Timex Ironman Classic 50 Move User guide

Classic 50 Move+

Instruction Manual

W300 Classic 50 Move+ 3.17.15

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 1

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS ................................................................................. 3

WHAT’S INCLUDED ........................................................................................................................................ 3

WATCH FEATURES AND BUTTON OPERATION ............................................................................................. 3

WEARING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+ ............................................................................... 4

USING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+ ..................................................................................... 4

GETTING STARTED......................................................................................................................................... 4

BATTERY ........................................................................................................................................................ 5

WATER & SHOCK RESISTANCE ...................................................................................................................... 5

ON THE WATCH ............................................................................................................................................. 6

SETTING THE TIME/DATE .......................................................................................................................... 6

ALARMS ..................................................................................................................................................... 7

INDIGLO® NIGHT-LIGHT ............................................................................................................................ 8

NIGHT-MODE® FEATURE ....................................................................................................................... 8

VIEWING THE ACTIVITY TRACKER DATA ................................................................................................... 8

CHRONOGRAPH ........................................................................................................................................ 8

INTERVAL TIMER ....................................................................................................................................... 9

TIMER ...................................................................................................................................................... 11

SETTING THE TIMER ............................................................................................................................ 11

USING THE TIMER ............................................................................................................................... 11

REVIEW MODE ........................................................................................................................................ 11

SYSTEM SETUP ........................................................................................................................................ 12

USER SETUP ............................................................................................................................................. 13

GOAL SETUP ............................................................................................................................................ 13

APPOINTMENTS ...................................................................................................................................... 14

SYNC ........................................................................................................................................................ 15

RESETTING THE WATCH .......................................................................................................................... 15

THE TIMEX CONNECTED APP ...................................................................................................................... 16

INSTALLING THE TIMEX CONNECTED PHONE APP .................................................................................. 16

FIRST TIME PAIRING ................................................................................................................................ 16

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 2

NFC SYNC ............................................................................................................................................. 16

BLUETOOTH SMART SYNC ................................................................................................................... 17

TRANSFERRING DATA FROM YOUR WATCH TO THE APP ....................................................................... 18

TIMEX CONNECTED NAVIGATION PANE ................................................................................................. 19

TIMEX CONNECTED HOME PAGE ............................................................................................................ 19

WORKOUT SUMMARY/REPORTS PAGE .................................................................................................. 20

WORKOUTS LIST PAGE ............................................................................................................................ 21

WORKOUT DETAILS PAGE ....................................................................................................................... 22

WORKOUT DETAILS GRAPHS ................................................................................................................... 23

UPLOADING WORKOUTS TO 3

rd

PARTY SITES ......................................................................................... 24

WATCH CONTROL ................................................................................................................................... 26

CALENDARS ............................................................................................................................................. 28

APP SETTINGS.......................................................................................................................................... 30

ABOUT ..................................................................................................................................................... 31

HELP ........................................................................................................................................................ 31

FCC NOTICE (U.S.) / IC NOTICE (CANADA) .................................................................................................. 32

DECLARATION OF CONFORMITY ............................................................................................................. 33

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 3

Thank you for purchasing the TIMEX IRONMAN Classic 50 Move+.

http://www.timex.com/classic50move

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS

1. This is not a medical device and is not recommended for use by persons with serious heart

conditions. You should always consult your physician before beginning or modifying an exercise

program.

2. Consulting the information on the display while moving is unsafe and distracting, and could

result in accident or collision. Review your metrics only when it is safe to do so. See the

instructions for details.

WHAT’S INCLUDED

1. TIMEX IRONMAN Classic 50 Move+

2. Quick Start Guide

WATCH FEATURES AND BUTTON OPERATION

 Sports watch

 Accelerometer, used for all-day activity tracking

 Goal tracking and alert

 Bluetooth Smart and NFC wireless connection to TIMEX Connected app

 Appointment reminders (after pairing with the TIMEX Connected app)

 2 Time zones

 3 Alarms with 5 minute backup alert

 Optional hourly chime

 100 hour chronograph with 50 lap memory storage

 Interval Timer

 24 hour countdown timer

 INDIGLO night-light with NIGHT-MODE feature

Button functions shown with secondary functions in parentheses. Secondary functions will appear on

the display.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 4

Press Mode button repeatedly to step through modes: Chrono, Interval Timer, Timer, Review, Setup,

Appointment, Alarms, Sync.

Press Mode button to exit current mode and return to Time of Day.

WEARING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+

The TIMEX IRONMAN Classic 50 Move+ can be worn on either wrist, just close the strap buckle in a

comfortable position and you are ready to Move!

USING YOUR TIMEX IRONMAN CLASSIC 50 MOVE+

Not only is your watch a robust chronograph training watch with 50 lap memory storage, your watch

also includes a built in accelerometer which detects your all-day activity. The built in sensor will

automatically be turned on after you manually set the time on your watch (after reset) or after your first

sync with the TIMEX Connected app. The watch will track and display: steps, distance and calorie

expenditure and will store the last 7 days of activity data, however you can enjoy virtually unlimited

storage by transferring your data to the free TIMEX Connected app.

NOTE: Your TIMEX IRONMAN Classic 50 Move+ will automatically reset your activity tracking data at

midnight.

GETTING STARTED

Setup of the TIMEX IRONMAN Classic 50 Move+ can be done on the watch itself or through the use of a

compatible mobile device.

To see if your device is compatible, visit: http://www.timex.com/classic50move

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 5

BATTERY

Your TIMEX IRONMAN Classic 50 Move+ is powered by a user replaceable coin cell battery (CR2025),

however Timex strongly recommends that a retailer or jeweler replace the battery. The battery in

your TIMEX IRONMAN Classic 50 Move+ will last approximately 15 months. Battery life estimates are

based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM

CHILDREN.

WATER & SHOCK RESISTANCE

Your watch is 100 meter (328 ft) water resistant, 160 pounds per square inch absolute.

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.

2. Watch is not a diver watch and should not be used for diving.

3. Rinse watch with fresh water after exposure to salt water.

4. Shock-resistance will be indicated on watch face or case back. Watches are designed to pass ISO

test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 6

ON THE WATCH

Your watch can be setup using two methods:

 TIMEX Connected app (the easiest method) or

 The setup functions directly in the watch

SETTING THE TIME/DATE

Setting the time manually on the watch will clear all appointments previously loaded to the watch.

1. From the Time of Day screen, press and hold the Set/Recall button.

2. Push the Start/Split button to select first or second time zone.

3. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the hour digits

(remembering to pay attention to the AM/PM designation).

4. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the minute

digits.

5. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to reset the second digits

to 00.

6. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the month.

7. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the day.

8. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the year.

9. Push the Mode button, use the Start/Split button to select 12-hour format or 24-hour format.

10. Push the Mode button, use the Start/Split button to select MM-DD or DD-MM date format.

11. Push the Set/Recall button if Done to confirm and exit or Push the Start/Split button to change

to Time 2 settings and repeat steps 3 through 11.

NOTES:

 Don’t forget, you need to re-sync the watch to the TIMEX Connected app to re-load your

appointments.

 When in Time of Day screen, press and hold the Start/Split button to ‘peek’ at the second time

zone.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 7

ALARMS

Your TIMEX IRONMAN Classic 50 Move+ is equipped with three alarms. When alarms are activated, the

Indiglo® night-light and alarm icon will flash and you will get an audible alert; push any button to silence

those alerts. If no button is pressed the alarm will sound for 20 seconds and repeat once after 5

minutes.

To set your alarms:

1. Push the Mode button until ALARMS is on the top of the display.

2. The top banner on your Classic 50 Move+ will quickly change from displaying ALARMS to

displaying ALM 1.

3. Push the Set/Recall button.

4. Push the Start/Split and/or the Stop/Reset buttons to adjust the hour digits.

5. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to adjust the minute

digits.

6. Push the Mode button, use the Start/Split button to select AM or PM.

7. Push the Mode button, use the Start/Split and/or Stop/Reset buttons to select the alarm

frequency: DAILY, WKDAYS, WKENDS, MON, TUE, WED, THU, FRI, SAT, OR SUN.

8. Push the Set/Recall button to confirm and exit.

9. Push the Stop/Reset button to change to the next alarm settings.

10. Repeat steps 3 through 9 to adjust all three alarms in the watch.

11. You will now see an alarm clock icon on the Time of Day screen; this signifies the presence of an

active alarm/alarms.

NOTES:

 The alarms can quickly be deactivated/reactivated by accessing the alarms (ALM 1, ALM 2, ALM

3) and pushing the Stsrt/Split button.

 When in Alarms Mode, push the Stop/Reset button to scroll through all three available alarms.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 8

INDIGLO® NIGHT-LIGHT

Electroluminescent technology used in the INDIGLO night-light illuminates the entire watch face for easy

viewing at night and in low light conditions.

Push the INDIGLO button to illuminate watch display for 3-4 seconds when the watch is not in the

Setting state, or 6-7 seconds otherwise.

NIGHT-MODE® FEATURE

The NIGHT-MODE feature causes any button press to automatically activate the INDIGLO night-light for

3-4 seconds when the watch is not in the Settings state, or 6-7 seconds otherwise. When the NIGHT-

MODE feature is active, you will see a moon icon on the display.

Push and hold the INDIGLO button for 4 seconds to activate or deactivate the NIGHT-MODE feature.

NOTE: NIGHT-MODE will automatically deactivate after 8 hours.

VIEWING THE ACTIVITY TRACKER DATA

1. From the Time of Day screen, push the Stop/Reset button to scroll through the available activity

tracking data (STEPS, # of steps taken, DIST, total distance covered, CALS, number of calories

burned, DATE, Day of week and date).

NOTE: Your TIMEX IRONMAN Classic 50 Move+ will automatically reset the activity data (set all fields to

zero) at midnight each night.

CHRONOGRAPH

Use the Chronograph mode to record a workout. Chronograph mode counts up by hundredths of a

second up to one hour, then by seconds up to 100 hours. The Stopwatch icon will be flashing on the

display during a workout and will be solid when the workout is paused or stopped. Chrono will continue

running even if you exit Chrono mode.

To set the display format, push the Set/Recall button. Push the Start/Split button to change the format

then push the Set/Recall button to exit back to Chrono mode.

1. From the Time of Day screen, push the Mode button until you see CHRONO.

2. Push the Start/Split button to start the workout.

3. To take a split, push the Start/Split button. Lap and split times will be displayed with the lap

number.

4. Repeatedly pushing the Set/Recall button during the workout will display the following data (lap

timer, steps, distance and calorie expenditure) on the top banner.

5. To stop or pause the workout, push the Stop/Reset button.

6. To resume the workout, push the Start/Split button.

7. After completing the workout, push the Stop/Reset button to stop the workout.

8. To save the Chrono workout, push and hold the Set/Recall button for two seconds.

9. To discard the Chrono workout, push and hold the Stop/Reset button for two seconds.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 9

10. To delete the latest stored workout, push and hold the Stop/Reset button for three seconds. To

delete all stored workouts, push and hold the Stop/Reset button for six seconds.

NOTES:

 Upon entering Chrono mode, a message will show on the watch face that prompts you to the

number of laps that can be stored before Chrono memory is filled; if the Chrono memory is full

you will see “MEMORY FULL” displayed. See the Review section of this manual for information

on deleting workouts.

 When splits are taken, times are frozen on the display for 10 seconds. Push the Mode button to

release the display and return to the Chrono display.

 Deleting of stored workouts can only be done in Chrono mode, Review mode is only used for

viewing stored workouts. See step 10 above for instructions.

INTERVAL TIMER

You can set up an interval workout with 2 intervals. Each interval can time up to 23 hours, 59 minutes

and 59 seconds.

You can set up your interval workouts to repeat when a set of intervals is complete. Your TIMEX

IRONMAN Classic 50 Move+ will keep track of the repetitions for you and alert you when it is time to

end one interval and start the next.

Your watch can hold up to 5 interval workouts in the device memory. Interval workouts are stored with

the following information: total steps, total calorie expenditure, total distance covered, total time and

number of repetitions (if Intervals are set to Repeat at End).

1. From the Time of Day screen, push the Mode button until you see INTTMR.

2. Push the Set/Recall button to customize your interval workout.

3. Starting with INT 1, push the Mode button.

4. Push the Start/Split and/or Stop/Reset buttons to adjust the hours digits.

5. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the

minutes digits.

6. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the

seconds digits.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 10

7. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to select Repeat at

End or Stop at End. When appropriate selection is on screen, push Mode button.

 Stop at End should be used when you DON’T want the interval to repeat.

 Repeat at End should be used when you DO want the interval to repeat.

8. If you want your interval to include more than one segment, push the Start/Split button to make

adjustments to INT 2, then push the Mode button.

9. Push the Start/Split and/or Stop/Reset buttons to adjust the hours digit.

10. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the

minutes digits.

11. Push the Mode button, then push the Start/Split and/or Stop/Reset buttons to adjust the

seconds digits.

12. Push the Mode button, then push the Start/Split button to select Repeat at End or Stop at End.

When appropriate selection is on the screen, move to step 13.

 Stop at End should be used when you DON’T want the interval to repeat.

 Repeat at End should be used when you DO want the interval to repeat.

13. Push the Set/Recall button to save your Interval workout settings.

14. Push the Start/Split button to start the Interval workout.

15. During the workout, repeatedly push the Set/Recall button to scroll through the following data

on the top banner: interval number, steps, distance and calories burned.

16. Push the Stop/Reset button to stop the workout.

17. To save the Interval workout, push and hold the Set/Recall button for two seconds.

 If five interval workouts have already been stored in the watch memory, the oldest

stored Interval workout is deleted and the current workout data is stored.

18. To discard the Interval workout, push and hold the Stop/Reset button for two seconds.

19. To delete the latest stored interval workout, push and hold the Stop/Reset button for three

seconds. To delete all stored interval workouts, push and hold the Stop/Reset button for six

seconds.

NOTES:

 Look for an hourglass icon to signify there is an interval workout running. A flashing icon means

the timer is running. A solid icon means the timer is paused.

 Deleting of stored interval workouts can only be done in Interval Timer mode, Review mode is

only used for viewing stored interval workouts. See step 19 above for instructions.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 11

TIMER

Timer mode provides a countdown timer with alert. Timer counts down every second from countdown

time. Your TIMEX IRONMAN Classic 50 Move+ will beep and the night-light will flash when the

countdown timer ends (timer reaches zero), push any button to silence the alert. You are given two

options for your countdown timer: Stop at End (one time countdown timer) and Repeat at End (will

repeat indefinitely).

SETTING THE TIMER

1. Push the Mode button until you see TIMER on the screen.

2. To set the timer, push the Set/Recall button. Use the Start/Split and Stop/Reset buttons to

adjust the hours digit.

3. Push the Mode button, use the Start/Split and Stop/Reset buttons to adjust the minutes digit.

4. Push the Mode button, use the Start/Split and Stop/Reset buttons to adjust the seconds digit.

5. Push the Mode button, use the Start/Split button to select the appropriate action at end of

countdown (Stop at end or Repeat at end).

6. Push the Set/Recall button to save the timer settings.

USING THE TIMER

1. Push the Start/Split button to start the countdown timer.

2. To pause the timer, push the Stop/Reset button.

3. Push the Start/Split button to resume the countdown timer.

4. Push the Stop/Reset button to stop the timer, then push and hold the Stop/Reset button to

cancel the timer function.

NOTE: The countdown timer will continue to run if you exit the mode. Look for an hourglass icon to

signify there is a countdown timer running, flashing icon means the timer is running, solid icon means

the timer is paused.

REVIEW MODE

You can view all saved data for Chrono workouts, Interval workouts and All-day activity tracking. Your

TIMEX IRONMAN Classic 50 Move+ will hold up to 7 days of activity data, 5 days of activity data, 5

interval workouts and up to 50 laps of Chrono workout data. You should plan to upload your data to the

free TIMEX Connected app for unlimited data storage.

All-day activity tracking data available: total daily steps, total daily distance and total daily calories

burned (only available if the sensor is turned on or was previously turned on).

Interval timer workout data available: total workout steps*, Total workout distance*, Total workout

calories burned*, total workout time and number of repetitions if Interval Timer was set to Repeat at

End (*only available if the sensor was on during workout recording).

Chrono workout data available: total workout steps*, total workout distance*, total workout calories

burned*, total workout time, average lap time, best lap time and number of laps taken (*only available

if the sensor was on during workout recording).

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 12

1. From the Time of Day screen, push the Mode button until you see Review on the screen.

2. Push the Start/Split and/or Stop/Reset buttons to cycle through the review options and select

the data you want to review: ACTVTY (Daily Activity), CHRONO (Chrono Workout) and INTTMR

(Interval Workout).

3. When you have selected the metrics you want to review, push the Set/Recall button.

4. If available, the watch will list all days saved in the memory. Push the Start/Split button to scroll

through the available dates.

5. Push the Set/Recall button to access the details of that day’s data or the workout data.

6. If multiple lines of data are available, use the Start/Split and Stop/Reset buttons to view all of

the data.

7. Push the Set/Recall button to exit and view additional saved data or workouts.

NOTES:

 Daily activity and interval workout data will be automatically overwritten; however Chrono

workout data cannot be overwritten. For this reason, the TIMEX Connected app has an optional

feature that erases Chrono workout files from the watch once the Chrono workout has been

transferred to the app. Please see the TIMEX Connected app section of this owner’s manual for

details.

 Calorie expenditure data is not an exact number, but a general estimation. Calorie values less

than 100kcals will be displayed as whole numbers (decimals truncated, not rounded).

SYSTEM SETUP

1. From the Time of Day screen, push the Mode button until you see Setup on the screen.

2. If necessary, push the Start/Split button until you see System Setup on the screen.

3. Push the Set/Recall button to access the System Setup menu.

4. Use the Start/Split button to make your Unit selection: Imperial (in, ft, mi, lbs) and Metric (cm,

m, km, kg). Then push the Mode button to proceed.

5. Use the Start/Split button to make your Sensitivity selection:

 Mid: Default setting, the most versatile setting for all general purpose usage

 Low: Recommended for low intensity walking or mild jogging

 High: Recommended for users with a unique gait motion (use only if other settings

do not provide favorable results)

6. Then push the Mode button to proceed.

7. Use the Start/Split button to make your Sensor selection: On (watch will track steps, distance

and calories burned) or Off. Then push the Mode button to proceed.

8. Use the Start/Split button to make your Chime selection: On (watch will chime every hour) or

Off. Then push the Mode button to proceed.

9. Use the Start/Split button to make your Beep selection: On (watch will beep with every button

press) or Off. Then push the Mode button to proceed.

10. Use the Start/Split button to make your Sync selection: Show (watch will be visible to

compatible BLE sensors) or Hide. Then push the Mode button to proceed.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 13

11. Use the Start/Split button to make your NFC selection: On (allows the watch to communicate

with NFC antennas) or Off.

12. Once all selections have been made, push the Set/Recall button to exit and save settings.

13. Push the Mode button to return to the Time of Day screen or push the Start/Split button to

proceed to the next Setup menu option.

USER SETUP

1. From the Time of Day screen, push the Mode button until you see Setup on the screen.

2. Push the Start/Split button until you see User Setup on the screen.

3. Push the Set/Recall button to access the User Setup menu.

4. Use the Start/Split button to make your Gender selection: Male or Female. Then push the Mode

button to proceed.

5. Use the Start/Split and/or Stop/Reset buttons to adjust the individual digits of your weight,

pressing the Mode button between those digits to advance to the next digit. When done, push

the Mode button to proceed to Height.

6. Repeat step 5 to enter your Height data, then push the Mode button to proceed to Age.

7. Repeat step 5 to enter your Age data, then push the Set/Recall button to exit and save settings.

8. Push the Mode button to return to the Time of Day screen or push the Start/Split button to

proceed to the next Setup menu option.

GOAL SETUP

You have the option to do goal setup through the watch or through the app. The app will track and

manage 3 goals (steps, distance, and calorie burn goals). See TIMEX Connected app instructions for

details on setting up goals. If you prefer, you can setup and manage 1 goal through your TIMEX

IRONMAN Classic 50 Move+. Please keep in mind, the setting applied through the app will always be

the priority.

Your TIMEX IRONMAN Classic 50 Move+ will alert you when you when 50% of your goal is met and when

100% of your goal is met.

1. From the Time of Day screen, push the Mode button until you see Setup on the screen.

2. Push the Start/Split button until you see Goal Setup on the screen.

3. Push the Set/Recall button to access the Goal Setup menu.

4. Use the Start/Split and/or Stop/Reset buttons to select the goal you want to track on the watch.

a. Goal options available: Off, Steps, Distance or Calories

5. Push the Mode button to assign a number for the goal you selected.

a. Goal maximums:

i. Steps: 99,999

ii. Distance: 99.99 km or 62.09 mi

iii. Calories burned: 9,999 kcals

6. Push the Start/Split and/or Stop/Reset buttons to adjust the number, then push the Set/Recall

button to exit and save settings.

7. Push the Mode button to exit Setup and return to the Time of Day screen.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 14

APPOINTMENTS

Your TIMEX IRONMAN Classic 50 Move+ can hold up to 50 appointments. Please see the TIMEX

Connected app instructions for detailed instructions about managing appointments.

Your TIMEX IRONMAN Classic 50 Move+ will alert you when you have an upcoming appointment. Alerts

will be 2 hours, 1 hour, 30 minutes or 15 minutes before the appointment time (based on the reminder

setting tied to the appointment).

After syncing your appointments with your Classic 50 Move+, review the appointments by doing the

following:

1. Push the Mode button until APPT appears on the screen.

2. Push the Start/Split and/or Stop/Reset buttons to scroll through your available appointments.

NOTE: The “End of List” screen signifies the end of the available appointments list. Scrolling down past

that screen will take you to the first appointment in the list.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 15

SYNC

Smartphone Sync allows your TIMEX IRONMAN Classic 50 Move+ to connect to a compatible

Smartphone via Bluetooth Low Energy technology. Access the Sync menu to initiate the Bluetooth Low

Energy connection between your watch and your TIMEX Connected app.

1. From the Time of Day screen, push the Mode button until you see Sync on the screen.

2. Push the Start/Split button to initiate the data transfer process.

a. When the transfer has been completed successfully you will see Sync Ok on the screen.

b. If the transfer fails you will see Sync Fail on the screen.

3. You can push the Stop/Reset button to cancel the sync process at any time.

NOTE: All appointments and alarms will be suspended during the sync process. If you have an active

workout running when the sync is initiated, the workout will be stopped and reset (not saved).

RESETTING THE WATCH

Performing the watch reset sequence resets the watch and clears all user entered data. Please make

sure to transfer any data you wish to save before resetting your Classic 50 Move+.

1. Press and hold the Set/Recall, Mode, Start/Split and Stop/Reset buttons for 4 seconds.

a. The watch will reset fully and will return to the “Out of Box” state.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 16

THE TIMEX CONNECTED APP

INSTALLING THE TIMEX CONNECTED PHONE APP

The TIMEX Connected app requires the following OS:

Android: 4.4.2 or higher, NFC capable device or Bluetooth Smart compatible

iOS: iOS 8.1.2 or higher, Bluetooth Smart compatible

The TIMEX Connected app provides the easiest and most convenient method to setup and configure

your TIMEX IRONMAN Classic 50 Move+.

Download and install the TIMEX Connected app for iOS from the iTunes app store, or for Android, from

the Google Play app store.

FIRST TIME PAIRING

Your TIMEX IRONMAN Classic 50 Move+ is equipped with two antennas, NFC (Near Field

Communication) and Bluetooth Smart (Bluetooth Low Energy). You can use either method to connect

your watch to the TIMEX Connected app.

NFC is the most reliable and easiest way for Android users to connect to the TIMEX Connected app; your

watch needs to be very close to the NFC antenna in your phone to connect.

Bluetooth Smart is another option available for pairing a TIMEX IRONMAN Classic 50 Move+ to a mobile

device. Bluetooth Smart has an operating range of approximately 100 feet (30 meters) and is available

on iOS and Android devices.

To connect your Classic 50 Move+ to your mobile device:

1. Open the TIMEX Connected app on your phone.

2. Accept the Privacy and EULA policies.

3. Select the Classic 50 Move+.

4. Select your preferred Sync mode:

 NFC

 Bluetooth Smart

NFC SYNC

5. Select NFC from the Sync Mode options.

6. Hover your Classic 50 Move+ around the back of your Android device; remember the watch has

to be very close to the NFC antenna to connect.

7. A pairing window will appear and the watch will create an audible tone, do not move the watch

from that location until the status bar on the app fills in (which signifies the connection is

established).

8. In the ‘Synchronize’ pop-up window, select Keep Watch Settings or Keep App Settings.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 17

 Keep Watch Settings should be used if you want to maintain any settings adjusted on

the physical watch face.

 Keep App Settings should be used if you want to maintain any settings adjusted in the

app.

9. If Keep App Settings is selected, you will need to touch the watch to the back plate of your

Android device.

10. On the Initial Setup screen, enter the device registration information (First Name, Last Name,

Email Address and Zip Code). You can also opt-in for exclusive offers and special discounts from

Timex, and then touch the Submit button.

NOTE: By default, the Classic 50 Move+ will give priority to settings pulled from the TIMEX Connected

app.

BLUETOOTH SMART SYNC

5. Touch the Get Started button.

6. On your Classic 50 Move+, push the Mode button until you see Sync on the top of the screen.

 Your watch will start alternating the messages “Sync Phone” and “Press Start”.

7. On the app, touch the Next button.

8. On your Classic 50 Move+, push the Start/Split button.

 Your watch is now searching for your mobile device.

9. On the app, touch the Next button.

10. The TIMEX Connected app will now attempt to bring up a Bluetooth pairing screen.

 If the Bluetooth feature in your device is currently off, the TIMEX Connected app will

turn it on for you (with your permission, of course). Then touch the Sync icon to bring

up the Watch Selector screen.

 If the Bluetooth feature in your device is currently on, the TIMEX Connected app will

bring up the Watch Selector screen.

11. On the Watch Selector screen, touch the appropriate Classic 50 Move+ or touch the I Don’t See

My Watch button to re-scan for available watches.

12. You will see SYNC OK on your watch, which means Pairing Complete.

13. In the app, enter the device registration information (First Name, Last Name, Email Address and

Zip Code). You can also opt-in for exclusive offers and special discounts from Timex, and then

touch the Submit button.

NOTE: Bluetooth Smart is the only connection method available for iOS users. Not all compatible

Android phones are equipped with a NFC antenna; in those instances you must use the Bluetooth Smart

connection option.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 18

TRANSFERRING DATA FROM YOUR WATCH TO THE APP

Your TIMEX IRONMAN Classic 50 Move+ offers a discrete connection to the TIMEX Connected app. This

means your watch must be manually synced with the app each time you want to transfer data between

the app and the watch.

To transfer data using Bluetooth Smart:

1. From the Home Page, tap the watch icon in the upper right-hand corner.

2. On the watch, push the Mode button until you see “SYNC PHONE/PRESS START” on the screen.

3. Push the Start/Split button on the watch and then tap the Sync button on the app.

4. In the app pop-up window, select Keep Watch Settings or Keep App Settings.

 Keep Watch Settings should be used if you want to maintain any settings adjusted on

the physical watch face.

 Keep App Settings should be used if you want to maintain any settings adjusted in the

app.

5. “SYNC OK” will be displayed on the watch, “Sync Complete” will be displayed on the app and

your data sync was successful.

To transfer data using NFC:

1. Hover your Classic 50 Move+ around the back of your Android device; remember the watch has

to be very close to the NFC antenna to connect.

 If the TIMEX Connected app is not open, the first touch of the watch to the mobile

device will open the app.

2. A pairing window will appear and the watch will create an audible tone, do not move the watch

from that location until the status bar on the app fills in (which signifies the connection is

established).

3. In the ‘Synchronize’ pop-up window, select Keep Watch Settings or Keep App Settings.

 Keep Watch Settings should be used if you want to maintain any settings adjusted on

the physical watch face.

 Keep App Settings should be used if you want to maintain any settings adjusted in the

app.

4. If Keep App Settings is selected, you will need to touch the watch to the back plate of your

Android device.

5. The Home page of the app will be displayed and the Last Sync data should be updated to the

current time and date.

TIMEX

®

IRONMAN

®

Classic 50 Move+ Owner’s Manual Page 19

TIMEX CONNECTED NAVIGATION PANE

TIMEX CONNECTED HOME PAGE

NOTE: Steps Taken, Calories Burned and Total Distance data is displayed above a color coded bar. This

bar represents the goals set for each activity data metric.

 Color Coding Key:

 Green: Great job, goal achieved

 Orange: Well on your way to achieving the goal

 Red: Get moving, you have a long way to go

Access Navigation Pane from any page

Home

Workouts

Watch Control

Calendar

App Settings

About

Help

Last Sync with Watch

Steps Taken Today

Calories Burned Today

Total Distance Traveled

Today

App Settings

Workouts

Workout Summary/Reports

Watch Control

Bluetooth Smart Sync

Calendars

Page is loading ...

Timex Ironman Classic 50 Move User guide

This manual is also suitable for

Timex Ironman Classic 50 Move User guide

in other languages

Related papers

Other documents