JLWM 1606
User Manual
Washing Machine
Contents
Safety instructions 4
Installation 4
Electrical connection 4
Water connection 4
Use 4
Service 5
Disposal 5
Safety information 6
Children and vulnerable people safety 6
General Safety 6
Product description 8
Appliance overview 8
How to activate the child safety device 8
Installation on suspended flooring 8
Fixing plate kit (4055171146) 8
Accessories 9
Control panel 10
Control panel description 10
Display 11
Programmes 14
Programme Chart 14
Consumption values 18
Options 20
On/Off 20
Programme knob 20
Temperature 20
Spin 20
Intensive / Prewash 20
Extra rinse 20
Quick 21
Delay start 21
Start/Pause 21
Settings 22
Acoustic signals 22
Child Lock 22
Permanent Extra Rinse 22
Daily use 23
Before first use 23
Loading the laundry 23
Filling the detergent and other treatments 23
Checking the position of the flap 23
Activating the appliance 24
Setting a programme 24
Starting a programme without the delay start
24
Behaviour of the appliance 25
Starting a programme with the delay start 25
Cancelling the delay start 25
Interrupting a programme and changing an
option 25
Cancelling a running programme 25
Opening the door 25
End of cycle 26
Draining water out after end of cycle 26
AUTO Stand-by function 26
Hints and tips 27
The laundry load 27
Stubborn stains 27
Detergents and additives 27
Ecological hints 27
Water hardness 28
Care and cleaning 29
External cleaning 29
Descaling 29
Maintenance wash 29
Door seal 29
Cleaning the detergent dispenser 30
Cleaning the inlet hose and the valve filter 30
Cleaning the drain filter 31
Emergency drain 32
Frost precautions 33
Troubleshooting 34
Introduction 34
Possible failures 34
Emergency door opening 36
Technical Data 38
Washing Machine User Manual
2
Safety instructions
Installation
• Remove all the packaging and the transit bolts.
• Keep the transit bolts in a safe place. If the
appliance is to be moved in future they must be
reattached to lock the drum to prevent internal
damage.
• Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with
the appliance.
• Do not install or use the appliance where the
temperature can be less than 0°C or where it is
exposed to the weather.
• The floor area where the appliance is to be
installed must be flat, stable, heat resistant and
clean.
• Make sure that there is air circulation between
the appliance and the floor.
• Adjust the feet to have the necessary space
between the appliance and the flooring.
• Do not install the appliance where the appliance
door cannot be fully opened.
Electrical connection
• The appliance must be earthed.
• Always use a correctly installed shockproof
socket.
• Make sure that the electrical information on the
rating plate agrees with the power supply. If
not, contact an electrician.
• Do not use multi-plug adapters and extension
cables.
• Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after the
installation.
• Do not touch the mains cable or the mains plug
with wet hands.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• UK and Ireland only. This appliance is fitted with
a 13 A mains plug. If it is necessary to change
the mains plug fuse, use only a 13 A ASTA (BS
1362) fuse.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water
meters, etc.), let the water flow until it is clean
and clear.
• Ensure that there are no visible water leaks
during and after the first use of the appliance.
Use
Warning! Risk of injury,
electrical shock, fire, burns or
damage to the appliance.
• This appliance is for household use only.
• Follow the safety instructions on the detergent
packaging.
• Do not put flammable products or items that
are wet with flammable products in, near or on
the appliance.
• Make sure that all metal objects are removed
from the laundry.
• Do not put a container to collect possible
water leakage under the appliance. Contact the
Authorised Service Centre to ensure which
accessories can be used.
Washing Machine User Manual
4
• Do not touch the glass door while a
programme is in operation. The glass can get
hot.
Service
• To repair the appliance contact an Authorised
Service Centre.
• Use original spare parts only.
Disposal
Warning! Risk of injury or
suffocation.
• Disconnect the appliance from the mains
electrical and water supplies.
• Cut off the mains electrical cable close to the
appliance and dispose of it.
• Remove the door catch to prevent children or
pets from becoming trapped in the drum.
• Dispose of the appliance in accordance with
local requirements for the disposal of Waste
Electrical and Electronic Equipment (WEEE).
Washing Machine User Manual
5
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible location
for future reference.
Children and vulnerable people safety
• This appliance can be used by children aged 8 years and above and
by persons with reduced capabilities provided that they have been
given instruction and/or supervision regarding the safe use of the
appliance and understand the potential hazards involved.
• Do not let children play with the appliance.
• Children under 3 years of age should be kept away from the
appliance unless continuously supervised.
• Keep all packaging away from children and dispose of it
appropriately.
• Keep detergents away from children.
• Keep children and pets away from the appliance door when it is
open.
• If the appliance has a child safety device, this should be activated.
• Children shall not carry out cleaning and user maintenance of the
appliance without supervision.
General Safety
• Do not change the specification of this appliance.
• Do not exceed the maximum load of 9 kg (refer to the
"Programme chart" chapter).
Washing Machine User Manual
6
• The operating water pressure at the water entry point from the
outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar
(0.8 MPa).
• The ventilation opening in the base (if applicable) must not be
covered by a carpet, mat, or any floor covering.
• The appliance must be connected to the water mains using the new
supplied hose sets, or other new hose sets supplied by the
Authorised Service Centre.
• Old hose sets must not be reused.
• If the mains power supply cable is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or similarly
qualified persons to avoid an electrical hazard.
• Before any maintenance operation, deactivate the appliance and
disconnect the mains plug from the socket.
• Do not use high pressure water sprays and/or steam to clean the
appliance.
• Clean the appliance with a moist cloth. Use only neutral,
detergents. Do not use abrasive products, abrasive cleaning pads,
solvents or metal objects.
Washing Machine User Manual
7
Product description
Appliance overview
1 2 3
5
6
7
4
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Rating plate
6. Drain pump filter
7. Feet for levelling the appliance
How to activate the child
safety device
This device prevents children or pets from being
closed in the drum.
Turn the device clockwise, until the groove is
horizontal.
You cannot close the door.
To close the door, turn the device anticlockwise
until the groove is vertical.
Installation on suspended
flooring
Suspended wooden floors are particularly
susceptible to vibration.
To limit vibration we recommend placing a
waterproof wooden panel, at least 15 mm thick,
under the appliance. It should be screwed to at
least 2 floor beams and should extend beyond
the front feet.
If possible, install the appliance where the floor
is more stable.
Fixing plate kit (4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth, secure the
appliance in the fixing plates.
Washing Machine User Manual
8
Read carefully the instructions supplied with the
accessory.
Accessories
1 2
4 3
1. Spanner
To remove the transit bolts.
2. Plastic hose guide
To connect the drain hose on the edge of a sink.
3. Plastic caps
To close the holes on the rear side of the cabinet
after the removal of the transit bolts.
4. Inlet hose
To connect the appliance to the cold water
tap.
Washing Machine User Manual 9
Control panel
Control panel description
Pause
Start /
Cottons
Quiet
Synthetics
Easy iron
Delicates
Hand wash
Blanket
Child safety
Temperature
Spin
Extra
rinse
Quick
Delay start
Intensive
Prewash
Anti-allergy
Spin
Drain
/
Rinse
Lingerie
Heavy cotton
Cool wash
Quick intensive
20 Minute wash
OffOn /
1 2 3
45678910
Cottons
economy
1. On/Off button
2. Programme knob
3. Display
4. Start/Pause button
5. Delay start button
6. Quick button
7. Extra rinse button
8. Intensive / Prewash button
9. Spin button
10. Temperature button
Washing Machine User Manual10
Display
A H
JKL
C D E F GB
I
The display shows:
A
Temperature of the set programme
Cold water
B
Spin speed of the set programme
No Spin symbol
1)
Rinse hold symbol
1) Only available for SPIN/DRAIN programme.
C
The phase symbols
When a programme is set, all the symbols of the phases related to the programme come on.
When the programme starts, only the symbol of the phase in operation flashes.
When the programme is completed, the symbol of the last phase is on.
Prewash phase
Washing phase
Rinse phase
Spin phase
D
The steam symbol comes on when you set a Steam programme (if available in your
appliance).
Washing Machine User Manual 11
E
The detergent overdosing symbol comes on at the end of the cycle when the appli-
ance detects too much detergent.
F
You cannot open the appliance door when the symbol is on. You can open the door
only when the symbol goes off.
If the programme is completed but the symbol stays on:
• The «Rinse hold» function is on.
• There is water in the drum.
G
The delay start symbol comes on when you set the delay start function.
H
Programme time
When the programme starts, the programme time decreases with steps of 1 minute.
Delay start
When you press the delay start button, the display shows the delay start time
Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer to «Trouble-
shooting».
The display shows this message for some seconds when:
• you cannot set a function with the washing programme
• you try to change the washing programme while it operates.
When the programme is completed.
I
The child safety lock symbol comes on when this device is activated.
Graphic bars
The empty indicator bar appears only if the related function is available for the set
programme.
The indicator bar fills accordingly to the set functions.
If you make a wrong selection the message Err indicates that the selection is not pos-
sible.
Washing Machine User Manual12
J
The time save symbol comes on when you set one of the programme duration.
Shortened time
Extra Quick
K
The extra rinse symbol comes on when this function is activated.
The value shows the total number of the rinses.
The indicator bar is fully filled when you set the maximum number of rinses.
L
the Stain symbol comes on when you activate the function.
The Prewash symbol comes on when this function is activated.
The indicator bar is not fully filled when you set only one of the functions.
The indicator bar is fully filled when you set the two functions.
Washing Machine User Manual 13
Programmes
Programme Chart
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Washing programmes
Cottons
95°C - Cold
9 kg
1600 rpm
White cotton and coloured cotton. Normal soil and light
soil.
Quiet
95°C - Cold
9 kg
White and coloured cotton. Normal soil and light soil. The
programme eliminates all spinning phase to perform a silent cy-
cle. The cycle stops with water in the tub.
Synthetics
60° C - Cold
4 kg
1200 rpm
Synthetic items or mixed fabric items. Normal soil.
Easy iron
60° C - Cold
4 kg
800 rpm
Synthetic items requiring a gentle wash. Normal and light
soil.
1)
Delicates
40° C - Cold
4 kg
1200 rpm
Delicate fabrics such as acrylics, viscose, polyester
items. Normal soil.
Hand wash
40° C - Cold
1,5 kg
1200 rpm
Machine washable wool, hand washable wool and deli-
cate fabrics with «hand washing» care symbol.
2)
Blanket
60°C - 30° C
3 kg
800 rpm
Special programme for one synthetic blanket, duvet, bed-
spread and so on.
Washing Machine User Manual14
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Anti-allergy
60° C
9 kg
1600 rpm
White cotton items. This programme removes micro-organ-
isms thanks to the washing by 60°C and adds one rinse. In this
way the wash is more effective.
Spin/Drain
3)
9 kg
1600 rpm
To spin the laundry and to drain the water in the drum. All fab-
rics, except woollens and delicate fabrics.
Rinse
Cold
9 kg
1600 rpm
To rinse and spin the laundry. All fabrics, except woollens and
very delicate fabrics. Reduce the spin speed accordingly to the
type of laundry.
Lingerie
40° C - Cold
3 kg
800 rpm
Special programme for curtains. The prewash phase is activa-
ted automatically.
4)
Heavy cotton
60° C - Cold
9 kg
1200 rpm
Items in denim and jersey
Quick Intensive
60° C - 40° C
5 kg
1200 rpm
Quick washing programme for white/fast colour cot-
ton and mixed fabrics with light soil level.
20 Minute wash
40°C - 30°C
3 kg
1200 rpm
Cotton and synthetic items with light soil level or worn
only once.
Cool wash
Cold
3 kg
1200 rpm
Mixed fabric (cotton and synthetic items)
5)
.
Washing Machine User Manual 15
Programme
Temperature range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
6)
Cottons economy
60°C - 40° C
9 kg
1600 rpm
White cotton and fast-coloured cotton. Normal soil. The
energy consumption decreases and the time of the washing pro-
gramme is extended.
1) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase. The appliance adds
some rinses.
2) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or doesn't rotate
properly, but this is normal for this programme.
3) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin option then only the drain
phase is available.
4) Do not use any detergent for prewash phase to rinse only with water.
5) This programme is for daily use and has the lowest energy and water consumption whilst maintaining a good washing perform-
ance.
6) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these pro-
grammes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They are the
most efficient programmes in terms of combined energy and water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared for the selected pro-
gramme.
Programme options compatibility
Programme Inten-
sive /
Prewash
1)
Extra
rinse
2)
Quick
3)
Delay
start
Cottons ■ ■ ■ ■ ■ ■
Quiet ■ ■ ■ ■
Synthetics ■ ■ ■ ■ ■
Easy iron
■ ■
■
4)
■ ■ ■
Delicates ■ ■ ■ ■ ■ ■
Hand wash
■ ■ ■
Blanket ■ ■
Anti-allergy ■ ■ ■ ■ ■
Spin/Drain
5)
■ ■ ■
Rinse ■ ■ ■ ■
Washing Machine User Manual16
Programme Inten-
sive /
Prewash
1)
Extra
rinse
2)
Quick
3)
Delay
start
Lingerie ■ ■ ■ ■
Heavy cotton
■ ■
■
4)
■
6)
■
Quick Intensive ■ ■ ■
20 Minute wash ■ ■
Cool wash ■ ■ ■ ■
Cottons economy
■ ■ ■ ■
■
7)
■
1) If you use liquid detergent, set a programme without Prewash. The Stain option is not available with a temperature lower than
40°C.
2) With a low spin speed the appliance performs delicate rinses and a short spin.
3) If you set a shorter duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however
the washing results can be less satisfactory.
4) Only the Prewash option is available.
5) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin option then only the drain
phase is available.
6) The Extra Rinse option will be activated automatically.
7) With these programmes you can set only the shorter duration.
Washing Machine User Manual 17
Consumption values
The data in this table are approximate. Different variables can affect the data: the
quantity and type of laundry, the water and ambient temperature.
At the start of the programme, the display shows the programme duration for the
maximum load capacity.
During the washing phase the programme duration is automatically calculated and can
be greatly reduced if the laundry load is lower than the maximum load capacity (e.g.
Cotton 60°C, maximum load capacity 9 kg, the programme duration exceeds 2 hours;
actual load 1 kg, the programme duration will be less than 1 hour).
When the appliance is calculating the real programme duration a dot flashes in the dis-
play.
Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Cottons 60°C 9 1.6 69 168 44
Cottons 40°C 9 1.0 69 164 44
Synthetics 40°C 4 0.6 48 105 35
Delicates 40°C 4 0.7 58 86 35
Hand wash 30°C
2)
1,5 0.35 57 61 30
Standard cotton programmes
Standard 60°C cotton
9 1.05 57 233 44
Standard 60°C cotton
4,5 0.75 47 198 44
Washing Machine User Manual18
Programmes Load (kg) Energy con-
sumption
(kWh)
Water con-
sumption (li-
tre)
Approximate
programme
duration (mi-
nutes)
Remaining
moisture
(%)
1)
Standard 40°C cotton
4,5 0.50 47 178 44
1) At the end of spin phase.
2) Not available for some models.
Off Mode (W) Left On Mode (W)
0.05 0.05
The information given in the chart above is compliant with the EU Commission regulation 1015/2010 imple-
menting directive 2009/125/EC.
Washing Machine User Manual 19
Options
On/Off
Press this button to activate or deactivate the
appliance. A tune sounds when the appliance is
activated.
The AUTO Stand-by function automatically
deactivates the appliance to decrease the energy
consumption when:
• You do not use the appliance for 5 minutes
before you press the Start/Pause button.
All settings are cancelled.
Press the On/Off button to activate the
appliance again.
Set the washing programme and all possible
functions again.
• 5 minutes after the end of the washing
programme.
Refer to "AUTO Stand-by option".
Programme knob
Turn this knob to set a programme. The related
programme indicator comes on.
Temperature
Press this button to change the default
temperature. When the display shows
and
, the appliance does not heat the water.
Spin
Press this button to:
• Decrease the maximum speed of the
programme spin phase.
The display indicates only the
spin speeds available for the set
programme.
• Deactivate the spin phase.
• Activate the Rinse Hold option.
Set this option to prevent fabrics from creasing.
The washing programme ends with water in the
drum. The drum turns regularly to reduce
creasing.
The door stays locked. You must drain the
water to unlock the door.
Intensive / Prewash
Press this button to add the stain and the
prewash phase to a programme.
Press the button repeatedly to activate one or
both options. The related indicator and the
indicator bar illuminate in the display.
• Intensive: Use this option for laundry with
hard stains to remove.
When you set this option, put the stain
remover into compartment
. This option
increases the programme duration.
This option is not available with
a temperature lower than 40°
C.
• Prewash: Use this option to add a prewash
phase before the washing phase.
We recommend that you use this option when
you have very soiled laundry.
This option increases the
programme duration.
Extra rinse
Press the Extra rinse button to add rinsing
phases to a programme.
Use this option for persons allergic to
detergents and in areas where the water is soft.
Washing Machine User Manual
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/