Adam Hall SLT001E User manual

Adam Hall
Brand
Adam Hall
Model
SLT001E
Category
Notebook arms & stands
Type
User manual

Adam Hall SLT001E is a laptop stand that can be used to elevate your laptop to a more comfortable viewing height. It is made of sturdy metal and has a non-slip surface to keep your laptop in place. The stand is adjustable in height and can be folded flat for easy storage. It is also lightweight and portable, making it easy to take with you wherever you go.

Here are some of the possible use cases for the Adam Hall SLT001E:

  • Use it to elevate your laptop to a more comfortable viewing height when working at your desk.
  • Use it to create a more ergonomic workspace by raising your laptop to eye level.

Adam Hall SLT001E is a laptop stand that can be used to elevate your laptop to a more comfortable viewing height. It is made of sturdy metal and has a non-slip surface to keep your laptop in place. The stand is adjustable in height and can be folded flat for easy storage. It is also lightweight and portable, making it easy to take with you wherever you go.

Here are some of the possible use cases for the Adam Hall SLT001E:

  • Use it to elevate your laptop to a more comfortable viewing height when working at your desk.
  • Use it to create a more ergonomic workspace by raising your laptop to eye level.
BEDIENUNGSANLEITUNG
USER´S MANUAL I MANUEL D´UTILISATION
SLT001E / SLT001EW COMPUTER LAPTOP STAND
PARTS
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: (+49) 60 81 /94 19 1000 e-mail: [email protected]
1.Take one of the upper supports and place it over one of the lower supports (see figure A). Align the upper support holes with the lower support
mounting holes to obtain the desired height. Place one knob at a time through the mounting holes (must be spaced at least 2 holes apart). Take a
stabilizer bar and screw the top knob into the end of the stabilizer bar. Repeat with bottom knob.
2.Repeat above with the other upper support and lower support for the opposite side of the stand (see figure B). Secure all knobs tight to minimize
stand wobble.
SUPPORT ASSEMBLY
Figure B
Place Upper
support over
Lower support, so
that the Upper
Support is on the
outside of the
stand
Knobs must be
spaced at least 2
holes apart
Figure A
BEDIENUNGSANLEITUNG
USER´S MANUAL I MANUEL D´UTILISATION
SLT001E / SLT001EW LAPTOP-STÄNDER
KOMPONENTEN
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: (+49) 60 81 /94 19 1000 e-mail: [email protected]
1. Nehmen Sie eine der oberen Stützen, und halten Sie sie über eine der unteren (s. Abb. A). Richten Sie die Montagelöcher der beiden Stützen so
aus, dass sie in der gewünschten Höhe aufeinander liegen. Stecken Sie die Rändelschrauben nacheinander durch die entsprechenden Montage-
löcher (mindestens 2 Löcher Abstand zwischen den beiden Schrauben). Nehmen Sie nun eine Stabilisierungsstange, und schrauben Sie die obere
Rändelschraube in das Ende der Stange. Wiederholen Sie dies mit der unteren Stange/Schraube.
2. Montieren Sie auf die gleiche Weise die beiden Stützen für die andere Seite des Ständers (s. Abb. B). Ziehen Sie alle Schrauben fest an, um einen
sicheren Stand zu gewährleisten.
Obere
Stütze (2)
Stabilisierungs-
stange (2)
Untere
Stütze (2)
Rändel-
schraube (4)
Montagelöcher
Positionieren Sie
die obere Stütze
so, dass sie sich
auf der Außenseite
des Ständers
befindet.
Abstand zwischen
den
Rändelschrauben:
mindestens 2
Löcher
Abbildung A
Abbildung B
  • Page 1 1
  • Page 2 2

Adam Hall SLT001E User manual

Adam Hall
Brand
Adam Hall
Model
SLT001E
Category
Notebook arms & stands
Type
User manual

Adam Hall SLT001E is a laptop stand that can be used to elevate your laptop to a more comfortable viewing height. It is made of sturdy metal and has a non-slip surface to keep your laptop in place. The stand is adjustable in height and can be folded flat for easy storage. It is also lightweight and portable, making it easy to take with you wherever you go.

Here are some of the possible use cases for the Adam Hall SLT001E:

  • Use it to elevate your laptop to a more comfortable viewing height when working at your desk.
  • Use it to create a more ergonomic workspace by raising your laptop to eye level.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents