Brandt TTE-K30PX Owner's manual

FR - MANUEL D’UTILISATION

DK - BRUGSANVISNING

EN - INSTRUCTIONS FOR USE

ES - MANUAL DE INSTRUCCIONES

FagorBrandt SAS - Locataire-gérant - SAS au capital de 20.000.000 euros -

siège social: 7 rue Henri Becquerel - 92500 Rueil-Malmaison - RCS Nanterre sous le numéro 440 303 196.

Febrero 2008

Le fabricant se réserve le droit de modifier les modèles décrit dans le présente notice.

Fabrikanten forbeholder sig retten til at ændre modellerne som beskrives i denne brugsvejledning.

The manufacturer reserves the right to modify the models described in this User’s Manual.

El fabricante se reserva los derechos de modificar los modelos descritos en este Manual de Instrucciones.

MOD.: TTE-K30PX

GRILLE-PAIN / BRØDRISTER / TOASTER / TOSTADOR

Fig. 3 Fig. 4

Fig. 5 Fig. 6 Fig. 7

Fig. 8

Fig. 2

FagorBrandt SAS - Locataire-gérant - SAS au capital de 20.000.000 euros

- siège social: 7 rue Henri Becquerel - 92500 Rueil-Malmaison -

RCS Nanterre sous le numéro 440 303 196

Page is loading ...

7

EN

1. DESCRIPTION OF THE APPLIANCE Fig. 1

1. Bread slots

2. Stop button

3. Bread carriage lever

4. Bread roll warming button

5. Defrost button

6. Light/dark selector

7. ON indicator light

8. Crumb tray

9. Bread roll warmer

• This appliance is to be used only for

domestic use. Do not use it in the open

air.

• In the event of a breakdown and/or

the appliance not working properly,

switch it off and do not attempt to fix

it. Contact only a Technical Service

authorised by the manufacturer.

• The user must not replace the cord.

In the event that the cord is damaged

or must be replaced, contact only a

Technical Service authorised by the

manufacturer.

• Do not touch the device with wet hands

or feet. Do not immerse the appliance

in water.

• Never use the cord to pull the plug from

a socket.

• Keep the appliance out of children’s reach.

• Do not let the cord touch hot parts of

the appliance.

• Unplug the appliance when not in use

and before any cleaning or maintenance

operations.

• Warning: when the appliance is in

use, areas close to the bread slots

may reach very high temperatures

and there is a risk of burns.

• Do not use this appliance or place it on

or near hot surfaces (gas or electric hot

plates, ovens, etc.)

• Do not place metal objects such as

spoons, knives, etc., into the bread

slots. Do not place any object on top of

the toaster.

• Do not leave the appliance unattended

when in use as it may be a source of

danger.

• Warning: bread may burn inside the

toaster. Do not leave the appliance

unattended when in use.

• Make sure there are no inflammable

objects on or near the toaster, e.g.

curtains, etc.

• When the appliance is no longer

useful, cut the power cable after first

unplugging it.

• Remove the appliance from the base or

disconnect it when not in use or before

cleaning it.

• Do not use an abrasive cleaner to

clean the stainless steel exterior of the

Before using the appliance for the first time,

read this instruction manual carefully and

keep it for future reference.

• Before using the appliance, check that

your home voltage is the same as the

one indicated on the appliance.

• The electrical safety of the appliance is

guaranteed only in the event that the

appliance is connected to an efficient earth.

• After unpacking the appliance,

check that the appliance is in perfect

condition. In the event of any doubt,

contact your nearest Technical Service.

3. SAFETY PRECAUTIONS

2. TECHNICAL CHARACTERISTICS

Power: 830-900W

Voltage: 230-240V~50-60Hz

Connection type: This appliance may be

connected either to the single base, double

or triple base or to a K-Station.

IMPORTANT: Use only the connection

bases specified in

Figure 2

8

4. OPERATION

BEFORE USING FOR THE FIRST TIME

Completely remove all packaging and

check that no remnants remain inside the

bread slots.

Clean the exterior with a slightly damp

cloth.

In order to get rid of any possible

manufacturing residues, operate the toaster

without bread a couple of times, selecting

position 7 on the light/dark selector button.

ASSEMBLING THE APPLIANCE

In order to operate the appliance, it is

necessary to connect the toaster to

connector base. Use only the connection

bases specified in Figure 2.

Make sure that your appliance is placed on

a dry, flat surface. The toaster is ready for

use.

USE OF THE APPLIANCE

The toaster is equipped with an ON indicator

base, which lights up when the toaster is

connected.

• Place one or two slices of bread in the

bread slots

(1).

• Select how brown you would like your

toast with the light/dark selector

(6).

• Lower the bread carriage lever (3) until

it stays down

(Fig. 5). The toasting

process has now begun.

• When the toasting process has ended,

the bread will automatically pop up

and the toaster will disconnect. If you

wish to toast more bread, wait one or

two minutes before using your toaster

again.

• When you have finished using your

toaster, remove it from its base, unplug

the base and wait for it to cool down

before putting it away.

appliance as this could scratch the

surface.

• Do not use unauthorised connections

as this will invalidate the warranty and

may cause fire, electric shock or injury.

• Do not toast buttered bread.

APPLIANCE FUNCTIONS

Stop button (2): The stop button (2) is

designed to interrupt the toasting process

before the time is up. This function allows

you to inspect your toast during the

toasting process or cancel the process

completely.

Defrost (5): The defrost button (5) is

designed firstly to defrost and then to toast

the bread, prolonging the toasting process.

First, insert the frozen bread, adjust the

light/dark selector

(6) and pull down the

bread carriage lever

(3). Now simply press the

defrost button

(5) to use this function. When

the defrost process has finished, the toaster

will disconnect automatically.

Raising the bread carriage further: When the

toasting process is completed, raise the bread

carriage lever

(3) to automatically raise the

toast at an angle, so as to remove the toast

more easily from the bread slots.

(Fig. 6).

Bread roll warmer

• Place the bread roll warmer (9) on the

toaste and place the bread rolls on it.

Fig 7

• Adjust the browning level with the light/

dark selector

(6). If you notice that the

bread rolls are toasting excessively, you

can interrupt the process by pressing the

STOP button

(2).

• When you have finished using it, wait

for the bread roll warmer to cool down

before removing it.

• The bread roll warmer must not be used

for more than 10 minutes at a time.

PRECAUTION: Always place the bread roll

warmer in a horizontal position (not at an

angle) in order to ensure that the bread roll

is warmed. Do not cover the warm bread roll

with aluminium foil or any similar product.

9

5. HELPFUL TIPS

Types of bread

Sliced bread is most suitable for this

toaster. If you use any other type of bread,

bear in mind the following tips:

• Cut the bread into regular slices of

equal thickness.

• Do not toast different types of bread, or

slices of different thickness at the same

time.

• Do not spread butter, oil or similar onto

the bread before toasting it.

Lighter/darker selector button:

You can select how brown you want your

toast by setting the lighter/darker selector

button between 1 and 7. The higher the

number, the browner the toast.

Use positions 1 and 2 for very light toast.

Use positions 3 to 5 for medium brown

toast.

Use positions 6 to 7 for dark brown toast.

When selecting how brown you want your

toast, bear in mind that dry bread and

thicker slices will be toasted before fresh

bread and/or thicker slices. Consequently,

the position you select will vary according

to type of bread, quality of bread and the

thickness of the slices.

7. INFORMATION FOR THE CORRECT

DISPOSAL OF ELECTRICAL AND

ELECTRONIC APPLIANCES

At the end of its working

life, the product must not be

disposed of as urban waste.

It must be taken to a special

local authority differentiated

waste collection centre or

to a dealer providing this

service. Disposing of a household appliance

separately avoids possible negative

consequences for the environment and

health deriving from inappropriate disposal

and enables the constituent materials to be

recovered to obtain significant savings in

energy and resources.

To remind you that you must collaborate

with a selective collection scheme, the

symbol shown appears on the product

warning you not to dispose of it in

traditional refuse containers.

For further information, contact your local

authority or the shop where you bought the

product.

6. CLEANING

• Leave the toaster to cool before

cleaning it.

• Remove the appliance from its

connector base.

• Remove the crumb tray, (8) carefully

sliding it out of the toaster

(Fig. 8) and

empty the crumbs. Clean it and put it

back.

• Clean the stainless steel surface of the

toaster with a damp cloth. Do not rinse

the toaster under the tap. Do not use

abrasive cleaning agents, degreasers,

alcohol, etc., to clean the toaster.

• Dry all components well before putting

the toaster away or using it again.

Page is loading ...

Brandt TTE-K30PX Owner's manual

Brandt TTE-K30PX Owner's manual

in other languages

Related papers

Other documents