Caso Fomini Jet Operating instructions

Page is loading ...

3

6.2 Lieferumfang und Transportinspektion .......................................................... 14

6.3 Auspacken ......................................................................................................... 14

6.4 Entsorgung der Verpackung ............................................................................ 14

6.5 Anforderungen an den Aufstellort ................................................................... 15

6.6 Elektrischer Anschluss .................................................................................... 15

7 Funktion ............................................................................ 16

7.1 Gesamtübersicht:.............................................................................................. 16

7.2 Typenschild ....................................................................................................... 16

8 Bedienung und Betrieb ................................................... 16

8.1 Betrieb ........................................................................................................... 16

9 Reinigung und Pflege ...................................................... 17

9.1 Sicherheitshinweise .......................................................................................... 18

9.2 Reinigung .......................................................................................................... 18

10 Störungsbehebung .......................................................... 18

10.1 Sicherheitshinweise .......................................................................................... 18

10.2 Störungen .......................................................................................................... 19

11 Entsorgung des Altgerätes ............................................. 19

12 Garantie ............................................................................ 19

13 Technische Daten ............................................................ 20

14 Operating Manual ............................................................. 22

15 Warning notices ............................................................... 22

16 Safety ................................................................................ 22

16.1 Intended use ...................................................................................................... 22

16.2 General Safety information .............................................................................. 23

16.3 Sources of danger............................................................................................. 24

16.3.1 Danger of burns ........................................................................................ 24

16.3.2 Dangers due to electrical power ............................................................... 25

17 General .............................................................................. 25

17.1 Information on this manual .............................................................................. 26

18 Limitation of liability ........................................................ 26

18.1 Copyright protection ......................................................................................... 26

19 Commissioning ................................................................ 26

4

19.1 Safety information ............................................................................................. 27

19.2 Delivery scope and transport inspection ........................................................ 27

19.3 Unpacking .......................................................................................................... 27

19.4 Disposal of the packaging ................................................................................ 27

19.5 Setup location requirements: .......................................................................... 27

19.6 Electrical connection ........................................................................................ 28

20 Function ............................................................................ 28

20.1 Overview: ........................................................................................................... 29

20.2 Rating plate ....................................................................................................... 29

21 Operation and Handing ................................................... 29

21.1 Operation ........................................................................................................... 29

22 Cleaning and Maintenance .............................................. 30

22.1 Safety information ............................................................................................. 31

22.2 Cleaning ........................................................................................................... 31

23 Troubleshooting ............................................................... 3 1

23.1 Security advices ................................................................................................ 31

23.2 Troubleshooting ................................................................................................ 32

24 Disposal of the Old Device ............................................. 32

25 Guarantee ......................................................................... 32

26 Technical Data .................................................................. 33

27 Mode d´emploi .................................................................. 35

28 Avertissements de danger .............................................. 35

29 Sécurité ............................................................................. 35

29.1 Utilisation conforme ......................................................................................... 36

29.2 Consignes de sécurités générales .................................................................. 36

29.3 Sources de danger ............................................................................................ 37

29.3.1 Dangers de brûlure ................................................................................... 37

29.3.2 Dangers du courant électrique ................................................................. 38

30 Généralités ....................................................................... 38

30.1 Informations relatives à ce manuel ................................................................. 39

31 Limite de responsabilités ................................................ 39

31.1 Protection intellectuelle .................................................................................... 39

Page is loading ...

21

Original

Operating Manual

Milkfrother

Fomini Jet

Item No.:1650, 1652

22

14 Operating Manual

15 Warning notices

The following warning notices are used in the Operating Manual concerned here.

D A N G E R

A warning notice of this level of danger indicates a potentially dangerous situation.

If the dangerous situation is not avoided, this can lead to death or serious injuries.

► Observe the instructions in this warning notice in order to avoid the danger of death or

serious personal injuries.

W AR NI NG

A warning notice of this level of danger indicates a possible dangerous situation.

If the dangerous situation is not avoided, this can lead to serious injuries.

► Observe the instructions in this warning notice in order to avoid the personal injuries.

A T T E N T I O N

A warning notice of this level of danger indicates a possible dangerous situation.

If the dangerous situation is not avoided, this can lead to slight or moderate injuries.

► Observe the instructions in this warning notice in order to avoid the personal injuries.

PLEASE NOTE

A notice of this kind indicates additional information, which will simplify the handling of the

machine.

16 Safety

This chapter provides you with important safety notices when handling the device.

The device corresponds with the required safety regulations. Improper use can result in

personal or property damages.

16.1 Intended use

This device is only intended for use in households in enclosed spaces for

 making milk foam and heating milk.

23

This device is intended for use in the household and for similar applications such as:

• in kitchens for employees in shops, offices, and other commercial areas;  in B&Bs,

• in agricultural estates;

• by customers in hotels, motels and other residential establishments.

Uses for a different purpose or for a purpose which exceeds this description are

considered incompatible with the intended or designated use.

W AR NI NG

Danger due to unintended use!

Dangers can emanate from the device if it is used for an unintended use and/or a different

kind of use. Potential injury exist in case of misuse/ unintended use.

► Use the device exclusively for its intended use.

► Observe the procedural methods described in this Operating Manual.

Claims of all kinds due to damages resulting from unintended uses are excluded. The User

bears the sole risk.

16.2 General Safety information

PLEASE NOTE

Please observe the following general safety notices with

regard to the safe handling of the device.

► Examine the device for any visible external damages prior to

using it. Never put a damaged device into operation.

► If the power cable or plug are damaged, then they must be

replaced by the manufacturer or its service agent in order to

avoid a hazard.

► This device may be used by children aged 8 and above, if

they are supervised or have been instructed at to the safe use

of the device and have understood the resulting hazards.

► Cleaning and maintenance by the user must not be

performed by children unless they are at least 8 years old and

are supervised.

► Children are not allowed to play with the device.

24

PLEASE NOTE

► The device and its connecting cable must be kept away from

children who are less than 8 years old.

► The device may be used by individuals with reduced

physical, sensory or mental capabilities or a lack of experience

and / or knowledge of their use if they are supervised or have

been instructed at to the safe use of the device and have

understood the resulting hazards.

► Do not leave the device unsupervised when it is in operation.

► Only customer service departments authorized by the

manufacturer may carry out repairs on the device, as

otherwise the guarantee entitlements will be null and void in

the event of any subsequent damages. Improperly performed

repairs can cause considerable dangers for the user.

► Defective components must always be replaced with original

replacement parts. Only such parts will guarantee that the

safety requirements are fulfilled.

► Do not use other liquids than milk.

16.3 Sources of danger

16.3.1 Danger of burns

Warning

The heated milk in the milk frother and the interior of the

jug can get very hot.

Observe the following safety instructions and be careful

not to burn or scald yourself or others:

► When the milk is heated, the interior of the jug gets very hot!

► The surface of heating element (bottom of jug) and interior of

jug can be hot after use due to residual use.

25

Warning

► Always check the temperature of the milk, before drinking it.

► When you are heating the milk, keep the lid closed.

16.3.2 Dangers due to electrical power

D A N G E R

Mortal danger due to electrical power!

Mortal danger exists when coming into contact with live wires or

subassemblies!

Observe the following safety notices to avoid dangers due to

electrical power:

► Do not operate this device if it has a damaged cable or plug,

if it is not working properly or if it has been damaged or

dropped. If the power cable or plug are damaged, then they

must be replaced by the manufacturer or its service agent in

order to avoid a hazard.

► Do not open the housing on the device under any

circumstances. There is a danger of an electrical shock if live

connections are touched and the electrical or mechanical

structure is altered. In addition, functional faults on the device

can also occur.

► Avoid water spillage on the connector/plug or base.

17 General

Please read the information contained herein so that you can become familiar with your

device quickly and take advantage of the full scope of its functions.

Your Fomini Jet will serve you for many years if you handle it and care for it properly.

We wish you a lot of pleasure in using it!

26

17.1 Information on this manual

These Operating Instructions are a component of the Fomini Jet (referred to hereafter as

the device) and provide you with important information for the initial commissioning, safety,

intended use and care of the device.

The Operating Instructions must be available at all times at the device. This Operating

Manual must be read and applied by every person who is instructed to work with the

device:  Commissioning  Operation  Troubleshooting and/or  Cleaning

Keep the Operating Manual in a safe place and pass it on to the subsequent owner along

with the device.

18 Limitation of liability

All the technical information, data and notices with regard to the installation, operation and

care are completely up-to-date at the time of printing and are compiled to the best of our

knowledge and belief, taking our past experience and findings into consideration.

No claims can be derived from the information provided, the illustrations or descriptions in

this manual.

The manufacturer does not assume any liability for damages arising as a result of the

following:

 Non-observance of the manual

 Uses for non-intended purposes

 Improper repairs

 Technical alterations, modifications of the device

 Use of unauthorized spare parts

Modifications of the device are not recommended and are not covered by the guarantee.

All translations are carried out to the best of our knowledge. We do not assume any liability

for translation errors, not even if the translation was carried out by us or on our

instructions. The original German text remains solely binding.

18.1 Copyright protection

This document is copyright protected.

Braukmann GmbH reserves all the rights, including those for photomechanical

reproduction, duplication and distribution using special processes (e.g. data processing,

data carriers, data networks), even partially.

Subject to content and technical changes.

19 Commissioning

This chapter provides you with important safety notices during the initial commissioning of

the device. Observe the following notices to avoid dangers and damages:

27

19.1 Safety information

W AR NI NG

► Packaging materials may not be used for playing. There is a danger of suffocation.

19.2 Delivery scope and transport inspection

As a rule, the device is delivered with the following components:

 Fomini Jet  Whisk for frothing  Operating Instructions

PLEASE NOTE

► Examine the shipment for its completeness and for any visible damages.

► Immediately notify the carrier, the insurance and the supplier about any incomplete

shipment or damages as a result of inadequate packaging or due to transportation.

19.3 Unpacking

Unpack your device as follows:

 Take out the device from the box and remove the interior and exterior packaging.

 Clean the appliance thoroughly before the first use. (see chapter Cleaning and

maintenance)

19.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and

recycling-related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the

quantities of accumulated waste. Take any packaging materials that are no longer required

to “Green Dot” recycling collection points for disposal.

PLEASE NOTE

► If possible, keep the original packaging for the device for the duration of the guarantee

period of the device, in order that the device can be re-packaged properly in the event of

a guarantee claim.

19.5 Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location

must fulfil the following prerequisites:

 The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing

capacity.

 Choose the setup location in such a way that children cannot reach the device.

 The device is not intended to be installed in a wall or a built-in cupboard.

28

 Do not set up the device in a hot, wet or extremely damp environment or near

flammable material.

 The electrical socket must be easily accessible so that the power lead can be

disconnected easily, in the case of an emergency.

 The installation and assembly of this device in non-stationary setup locations (e.g. on

ships) must be carried out by specialist companies / electricians, provided they

guarantee the prerequisites for the safe use of this device.

19.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following

instructions must be observed for the electrical connection:

 Before connecting the device, compare the connection data (voltage and frequency) on

the rating plate with those of your electrical network. This data must agree in order that

no damages occur in the device

If in doubt, ask your qualified electrician.

 The connection between the device and the electrical network may employ a 3 meter

long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs

or gangs is prohibited because of the danger of fire that is involved with this.

 Make sure that the power cable is undamaged and has not been installed under the

device or over hot or sharp surfaces.

 The electrical outlet must be protected by a 16A safety cut-out switch.

 The electrical safety of the device is only guaranteed if the device is connected to a

properly installed protective conductor system. If in doubt, have the house installation

checked over by a qualified electrician. The manufacturer cannot be made responsible

for damages that are caused by a missing or damaged protective conductor.

20 Function

In this chapter, you'll find important information on the function of the device.

29

20.1 Overview:

1 Lid

2 Magnetic whisk

3 Jug

4 Power button

5 Basis (with power cable)

20.2 Rating plate

The rating plate with the connection and performance data can

be founded beneath the device.

21 Operation and Handing

This chapter provides you with important notices with regard to

operating the device. Observe the following notices to avoid

dangers and damages:

W AR NI NG

► Do not leave the device unsupervised when it is in operation, so that you can intervene

quickly in the event of dangers.

21.1 Operation

With the Fomini Jet you can heat cold as well as warm milk froth.

The appliance has got three markings for the filling:

MIN: Fill milk at least up to that marking

MAX (bottom) Fill milk up to that maximum marking to make

milk froth.

MAX (top): When you want to heat milk but not froth it, you can

fill milk up to that maximum marking.

PLEASE NOTE

► Please note the maximum markings. Please use for milk froth only the bottom MAX-

marking. Otherwise so much foam will be made that the lid would lift and milk would

overflow.

You can make warm as well as cold milk froth.

PLEASE NOTE

► Please touch the power button with your finger in such a manner that you can still see

the different settings.

30

 Warm milk froth

Please put the whisk for frothing into the lid holder.

Switch on the power button.

The power button lights red. This is the setting for the warm milk froth. The appliance

starts to make milk foam and stops automatically as soon as the foam is finished.

 Heating milk

Please put the whisk for frothing into the lid holder.

Press the power button twice, it blinks red, the milk is heated.

The whisk rotates with reduced speed in order to ensure even heat distribution and

prevent the milk from burning.

 Cold milk froth

Please put the whisk for frothing into the lid holder.

Switch on the appliance. Press the power button for approximately 2 seconds until it lights

blue. Now cold milk froth is made.

 Settings:

Setting power button: Milk:

Lights red Warm milk froth is made

Blinks red Milk is heated.

Lights blue Cold milk froth is made.

PLEASE NOTE

► Please pour out the milk and the milk froth. By using a metal spoon or another object

with sharp edges you risk damaging the coating of the pot.

► Only fill milk into the appliance.

22 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining

the device. Please observe the notices to prevent damages due to cleaning the device

incorrectly and to ensure trouble-free operation.

31

22.1 Safety information

A T T E N T I O N

Please observe the safety instructions, before cleaning your device:

► Before cleaning switch off the unit and take the power plug out of the outlet.

► Clean the unit with a soft cloth.

► Don't clean the device with inflammable detergents.

► Clean the device again thoroughly when the machine hasn't been used for a long time.

► Cleaning and user maintenance shall not be made by children without supervision.

22.2 Cleaning

 Take off the lid with the whisk. You can remove the

magnetic whisk from the side from its holder.

 Clean the lid and the whisk as well as the jug of the milk

frother with diluted detergent, with warm water and a soft

sponge or a cloth.

 Do not use any hard or sharp-edged objects or abrasive cleaning agents to clean the

jug because the coating could by damaged.

 Clean the lid and the whisk with lukewarm water. Rinse out the interior of the jug with

lukewarm water.

 Clean the outside of the appliance with a damp cloth.

 Jug and basis are not suitable for dish washer.

 Never immerse the appliance in water or other liquids.

23 Troubleshooting

This chapter provides you with important notices with regard to operating the device.

Observe the following notices to avoid dangers and damages:

23.1 Security advices

A T T E N T I O N

► Repairs of electrical appliances must be carried out by qualified personnel who are

trained by the manufacturer.

► Repairs performed by untrained persons may result in considerable hazards for the user

and damage the machine.

32

23.2 Troubleshooting

Error Possible cause Problem solving

The appliance

doesn't work.

Mains plug is not connected

correctly.

Please check that the mains plug of the

applicance is connected correctly.

Electronic defect. Please contact customer support.

PLEASE NOTE

► If above mentioned steps don't solve the problem, please contact your customer

service.

24 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials.

However, they also contain damaging substances, which were necessary for

their functionality and safety.

If these were put in the non-recyclable waste or were handled incorrectly, they

could be detrimental to human health and the environment. Therefore, do not

put your old device into the non-recyclable waste under any circumstances.

PLEASE NOTE

► Utilise the collection point, established in your town, to return and recycle old electric

and electronic devices. If necessary, contact your town hall, local refuse collection

service or your dealer for information.

► Ensure that your old device is stored safely away from children until it is taken away.

25 Guarantee

We provide a 24 month guarantee for this product, commencing from the date of sale, for

faults which are attributable to production or material faults.

Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected

by this.

The guarantee does not include damages, which were incurred as a result of improper

handling or use, as well as malfunctions which only have a minor effect on the function or

the value of the device. Consumables, transit damages, inasmuch as we are not

responsible for these, as well as damages, which were incurred as a result of any repairs

that were not performed by us, are also excluded from the guarantee entitlements.

This device is designed for use in domestic situations and has the appropriate

performance levels.

33

Any use in commercial situations is only covered under the guarantee to the extent that it

would be comparable with the stresses of being used in a domestic situation. It is not

intended for any additional, commercial use.

In the event of justified complaints, we will repair the faulty device at our discretion or

replace it with a trouble-free device.

Any pending faults must be reported within 14 days of delivery.

All further claims are excluded.

To enforce a guarantee claim, please contact us prior to returning the device (always

provide us with proof of purchase).

26 Technical Data

Device Milkfrother

Name Fomini Jet

Item No.: 1650 (white), 1652 (black)

Mains data 220-240 V, 50 - 60Hz

Power consumption 420 – 500 W

Capacity frothing Min: 100 ml, Max: 150 ml

Capacity warming Min. 100 ml, Max: 250 ml

External measurements

(H x W x D):

Diameter: 11.8 cm

Height: 19.5 cm

Width with handle: 16.24 cm

Net weight 0,82 kg

Page is loading ...

Caso Fomini Jet Operating instructions

This manual is also suitable for

Caso Fomini Jet Operating instructions

in other languages

Related papers

Other documents