeem PAL, SECAM, NTSC

-Grootte scherm 24 inch (diagonaal)

-Resolutie 1920 x 1080

-Antenne-ingang

-Uitgangsvermogen 2 x 3 W

Afstandsbediening

Type Infrarood

Bedieningsafstand 5 m

30° (horizontaal)

Batterijen 2 x 1.5 V, AA formaat.

Technische specificaties

DC 12V 5A 60W

Page is loading ...

English

Page is loading ...

Contents

Caution

Safety Information

Accessories

Technical Specification

Product Introduction

Front View

Rear View

OSD Menu

1. CHANNEL menu

2. PICTURE menu

3. SOUND menu

4. SETTING menu

5. FUNCTION menu

6. PC SETUP menu

Simple Troubleshooting

1

2

3

4

5

4

9-16

9-10

11

12

DVD Operation

1. General Setup

2. AUDIO Setup

4. Preference

3. Dolby Digital Setup

16-23

16-18

18-19

20-23

20

13

14-15

15

24

Connections

6-7

Remote Control

8

Basic Operation

Caution

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-

of-life should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/

recycling center.

In the USA there are separate collection systems for used electrical and

electronic products. Please help us to conserve the environment we live in!

1

Caution

The exclamation point within an equilateral triangle is intend to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle

is intended to alert the user to the presence of un-insulated “dangerous

voltage” within the products enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to the persons.

directives.

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the

instructions in this user guide, especially the safety information below

.

Electrical safety

• The TV set should only be connected to a mains supply which matches that stated on

the label on the mains adaptor.

• To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items on the leads, which may damage them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial

(if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet

or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged.

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.

- anything accidentally penetrates the ventilation slots.

- the set does not work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside.

You may invalidate the warranty. Qualified personnel only are permitted to service

this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control

handset, or when not using for along period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around the unit.

• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good

care of the remote control, do not drop it or allow it to come into contact with liquids.

• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with diluted detergent.

2

Safety Information

Accessories

3

Accessories & Technical Specification

- TV System

- Screen Size

- Resolution

- Aerial input

- Audio output power

- Power Consumption

Remote Control

Type

Control distance

Control angle

Batteries

Technical Specification

User’s Manual

Remote control

* Note: The configuration of the components may look different from the following illustration

PAL, SECAM, NTSC

24 inch(diagonal)

1920x1080

75

(unbalanced)

2x3W

0

infrared

5m

30 (horizontal)

2 x 1.5V, size

AAA

DC 12V 5A 60W

Product Introduction

4

Product Introduction

Front View

Rear View

MENU: Display/exit the OSD menu.

INPUT: Display the input source menu.

(POWER): Turn on/standby the TV set.

DVD: Insert a 12cm disc according to the silk.

Remote Control window(keep clear)LED indicator

(IR) Infrared Receiver: Receives IR signals from the remote control.

(Power on/Standby) LED indicator: Press POWER to turn on and off.

The effective receiving range for the signal is 5-8 metres from the front of the remote

control window, and 30

0

to the left or right side and 20

0

above or below the control

window.

Indicator on(Red) Standby mode

Indicator on(Green) Power on mode

Connections

See next page

Wall Mounting

The TV is provided with mounting holes for a VESA approved wallmounting bracket (NOT SUPPLIED).

Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the

basemounting bracket).Mount the VESA bracket using 4xM4x10mm ISO metric threaded screws (not

supplied). Do not use screws longer than 10mm, it will occur damage to the internal parts. Fit the wall

bracket securely following themanufacturers instructions.

Insert disc with label side towards back

VOL VOL CH CH

INPUT MENU

(EJECT): Eject the disc.

CH+/-: Scan through channels.

VOL+/-: Adjust the volume.

Play/pause the disc playing.(PLAY):

Connections

5

Connections

RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)

VIDEO: Connect it to video output terminal of DVD.

POWER: Connect the power cord with DC 12V to this input.

YPbPr: Connect them to the YPbPr video output terminal of DVD.

HDMI: Connect it to the HDMI of DVD or other equipment.

VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.

SCART: Connect them to the SCART video output terminal of DVD.

Connect it to the audio output terminal of PC.PC Audio:

Headphone out: Connect it to your headphone or other audio equipment.

USB: USB jack.

Coax: Digital coaxial output.

SCART

HDMI

VIDEO R L

POWER

COAX Y PB PR USB Earphone RF

PC Audio

Remote Control

The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote

control may not work correctly if it is operated out of range or out of angle.

STANDBY:

1

2

3

4

DISPLAY:

Exit from the current menu.

Press to select TV sound.

Dispaly the favorite program list.

Switch the teletext on or 0ff.

Play program frame by frame in media mode.

Switch the teletext on or 0ff.

To show the Electronic Program Guide during

no-menu state only.

SLEEP:

display the current mode.

Adjust picture size.

AUTO:

MUTE:

P.MODE:

5

S.MODE:

6

7

8

ASPECT:

CH+/-:

VOL+/-:

OK:

:

0~9,10+:

9

NICAM:

10

MENU:

11

12

13

14

15

16

FAV:

17

STEP:

SUBTITLE:

19

20

TEXT:

INDEX:

21

22

HOLD:

MIX:

23

24

CANCEL:

SIZE:

25

26

REVEAL:

SUBPAGE:

27

28

EXIT:

10+

INPUT:

Press this button to select the desired picture mode.

Press this button to select the desired sound mode.

6

Auto adjust the picture screen on the TV in PC mode.

RemoteControl

7

RemoteControl

To selsct the DVD progran playback.

Repeat playback the DVD play.

DVD start palying from the desired time. Press time

and enter time. The unit starts playing from you selected.

A-B:

PROG:

29

28

27

26

25

30

REPEAT:

GOTO:

31

Dispaly the DVD SETUP menu.

D.SETUP:

22

Dispaly the DVD MENU.

D.MENU:

21

Change the DVD audio mode:left,right,mono,stereo.

AUDIO:

9

24

23

TITLE:

17

2

32

ANGLE:

18

button to select the function item, press button to select/

Basic Operation

8

Basic Operation

Power on/off

1. Connect to the power supply with the power cord and turn on the switch.

2. -To turn on the TV

Press POWER button on the TV or remote control.

-To turn off the TV

Press POWER button on the TV or remote control.

Input Source select

First Time Installation

Press INPUT button on the TV set or remote control to display input

source menu, and use CH+/- button on the TV set or remote control

to select the input source, press OK button on the remote control to

enter.

Note: Before you select the input source, make sure the

connections are prepared.

Basic OSD Menu operation

Press MENU(SYS-MENU) button to display the OSD menu as below:

Use /

/

button to select the main menu, and press (CH-) button to enter the submenu.

In the submenu, use (CH+/-)

adjust, or press button to enter the option menu.

* (Press MENU(SYS-MENU) button to return to the upper menu.)

* (Press SYS-EXIT button to exit the menu display.)

Note1: Only when you input the suitable signal or on the suitable mode, the relevant

items can be activated

Note2: Please operating the OSD menu according to hint on the bottom of the banner.

Submenu

(Video menu

for example)

Hint---you should operate the OSD menu according to the hint.

When you initially turn on the TV you will see the first time

Installation menu, and you could search the progeams

immediately according to the hints.

Main menu

Picture

Sound

Channels

Enterainment

Locks

Setup

SOURCE

TV

AV

SCART

YPBPR

VGA

HDMI

DVD

OSD Menu

9

OSD Menu

1. CHANNEL menu

Description

Manual Program Press button to enter the submenu.

Auto Search Press button to start auto search.

Program Select the program you want to edit.

Color Sys. Select the color system for the program you want to edit.

Sound Sys. Select the sound system for the program you want to edit.

Manual Search Use and button to manual search.

AFT Turn on/off the Auto Frequency Tuning function for Manual Search.

Fine Use and button to fine-tune.

Skip Select “Yes” to skip the program when you scan the programs by

CH+/-.

Manual Program menu for TV

Auto Search menu for TV

TV

OSD Menu

10

OSD Menu

NAME: Select the channel, press RED button on the remote control to change the name of

the channel.

(Use button to name, and press OK button to confirm)

DELETE: Press GREEN key to delete current channel.

FAV: Press FAV key to set your favorable channel.

INSERT: Select a channel you want to insert,

press YELLOW button, then select the position,

press GREEN button to insert, or you could

press RED button to cancel the option.

Program Edit: Press button to enter the submenu as the following picture.

Program Edit menu for TV

FAV

DELETE

OSD Menu

11

OSD Menu

2. PICTURE menu

Picture Mode

Choose from Standard, Movie, Vivid and Personal.

Contrast Controls the difference between the brightest and darkest regions of

the picture.

Brightness Controls the overall brightness of the picture

Color Control the color.

Tint Controls the tint ( NTSC mode only).

(Can be selected in ATV mode).

Sharpness

Color Temp.

Noise Reduction

Increase this setting to see crisp edges in the picture; decrease it for

soft edges .

Choose from Normal, Cool, and Warm.

Reduce any interference noise by selecting “ON”.

Note: Contrast, Brightness, Color and Sharpness can only be adjusted in the

Personal mode option in the Picture Mode Settings.

OSD Menu

12

OSD Menu

3. SOUND menu

Sound Mode Allows you to select among: Standard, Music, Movie and Personal.

Bass (Can be adjusted when the sound mode is set to User)

Controls the relative intensity of lower pitched sounds.

Treble (Can be adjusted when the sound mode is set to User)

Controls the relative intensity of higher pitched sounds.

Balance To adjust the balance of the left and right sound track, or turn off the

volume of the left and right sound track.

AVL Control the volume of the program automatically when you turn on the

function by selecting “On”.

OSD Menu

13

OSD Menu

4. SETTING menu

The SETTING menu includes the following options:

Language Allows you to select menu language.

OSD Timer Allows you to select the time for OSD menu displays on the

screen.

Transparence Allows you to select the transparence for OSD menu

displays on the screen.

Turn on/off the overscan funciton.

(Can be selected in HDMI mode )

Overscan

Reset Press button to restore factory default.

OSD Menu

14

OSD Menu

5. FUNCTION menu

Allows you to setup the sleep timer to : 15min, 30min, 45min,

60min, 75min, 90min,105min, 120min and off.

The FUNCTION menu includes the following options :

Sleep Timer

Aspect Allows you to select the screen display mode.

(Can be selected in TV mode)

AUTO SLEEP 4H

DLC OFF

TT Language Allows you to select the Teletext language.

Blue Screen Turn on the blue screen display in no signal state by selecting “ON”

(Can be selected in TV mode)

DLC

Dynamic Luminance control ON/OFF.

Auto Sleep Turn on/off the auto standby function when where’s no signal.

OSD Menu

15

OSD Menu

6. PC SETUP menu

Adjust the transverse position of the screen.

The PC SETUP menu includes the following options :

H-Position

Clock Adjust the pixel clock frequency, until the image size is maximized

for the screen.

Phase Adjust the phase of the ADC sampling clock relative to the sync

signal, until a stable image is obtained.

V-Position Adjust the vertical position of the screen.

Auto Adjust Press button to setup the parameter of the screen automatically.

Page is loading ...

Salora LED2438FHDVX User manual

This manual is also suitable for

Salora LED2438FHDVX User manual

in other languages

Related papers

Other documents