Privileg PWT 3626 User guide

Category
Washing machines
Type
User guide

Privileg PWT 3626 is a washing machine with several useful features and various use cases to make your laundry care easier and more flexible. The washing machine comes with a number of pre-defined programs for different types of fabrics and levels of dirt, including Baumwolle (Cotton), Pflegeleicht (Easy-care), Feinwäsche (Delicates), Mischwäsche (Mixed), Schnelle Wäsche 15 min (Quick Wash 15 min), and Wolle/Handwäsche (Wool/Handwash).

Privileg PWT 3626 is a washing machine with several useful features and various use cases to make your laundry care easier and more flexible. The washing machine comes with a number of pre-defined programs for different types of fabrics and levels of dirt, including Baumwolle (Cotton), Pflegeleicht (Easy-care), Feinwäsche (Delicates), Mischwäsche (Mixed), Schnelle Wäsche 15 min (Quick Wash 15 min), and Wolle/Handwäsche (Wool/Handwash).

GB
5019 600 00073
Programme
Care
Labels
Max.
Load
kg
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Detergents and Additives Special options
Max.
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Clean+ Rapid
Kurz
Pre-
wash
Vor-
wäsche
Start
delay
Start
vorwahl
Intensive
rinse
Intensiv-
spülen
Rinse
hold
Spül-
stopp
Spin
Schleu-
dern
Cotton
40 - 60 - 95°C
KOCH-/
BUNTWÄSCHE
40 - 60 - 95°C
6.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen. Selecting “Cotton 95°, this programme eliminates bacteria, ensuring sanitization of
your laundry. The bacterial removal efficiency has been tested following a similar methodology to the
NF EN 13697 standard of Nov. 2001
i
Yes
i i i i i
2)
i i i
max.
Synthetics
30 - 40 - 60°C
PFLEGELEICHT
30 - 40 - 60°C
3.0
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon).
i
Yes
i i i i i
2)
i i i
1000
1)
Delicates
30 - 40°C
FEINWÄSCHE
30 - 40°C
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
i
Yes
i
i i
2)
i i
1000
1)
Daily load
40°C
MISCHWÄSCHE
40°C
3.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
Yes
i
i
2)
i i i
max.
Speed 15'
30 °C
SCHNELLE
WÄSCHE 15’
30°C
3.0
Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.
Use lovest recommended detergent amount.
Yes
i
i
2)
i i
max.
Wool/Handwash
Cold - 40°C
WOLLE/HAND
Kalt - 40°C
1.0
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles
made of silk, linen, wool and viscose marked as handwashable
Yes
i
i
2)
i i
1000
1)
Cotton
40 - 60°C
BAUMWOLLE
40 - 60°C
6.0
Normally soiled cotton laundry.
Most favourable programme in terms of combined water and energy consumption for washing
cotton laundry. - Reference programme for the Energy Label.
Yes
i
i
2)
i i i
max.
Rinse & Spin
SPÜLEN &
SCHLEUDERN
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
i
i i i i
max.
Spin
SCHLEUDERN
6.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
i
i
max.
Gentle spin
SCHON-
SCHLEUDERN
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
i
i
1000
1)
Drain
ABPUMPEN
Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
i
A. Programme selector
B. Time display
C. “Start delay” button
D. “Spin” button
E. “Start” button
F. Programme sequence indicator
G. “Reset” button
H. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
I. “Service” indication
J. Water tap closed” indication
K. “Clean pump” indication
1)
For improved garment care, spin speed is restricted
in these programmes.
2)
Do not use liquid detergent.
PROGRAMME CHART
Yes = dosing required / i = optional
KURZCLEAN+
60°
40°
40°
30°
60°
30°
40°
40°
40°
KALT
95°
15 MIN.
INTENSIV-
SPÜLEN
SPÜL-
STOPP
SCHLEUDERN
SCHEN
START-
VORWAHL
VOR-
SCHE
SERVICE
PUMPE
ABPUMPEN
SCHONSCHLEUDERN
SCHLEUDERN
WASSERHAHN ZU
R FREI
SPÜLSTOPPSPÜLEN
SPÜLEN&
SCHLEUDERN
WASCHENVORWÄSCHE
ABPUMPEN
SCHLEUDERN
START
KOCH-/BUNTSCHE
PFLEGELEICHT
FEINSCHE
MISCHWÄSCHE
SCHNELLE SCHE
WOLLE/HAND
BAUMWOLLE
60°
40°
RESTZEIT
H. MIN.
A
B
H
F
E
G
C
D
J
I
K
5019 600 00073
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The “Reset” button cancels a programme before the
end.
• Press the “Reset” button for at least 3 seconds. Any
existing water is drained out before the door can be
opened.
START DELAY
The “Start delay” button allows the user to run the
machine at his convenience, for example at night when
electricity is cheaper.
• Select programme, spin speed and options.
• Press the “Start delay” button several times to select
a delay time by 1 to 23 hours.
• Start the programme (see “Progremme Start”). The
indication lamp over the “Start delay” button lights
up and goes off when the programme starts.
• Once having pressed the “Start” button, the
countdown of the time delay begins. The time
delay indication on the display disappears when the
programme starts and is replaced by the remaining time.
• After the “Start” button has been pressed, the
number of hours preselected can be reduced by
pressing again the “Start delay” button.
To cancel the “Start delay
..before you press the “Start” button:
• Turn the programme selector to another position or
press the “Reset” button.
..after having pressed the “Start” button:
• Press the “Reset” button for at least 3 second. The
start delay indicator light goes off.
PROGRAMME START
Open the tap and press the “Start” button. The
indication lamp next to the “Start” button lights up.
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain. When the programme phase is
finised, the corresponding indication goes out.
• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.
Programme
Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without “Rapid”
(kWh)
Approx. Programme Duration (hrs : min)
without “Rapid” with “Rapid”
Cotton 95 6.0 55* 1.90 2:00 1:50
Cotton 60 6.0 48 1.14 2:30 1:45
Cotton 40 6.0 48 0.64 2:15 1:30
Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59
Delicates 40 1.5 50 0.55 0:45
Delicates 30 1.5 50 0.50 0:41
Daily load 40 3.0 40 0.45 1:00
Speed 15’ 30 3.0 30 0.15 0:15
Wool/Handwash 40 1.0 40 0.55 0:35
Wool/Handwash Cold 1.0 40 0.10 0:30
eCotton** 60 6.0 48 0.90 3:30
eCotton** 60 3.0 35 0.78 2:30
eCotton 40 6.0 48 0.70 2:30
eCotton** 40 3.0 35 0.57 2:05
1. Load the machine, close the drum doors and check
that they are properly locked.
2. Add detergent as indicated an the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
3. Close the lid.
4. Turn the programme selector to the desired
programme and temperature. The time display
shows the duration of the chosen programme
(in hours and minutes), and the lamp next to the
“Start” button flashes. The indication lamp of the
predefined spin speed lights up. If you do not start
the programe soon after having made your choice,
the washing machine will switch off automatically
after about a quarter of an hour. Switch on the
washing machine again by turning the programe
selector back to „Off/O“ and then to the desired
programe.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
• Add an appropriate amount of in-wash additive
for stain removal (powder) to the main wash
chamber, together with your detergent (only use
powder detergent with this option). Respect the
manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches
on oxygen basis. Chlorine or perborate bleaches
must not be used!
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly soiled
laundry.
“Prewash” button
• Only for heavily soiled loads (for example
sand, granular dirt). Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave items to soak
for too long.
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start” button to pause the programme.
The light blinks.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start” button again. The new programme
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up. When the combination
of programme and additional option(s) is not possible,
the indication lights switch off automatically. Unsuitable
combinations of options are deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Choose temperature of 30 or 40°C and use with
maximum load.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next to
the “Start” button blinks.
Terminate the “Rinse hold” option:
• Press the “Start” button; the programme will
terminate automatically with the final spin cycle for
the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the “Start” button.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
FAILURE INDICATIONS
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
CONSUMPTION DATA
Power consumption in off-mode 0.11 W / in left-on mode 0.11 W
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
Water tap closed” - no or not sufficient inlet water.
“Service” - failure or malfunction of an electrical
component.
“Clean pump” - waste water is not pumped out.
Spin speed on program flow bar blinks: unbalance
during spinning
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
After about a quarter of an hour, the washing
machine will switch off completely to save energy.
1. 1Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior
of the machine to dry.
  • Page 1 1
  • Page 2 2

Privileg PWT 3626 User guide

Category
Washing machines
Type
User guide

Privileg PWT 3626 is a washing machine with several useful features and various use cases to make your laundry care easier and more flexible. The washing machine comes with a number of pre-defined programs for different types of fabrics and levels of dirt, including Baumwolle (Cotton), Pflegeleicht (Easy-care), Feinwäsche (Delicates), Mischwäsche (Mixed), Schnelle Wäsche 15 min (Quick Wash 15 min), and Wolle/Handwäsche (Wool/Handwash).

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI