Page is loading ...
MUTE
aPA7.5
Mono
Zero Feedback
1$
1@
1#
CAUTION:REPLACE WITH
SAME TYPE FUSE.
ATTENTION: UTILISER UN
FUSIBLE DE RECHANGE DE
MEME TYPE
FUSE: T2A/230V
230V-50/60Hz @ 320W
SPEAKERS
MC-BUS
OUT
IN
CHAIN
RCABAL
AUDIO
INPUT
MADE IN ENGLAND
ab c gfhd
i1)
1!
e
Fig 4a
Fig 1
Cyrus aPA7.5 Mono
Fig 2
Fig 4b
Fig 3
Cyrus CD Player
Cyrus FM tuner
Cyrus Pre-amplifier
Cyrus aPA7.5 Mono
Cyrus aPA7.5 Mono
aPA7.5
Mono
R R
R L
MADEIN ENGLAND
R L
L
R
-
-
-
-
MADEIN ENGLAND
R L
L
R
-
-
-
-
Cyrus aPA7.5 Mono User Instructions
1
GB
GB
IMPORTANT! Read before operating this equipment!
WARNING: To reduce the risk of electrical shock do not remove any unit
covers or panels. There are no user serviceable parts in this product.
WARNING: To reduce the risk of electric shock, do not expose this equipment
to rain or moisture.
HEED WARNINGS: All warnings on the product and in the operating
instructions should be adhered to.
READ ALL THE INSTRUCTIONS: All the safety and operating instructions
should be read before the product is operated.
RETAIN INSTRUCTIONS: The safety and operating instructions should be
retained for future reference.
FOLLOW INSTRUCTIONS: All operating and use instructions should be
followed.
CLEANING: Unplug this product from the mains before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
WATER AND MOISTURE: Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement; or
near a swimming pool and the like. The product must not be exposed to
dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the product.
HEAT: The product should be situated away from heat sources such as
radiators, stoves, or any other products (including amplifiers) that produce
heat.
VENTILATION: Slots and openings in the cabinet are provided for ventilation,
to ensure reliable operation of the product and to protect it from overheating
and these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug or similar surface.
This product should not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
OBJECT OR LIQUID ENTRY: Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
ACCESSORIES: Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer's instructions, and
should use a mounting accessory recommended by the manufacturer.
ATTACHMENTS: Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
POWER SOURCES: This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
OVERLOADING: Never overload wall outlets, extension cords, or integral
convenience receptacles. This can result in an increased risk of fire or electric
shock.
POWER CORD PROTECTION: Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon
or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
NAKED FLAMES: No naked flame sources, such as candles, must be placed
on this product.
LIGHTNING: For added protection for this product during a lightning storm, or
when it is left unattended or unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
CAUTION! POLARISED CONNECTOR (CANADA and USA): To prevent
electrical shock, match wide blade of plug to wide slot, fully insert.
Do not alter or remove this plug if it does not fit your mains power socket.
Have a suitable socket installed by a competent electrician.
POWER SUPPLY:
Connect the moulded IEC connector of the AC cord supplied plugs into the
power inlet i on the rear of the unit. The mains fuse 1) is on the rear panel
next to the power switch. It must only be replaced as follows:
U.K. / Europe 230V T2A 20mm
The mains supply requirement for your Cyrus aPA7.5 Mono is marked on a
label on the rear panel. Before connecting, check that this voltage is the same
as your mains supply.
230V Products: Voltage Range 220V-240V
If you move to an area with a different mains voltage, contact your local Cyrus
distributor to have your product converted.
NOTE FOR UK CUSTOMERS:
The aPA7.5 Mono is supplied with a power cable terminated by a fused 13A
mains plug. This plug should not be removed but if it is removed, dispose of it
safely and do not re-use it. To connect a new 13A plug, proceed as follows:
Connect the brown wire to the terminal marked L or coloured red. Connect the
blue wire to the terminal marked N or coloured black. The internal plug fuse
should be 5A.
SERVICING:
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
CONDITIONS REQUIRING SERVICE: Unplug this product from the wall
outlet and refer servicing to qualified service personnel when:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product has been dropped or damaged in any way.
• If the product does not operate normally by following the operating
instructions. (Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may
result in damage requiring extensive work by a qualified technician to
restore the product to its normal operation).
• When the product exhibits a distinct change in performance.
REPLACEMENT PARTS: When replacement parts are required, be sure the
service technician has used replacements specified by the manufacturer or
have the same characteristics as the original part. Unauthorised substitutions
may result in fire, electric shock, or other hazards.
SAFETY CHECK: Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
PRODUCT SERVICE CENTRES:
For product service or technical advice, contact only authorised Cyrus service
centres. The Cyrus distributors are listed at the end of this instruction manual.
MOVING THE PRODUCT: A product and cart
combination should be moved with care. Sudden stops,
excessive force, and uneven surfaces may cause the
product and cart to overturn.
CAUTION: The exclamation mark is to draw your attention
to important instructions and safety procedures in this
manual.
ATTENTION: The lightning flash warns you of the risk o
f
electrical shock presented by components inside this
product. Unauthorised personnel must not open this unit
.
User Instructions Cyrus aPA7.5 Mono
2
GB
GB
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art design
technology and outstanding quality of manufacture has won countless awards
around the world. We are confident that you will derive great pleasure from
owning a product from one of the most recognised and respected
manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your aPA7.5 Mono safely and
correctly.
Preparations for Installation
Before installing the aPA7.5 Mono check that the following items are included
in the accessory box.
• Power Cable
• 4 Loudspeaker plugs
• 2 MC-Bus cables
After removing these items, please retain the packaging.
Install the aPA7.5 Mono in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the aPA7.5 Mono under another
unit or on any surface likely to hamper its cooling or ventilation.
INSTALLATION
Key to the rear panel drawing (Fig.1):
1. + Speaker Outputs 7. Chain Output
2. - Speaker Outputs 8. MC-Bus connections
3. Cooling Fan 9. IEC Power Inlet
4. Balanced (BAL) Input 10. Mains Fuse Holder
5. RCA (phono)/BAL Input Selector 11 Power Switch
6. Unbalanced RCA (phono) Input
Connecting to the AC Mains Supply
Connect the socket on the AC Power cable to the Power inlet i on the rear panel of
the aPA7.5 Mono. Now connect the cable to a suitable AC power point.
The mains power switch 1) on the rear panel of the aPA7.5 Mono should be
left on for normal operation, except when left unattended for a long period
when it should be switched off or disconnected from the AC supply.
Identifying System Channels
Each aPA7.5 Mono drives a single speaker. In a stereo system two aPA7.5
Monos are necessary, in an AV system, up to 5 aPA7.5 Mono amplifiers will
be necessary. Before proceeding to connect your amplifiers, take some time
to organise your system so that you can easily identify which amplifier will be
connected to each speaker.
Connecting a Pre-Amplifier or Surround Decoder
Phono (RCA) f and Balanced input connectors d are available to link the
aPA7.5 Mono to a pre-amplifier or surround decoder.
Phono (RCA) connections are recommended unless the aPA7.5 Monos are a
long distance from the pre-amplifier/decoder, or beside a loudspeaker, then
balanced XLR connections d may give improved performance.
All aPA7.5 Mono’s must use the same method of input connection.
Input Connection via phono (RCA) interconnects
Set the input selector switch e to RCA. Connect a single phono interconnect
from the phono input f of each aPA7.5 Mono to the corresponding output of
the pre-amplifier/decoder.
In the system illustration Fig.4a, a Cyrus Pre aCA7.5 preamplifier is connected
to two aPA7.5 Mono amplifiers, one for the left channel and one for the right
channel. Input connections are shown using phono interconnects.
Input Connection using Balanced XLR cables
Set the input selector switch e to BAL. Connect a 3-pin XLR cable from the
balanced input d of each aPA7.5 Mono to the corresponding XLR output of
the pre-amplifier/decoder.
Connecting Loudspeakers
Fitting the loudspeaker plugs
Check for polarity indicators (+ and -) on the loudspeaker cable and fit the
plugs provided. Observe any signal directionality markings indicated on the
cable. If an arrow is printed on the cable it should point toward the speaker.
If additional or replacement loudspeaker plugs are required for the aPA7.5
Mono ensure that the correct ‘BFA’ type are purchased.
Connecting the cables
After checking all the assembled cables for polarity they can be plugged into
the loudspeakers and amplifiers. The ‘+’ and ‘-’ terminals of each loudspeaker
must be connected to the matching ‘+’ and ‘-’ terminals of each amplifier as
follows-
Connect the left loudspeaker to the rear panel sockets
a (red speaker plug)
and b
(black speaker plug) of the left channel aPA7.5 Mono. Connect the right
loudspeaker to the rear panel sockets
a red speaker plug) and b
(black
speaker plug) of the right channel aPA7.5 Mono.
Dual outputs are provided for the convenient connection of bi-wiring speaker
cables. Fig.4a shows a wiring schematic for a bi-wired stereo system.
Chain Output
The Chain output g allows more than one aPA7.5 Mono to be connected to
each channel of a pre-Amplifier or decoder.
Note: The Chain output is operational whether phono (RCA) or Balanced XLR
input connection is made to the aPA7.5 Mono.
Bi-Amplification
The Chain facility can be used with two or more aPA7.5 Mono amplifiers per
channel, for Bi/Tri-amping by connecting the Chain output of the first aPA7.5
Mono to the phono inputs of the next aPA7.5 Mono. Such a bi-amplified
system provides the sonic benefits of totally separate power amplification for
the bass and treble units of the loudspeakers.
In the bi-amplified system illustration Fig.4b, a Cyrus Pre aCA7.5 preamplifier
is connected to four aPA7.5 Mono amplifiers - two for the left channel and two
for the right channel. Phono input connections are shown.
Note: The Chain output is operational whether phono (RCA) or Balanced XLR
input connection is made to the aPA7.5 Mono.
Gain Matching
All Cyrus power amplifiers, and all power amplifier stages in Cyrus integrated
amplifiers have the same voltage gain characteristics. This means that you
can use the aPA7.5 Mono in conjunction with any Cyrus amplifier for bi-
amping, etc. without any set-up adjustments being required.
MC-Bus System Connection (Optional)
Connecting the MC-Bus sockets h of the aPA7.5 Mono in an MC-Bus system
provides unified system power control. An MC-Bus loop is established by
connecting single phono cables from the MC-Bus output of one unit to the MC-
Bus input of another in a daisy-chain. Complete the loop by returning the MC-
Bus output of the final component to the MC-Bus input of the first (see
example system connections in Fig.3).
With MC-Bus established you can control the power function of the system
from the front panel or remote control of the main Cyrus amplifier or Surround
Processor.
Cyrus aPA7.5 Mono User Instructions
3
GB
GB
OPERATION
Key to the front panel drawing (Fig.2)
12. Standby Switch
13. Standby Light
14. Mute Light
Switching On
When power is applied, the STANDBY key 1@ may be used for power control.
The Standby light 1# shows red when the aPA7.5 Mono is in Standby and
green when operational.
Remote power control can also be enabled by connecting the MC-Bus sockets
h of the aPA7.5 Mono to a Cyrus system which includes a Preamplifier,
Integrated amplifier or Surround decoder. A number of aPA7.5 Monos may be
connected in this way to provide remote standby control of all the system
power amplifiers.
Mute Indicator
The MUTE Indicator 1$ will glow red if the protector of the aPA7.5 Mono
switches in. This occurs for a few seconds following Standby operation or if a
temporary overload condition arises. If the MUTE Indicator glows continually,
refer to the Troubleshooting Guide.
Cooling
Due to the substantial power of the aPA7.5 Mono, air-cooling is provided via a
fan c. The fan in the aPA7.5 Mono features an Intelligent Power Controller.
When the unit is idling the fan turns off. As the amplifier warms up the fan
progressively speeds up, reaching maximum speed at maximum temperature.
In this way the fan speed is always related to the power output of the unit and
fan noise is barely discernible even at low volume levels. In quiet passages
and between tracks on a CD, the fan will slow down so as not to encroach on
the listening experience.
TROUBLESHOOTING GUIDE
If your aPA7.5 Mono is not operating properly, disconnect the power and
check all connections using the notes in this handbook. If problems persist,
the checklist below may be helpful.
If you are in doubt, consult your dealer.
No sound from both speakers
Check that the pre-amplifier and the power
amplifiers are on.
Check that the pre-amplifier and the power
amplifiers are not muted.
Check that the pre-amplifier responds to
front panel commands.
Check that the relevant program source is
selected.
Check that the correct amplifier input is
selected.
The standby lights should be
green.
The red Mute lights should not
be lit.
Tape Monitor should not be
selected.
The source device must be
operating normally.
The RCA/BAL switch must be
switched to the appropriate
input.
Check that the loudspeakers are
connected.
The connection at the
terminals of the loudspeakers
and the aPA7.5 Mono should
be checked.
No sound from one speaker
There may be a short circuit in the
speaker connections.
The protection circuit will
operate and the red Mute light
will stay lit.
Specifications
Power Supply
Voltage:....................................................................As plate on rear of unit
Power Consumption
Standby............................................................................................. (6.4W)
ON (No Signal)................................................................................... (23W)
ON (150W)....................................................................................... (255W)
Safety Requirements ...................................................................EN 60065
Enclosure
Dimensions (WxHxD)..................................................... 215 x 75 x 365mm
Weight.................................................................................................5.5Kg
Material ..............................................................................Die cast chassis
Audio Performance
Input Sensitivity (50W 8Ω) RCA.......................................................381mV
Input Sensitivity (50W 8Ω) BAL........................................................775mV
Input Sensitivity (150W 8Ω) RCA....................................................660mV
Input Sensitivity (150W 8Ω) BAL .......................................................1.3V
Input Impedance (RCA) ......................................................................19kΩ
Input Impedance (BAL).......................................................................20kΩ
Output Power (Continuous) 8Ω ..................................................150Wrms
Output Power (Continuous) 4Ω ..................................................240Wrms
THD+N @2/3 full power.............................. (20Hz - 20kHz 8Ω).....<0.05%
(1kHz 8Ω).................<0.004%
Slew Rate (input filter bypassed) ................................................... 700v/µS
Frequency Response (-3dB)................................................. 0.5Hz-130kHz
S/N Ratio (Ref. 150W / 8Ω)............................................................ 114dBA
Chain Output (buffered) .................................................(unity gain) 660mV
(ref. 660mV RCA input, 1.3V Balanced input.)
Cyrus reserves the right to change all specifications without notice. E & OE
WARRANTY
The warranty card enclosed should be completed by the Dealer and the
purchaser and returned to CYRUS or its Distributor within 8 days of purchase.
No Dealer or Distributor may vary the terms of this warranty which is personal
to the original Purchaser and is not transferable.
Please retain the sales receipt as proof of purchase.
Warranty claims must wherever possible be made through the Dealer from
whom the equipment was purchased.
This warranty excludes:
• Damage caused through neglect, accident, misuse, wear and tear, or
through incorrect installation, adjustment or repair by unauthorised
personnel. Any unauthorised servicing will result in loss of guarantee.
• Liability for damage or loss occurring in transit to or from the purchaser.
• Consequential damage, loss or injury, arising from or in conjunction with
this equipment.
Equipment for attention under warranty should be consigned return carriage
paid. If returned equipment is found to comply with the published specification,
CYRUS reserves the right to raise a charge.
The above conditions do not affect your statutory rights as a consumer.
Page is loading ...
Page is loading ...
Page is loading ...
Cyrus aPA7.5 Mono Distributor List
7
CYRUS ELECTRONICS
Spitfire Close, Ermine Business Park, Huntingdon, PE29 6XY
Tel: +44 (0) 1480-435577, Fax: +44 (0) 1480-437715
E-mail: [email protected] Internet: www.cyrusaudio.com
AUSTRALIA: Crestmore Pty Ltd.
PO Box 199, North Turramurra, NSW 2074
Tel: +61 29 482 3922 Fax: +61 29 482 3699
Email: crestmore@ans.com.au
AUSTRIA:
Tepax GmbH
Georg-Büchner-Strasse 4
D-61476 Kronberg im Taunus
Tel: +49 (0) 700 077 77 77-1 Fax: +49 (0) 700 077 77 77-2
BELGIUM:
Belram Hi-Fi nv/sa
Waversesteenweg 1600, Chaussée de Wavre, Oudergem , 1160
Tel: + 32 2 736 5000 Fax: + 32 2 735 3816
CROATIA: SONATEL doo
A Heinza 3, 10 000 Zagreb
Tel: +385 1 463 3419 Fax: +385 1 463 3434
CZECH REPUBLIC: DATART International
Pernerova 35, Praha 8 - 186 00, Karlin
Tel: +42 0 221897 111/275 Fax: +42 0 221897 171
DENMARK: SAS Scandinavia
Industrivej 30, Brondby, DK 2605
Telephone: + 45 4343 1777 Fax: + 45 4343 1767
FINLAND: SAS Scandinavia
Industrivej 30, Brondby, DK 2605, Denmark
Telephone: + 45 4343 1777 Fax: + 45 4343 1767
FRANCE: Audio Marketing Services
1 Rue Jean Perrin, Le Blanc Mesnil, Paris, 93150
Tel: + 33 1 55 81 00 70, Fax: + 33 1 48 67 51 96
Email: Info@AudioMarketingServices.fr
GERMANY: Tepax GmbH
Georg-Büchner-Strasse 4
D-61476 Kronberg im Taunus
Tel: +49 (0) 700 077 77 77-1 Fax: +49 (0) 700 077 77 77-2
HOLLAND: TES Nederland BV
Coenecoop 81A, 2741 PH, Waddinxveen
Tel: + 31 182612669, Fax: + 31 182614765
Email: info@tesnl.demon.nl
HUNGARY: Infovox KFT
Terez Korut 31, 1067 Budapest
Tel: + 36 1 332 5578, Fax: + 36 1 302 2515
ICELAND: Radiobaer EHF
Armula 38, PO Box 8933, 128 Reykjavik
Tel: + 354 553 1133 Fax: + 354 588 4099
IRELAND: Audio Vision Import Ltd
Acoustic House, John F Kennedy Drive, Nass Road, Dublin 12
Tel: +353 1 450 4855 Fax: +353 1 450 4870
ITALY: MPI Electronic srl
Via de Amicis 10/12, Cornaredo 20010, Milan
Tel: + 39 02 936 1101 Fax: + 39 02 935 62336
KOREA: Sungmin Acoustics Co Ltd
2nd Floor, #559-32, Dobong-Dong, Dobong-Gu, Seoul, 132-010
Tel: + 822 34922586 Fax: + 822 34922588
NEW ZEALAND: Crestmore Pty Ltd
Unit A4, 1066 Great South Road, Mt. Wellington, Auckland
Tel: + 64 9 270 4001 Fax: + 64 9 270 4007
NORWAY: SAS Scandinavia
Industrivej 30, Brondby, DK 2605, Denmark
Tel: + 45 4343 1777 Fax: + 45 4343 1767
POLAND:
Misja Audio
al. Armii Ludowej, 13 Warszawa, 00-632
Tel: + 48 228254879 Fax: + 48 226481665
PORTUGAL:
Diper-Comecio
Rua Veloso Salgado 971-C, 4450 Leca Palmeira
Tel: + 351 2 9968246 Fax: + 351 2 9968248
RUSSIA: NEXT Company
Granatniy per 3-2, Moscow, 103889
Tel: + 7 095 290 6007 or 3109 Fax: + 7 095 2902579
SINGAPORE: Asia Sound Equipment(s) Pte Ltd
1 Coleman Street, #4-49/62 The Adelphi, 179803
Tel: + 65 2596120 Fax: + 65 2596617
SLOVENIA: Bofex doo
Ljubljana, Smartinska 152, Hala 5, Ljubljana, 61000
Tel: + 386 611873511 Fax: + 386 61445 478
SOUTH AFRICA: Hif Fi Specialists (Pty) Ltd
155 Durbon Road, Bellville, 7530
Tel: + 27 219461441 Fax: + 27 219464364
SPAIN: EAR SA
Heraclio Fournier 5, Vitoria, 01006
Tel: + 34 945 14 11 10 Fax: + 34 945 13 53 75
SWEDEN:
SAS Scandinavia
Industrivej 30, Brondby, DK 2605, Denmark
Telephone: + 45 4343 1777 Fax: + 45 4343 1767
SWITZERLAND: Montana Audio Systems GmbH
Allmendstrasse 14, CH 8320, Fehraltorf
Tel +41 1 955 0101 Fax +41 1 955 0303
Email: info@montana-audio.ch
Distributor List Cyrus aPA7.5 Mono
8
NOTES
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- Deutsch: Cyrus APA7.5 Bedienungsanleitung
Related papers
-
Cyrus CLS 50 Owner's manual
-
-
-
-
-
-
-
-
Cyrus 6 DAC Owner's manual
-