Victor vct12103 User manual

Page is loading ...

PREFACE

Congratulations on your choice of a Victor electronic

calculator. Careful design, quality materials, painstaking

workmanship, and advanced research and productions

facilities have given you a calculator that, with proper care,

will provide years of trouble-free service. To assure future

optimum performance, ask your Victor representative about

low cost protection offered by Victor's Extended Guarantee

Protection Program.

This operating manual describes the features and operation

of the Victor 1210-3A and 1212-3A. Where applicable,

differences in these two models are noted. This calculator

also features the four basic arithmetic operations, grand

total, sigma, percentage, percent of change, change sign,

item count, non-date add functions, programmable tax rate,

back space, cost, sell, margin, and four key memory

functions. The Victor 1210-3A and 1212-3A also have

calendar and clock features.

NEW ANITMICROBIAL PROTECTION

Your Victor calculator has been engineered with an

Antimicrobial agent that protects the calculator against the

growth of microbes and bacteria.

Did you know that viruses can live for up to 72 hours on

common surfaces, such as desks, phones, and calculators?

How do you protect your calculator? Surprisingly, with silver.

This precious metal is a natural germ-fighter, using its ions to

attack microbes. This silver is so safe and effective that it

has been EPA-approved for use in a wide range of

applications. One of those applications is within your own

Victor Antimicrobial calculators. Now you can reduce

microbes on your desktop environment while maximizing

your calculating power

TABLE OF CONTENTS

Operations and General Maintenance

Replacing the ink roller

Loading Paper

Display Symbols

Keyboard Diagrams

Keyboard Layout

Slide Switch Features

Key Features

Date and Time Functions

Application Examples

Setting the Date and Time

Warranty

SPECIFICATION

Display

Printing Speed

Printing Paper

Power Sources

Ambient Temperature

Power Consumption

Dimension

Ink Roller

Printing Color

Weight

: 10 digits, large LCD display

: 2.1 lines/second.

: Width 58mm (2 ¼ inch), MAX

: AC 110-120,220-230 or 240V,50/60Hz,

with an AC adaptor 6V DC, 300mA or

400mA.

:Or DC-Four AA size manganese dry

batteries (UM-3)

: 0° ~ 40°C (32° ~ 104°F)

: 1.6W

: 260mm(L) × 198mm(W) × 65mm(H)

: IR-40T

: 2-color (minus and negative in red)

: 660g

PREPARATION

A. Power source

This unit receives its operating power with an AC adaptor 6V DC,

300mA or 4 AA size manganese dry batteries (UM-3).

When Power is in ON position, pressing [D/#] key will only print

the digits displayed in the front display panel.

B. Loading Paper

Place paper holder into position (Fig.I).

Install the paper roll on the holders.

Insert the paper end into printer slot (Fig.II).

Press [ ] key to feed the paper to an adequate length

Fig. I Fig. II

If the printing becomes faint, the ink roller may need to be replaced.

C. Replacing the lnk Rller

1) Turn the power off.

2) Open the printer cover(Fig.III)

3) Remove the old ink roller by pulling it up (Fig.IV).

4) Insert the new ink roller IR40T in the compartment and

gently press it down until it snaps into place.

Fig. III Fig. IV

CAUTION: Turn the power off before replacing ink roller.

KEY IDENTIFICATION

OFF NP P IP

(OFF) Display OFF, whiles time/date memory

will remain.

(NP P IP) Switch to choose Printer OFF, Printer ON

or Printer item count mode.

GT TAX SET

( ∑ ) The calculator automatically adds the

result of multiplication/division to the total

register-no need to press + key each

time. Obtain the multiplication/division

result by pressing = key.

(GT) Grand Total Memory selectable switch.

(TAX SET) Selects set mode for tax rate.

∑

▲5/4▼

(▲) An answer is rounded up.

(5/4) An answer is rounded off.

(▼) An answer is rounded down.

A 0 2 3 4 F

Decimal set

(A) accoutant,Fixed (0,2,3,4),(F)floating

[0]~ [9] [00] :Numeral keys

[.] :Decimal point key

[+] :Add key

[-] :Subtract key

[×] :Multiplication key

[÷] :Division key

[=] :Equal key

[%±] :Percent key

[MS] :Memory subtotal recall key

[MT] :Memory total clear key

[M+] :Memory plus key

[M-] :Memory minus key

[D/#] :Date/Number key print key

[ ] :Paper feed key

[ /S] :Subtotal key

[C/CE] :All clear/Clear entry

[ ] :Back space key

[ ] :Inverts sign of the displayed number at

key entry

[TAX+] or [TAX-] :TAX+ Calculates the tax amount, using

The stored rate, and adds it to the

Original price before tax

:TAX- Calculates the amount of tax

to be deducted (using the stored tax

Rate) and subtracts it from the

displayed value to find the pre-tax

sales amount

:Prints TAX / Included TAX

(TAX=3)

A TAX+ = A(3/100)

= A+(A(3/100))

:Prints TAX / Included TAX

(TAX=3)

A TAX- = A - A (1+3/100)

= A / (1+3/100)

[∆%] :Prints difference (Computes the %

Of change between two values)

A ∆% B = B - A

= (B - A) / A

A ∆% B +/- = - (B + A)

= - (B + A) / A

[*/T] :Total key

[COST] [MARGIN] [SELL] :Used for calculating the cost,

selling price and profit margin

amount. Enter the value of any 2

items to obtain the balance

value item. (e.g. enter the value

of the cost and the selling price

to obtain the profit margin.)

[GT] :In Grand total mode, adds the

total register to the

GT register by the (*/T) key

[TIME] :Displays date or time

[SET] :Used to set the date and time in

calendar & clock mode

[AM/PM] :Used to switch between AM or

PM at clock mode time setting

[12/24] :Used to switch between 12 or 24

hour at clock mode time setting

[FORMAT] :Used to select date format

between “YYYY/MM/DD”,

“DD/MM/YYYY” or

“MM/DD/YYYY” at calendar mode

DISPLAY SYMBOL

MEMORY : A number has been stored in

memory

ERROR : Error or overflow of capacity

– : The display value is negative

GT :A number has been stored in

Grand Total

TAX+ , TAX-, TAX% :Performance of tax calculation

SELL,COST,MARGIN% :Performance of cost,sell,and

Profit Margin calculation

DATE AND TIME FUNCTION

Set Date and Time

1) Press TIME/DATE and then SET. (The first digit of the month

will flash.)

2) Enter the month MM using the number keys. (The first digit of

the date will flash.)

3) Enter the date DD using the number keys. (The first digit of

the year will flash.)

4) Enter the year YYYY using the number keys. (The first digit of

the month will flash.)

5) Press SET to confirm the date.

6) Press TIME/DATE and then SET. Enter the time using the

number keys and press 12/24 to switch between 12-hour or

24-hour clock.

7) Press AM/PM to toggle morning or afternoon and press SET

To confirm the time.

The TIME/DATE key is used to display the

Time or Date.

Depressing the TIME/DATE key once displays

the dateMM-DD-YYYY.

Depressing the TIME/DATE key a second time

displays the time , HH-MM-SS.

When displaying the Date or Time the = key

becomes a key to enter or exit the date or

time set mode.

When displaying the Time the ÷ key becomes

a key to toggle between the 12(AM/PM) or 24

hour clock mode.

When displaying the Time in the set mode the

× key becomes a key to toggle between AM

and PM when in the 12 hour time mode.

DATE FORMAT: While displaying the date, depressing the %±

key allows changingthe date format mode from MM-DD-YYYY to

DD-MM-YYYY or YYYY-MM-DD. The default date format is

MM-DD-YYYY.

How to set date:

Oct.29,2001

0 3 4 5

(Hold for 3 seconds)

How to set time:

a) 3:45AM

b) 3:45PM

c) 15:45

MM-DD-YYYY

“M”M-DD-YYYY

10-“D”D-YYYY

10-29-“2”YYY

“1”0-29-2001

10-29-2001

HH-MM-SS

“H”H-MM

“0”3-45

03-45-00

“0”3-45

03-45-00

15-45-00

C/CE

×

AM/PM

÷÷

12/24

SET

=

SET

=

SET

=

SET

=

SET

=

AM

PM

Problem

Operation

Read- out

10

29

2001

(Hold for 3 seconds)

SET

=

REPLACING THE BACK-UP BATTERY:

1) Using a screwdriver remove the three screws on the back cover

of the calculator.

2) To separate the front and back cover halves, carefully insert and

twist a flat-blade screwdriver between them.

3) Use a flat-blade screwdriver to gently pry out the battery.

4) Position the new battery so the positive (+) side is up. Slide one

edge of the battery under the tab on the battery holder, then

press the battery into place.

5) Snap the cover halves back together. Then reinsert and tighten

the screws.

NOTE: Memory backup battery retains the tax rate, calendar and

clock setting,

when the power is off or even when the AC cord is

disconnected.

Battery: 1 Lithium battery (Type: CR 2032)

Battery life: Backup time 1000 hours

RESETRESET

RESET:

Electromagnetic interference or electrostatic discharge may cause

the display to malfunction or the contents of the memory to be

lost or altered. Should this occur, use the tip of a ball point pen

(or similar sharp object) to press the [RESET] button on the bottom

of the calculator. After resetting, be sure to set the tax rate, time

and date again.

Page is loading ...

C. Percent

Prozenttaste

Porcentaje

D. Memory calculation

Rechnen mit Speicher

Cálculo de Memoria

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

(8732x3)-(42730÷32)

=24860.6875

8’732.

MEMORY 26’196.

MEMORY 42’730.

MEMORY 1’335.3125

MEMORY 24’860.6875

24’860.6875

8,732. ×

3. =

26,196. M+

42,730. ÷

32. =

1,335.3125 M-

24,860.6875 M

24,860.6875 M*

-

8732 x

3 M+

42730 ÷

32 M-

MS

MT

E. Correcting mistaken entry

Korrektur fehlerhafter Eingabe

Corrección Entrada Errores

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

123+455=578 123.

0.

578.

123. +

455. +

578. *

123 +

456 C/CE

455 +

*/T

%±

F. Decimal select

Dezimalstellenrechnung

Selección de Decimales

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

[ 5/4 ] =

[A 0 2 3 4 F] = F

1.4231x3=?

[A 0 2 3 4 F] = 4

123x5=615

123+5=128

[ 5/4 ] = 5/4

[A 0 2 3 4 F] = 2

[A 0 2 3 4 F] = 0

[OFF/NP/P/IP] = IP

[A 0 2 3 4 F] = A

3.13+0.05+4.56+6.00

=13.74

1.4231

4.2693

123.

615.0000

0.

123.0000

128.0000

-98.1010

1.4231

4.27

1.4231

4.

0.

3.13

3.18

7.74

13.74

1.4231 x

3. =

4.2693 +

123. ×

5. =

615.0000 +

0. C

123.0000 +

5.0000 +

128.0000 *

#98.10.10.......

1.4231 x

3. =

4.27 +

1.4231 x

3. =

4. +

0. C

3.13 +

0.05 +

4.56 +

6.00 +

004................

13.74 *

....

1.4231 x

3 =

123 x

5 =

C/CE

123 +

5 +

*/T

98.10.10 +/- D/#

1.4231 x

3 =

1.4231 x

3 =

C/CE

313 +

5 +

456 +

600 +

*/T

Print date 98/ 10/ 10

G. Rounding calculation

Rechnen mit Rundung

Cálculo de redondeo

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

[OFF/NP/P/IP] = P

[ 5/4 ] =

[A 0 2 3 4 F] = F

3÷7x2=?

1).

[A 0 2 3 4 F] = 3

3÷7x2=?

2).

[A 0 2 3 4 F] = 2

[ 5/4 ] = 5/4

3÷7x2=?

3).

[ 5/4 ] =

3÷7x2=?

3.

0.42857142857

0.85714285714

3.

0.42857142857

0.858

3.

0.42857142857

0.86

3.

0.42857142857

0.85

3. ÷

7. x

2. =

0.85714285714 +

3. ÷

7. x

2. =

0.858 +

3. ÷

7. x

2. =

0.86 +

3. ÷

7. x

2. =

0.85 +

3 ÷

7 x

2 =

3 ÷

7 x

2 =

3 ÷

7 x

2 =

3 ÷

7 x

2 =

H. Application calculation

Kettenrechnung

Aplicación del cálculo

I. Business sales calculation

Gesch-ftliche Verkaufskalkulation

Cálculo de Ventas Comerciales

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

1,500. *

30. M%

1,050. CC

2,000. CC

20. M%

2,500. *

1,500. CC

2,000. *

25. M%

+

1’500.

1’050.

2’000.

2’500.

1’500.

25.

1500

30

2000

20

1500

2000

Calculating Cost

Selling Price: $1,500

Profit Margin: 30%

Cost =? ($1,050)

Calculating Selling Price

Cost: $2,000

Profit Margin: 20%

Selling Price=? (2,500)

Calculating Profit Margin

Cost: $1,500

Selling Price: $2,000

Profit Margin=? (25%)

SELL

COST

MARGIN%

SELL

COST

MARGIN

COST

SELL

C/ CE

C

0.

Subtotal C

Sous- total C

J. Adds the total register to the GT register by the (*/T) key

Addiere das Gesamtergebnis zum GT Ergebnis mit der (*/T) Taste.

Adicíon del total al registro de GT con la tecla (*/T)

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

Clear GT Memory

Löschen GT Speicher

Borrar Memoria GT

[A 0 2 3 4 F] = F

[OFF/NP/P/IP] = P

[Σ/GT/TAX SET] =GT

A = 2 + 3 = 5

+)B = -3 - 4 - 5 = -12

GT1 = A + B = -7

GT2 = A + B = -7

GT3 = A + B = 0

0.

2.

5.

-3.

-7.

-12.

-7.

0.

0. C

0. G

0. G*

2. +

3. +

5. *+

3. -

4. -

5. -

-12. *+

-7. G

-7. G*

0. G*

+

2

3

4

5

C/CE

GT

+

*/T

-

*/T

GT

K. % key operation example

% Delta Prozent Rechnung

Ejemplo de operación de la tecla %

2.

50.

2.

-3.

-250.

[A 0 2 3 4 F] = F

2 % 3 = ?

2 % 3 +/- = ?

2

3

2

3

%

=

%

+/-

=

2.

3. =

1. *

50. %

2.

-3. =

-5. *

-250. %

M

+

M

+

Example

Beispiel

Ejemplo

Operation

Bedienung

Ingreso

Display

Pantella

Printing-out

Druck

Impresion

Page is loading ...

WARRANT

GARANTIE

LA GARANTÍA

Your new VICTOR electronic calculator is guaranteed to the Original purchaser for two

years for all parts and labor, providing repair work is performed at an authorized VICTOR

Regional Service Center and the unit are sent by prepaid mail. For Service Centers

outside the USA please consult your local office supply Dealer or Victor’s Web Site.

Warranty repair requires a copy of the original purchase invoice or receipt to be packed

with the machine.

Any warranty, statutory or otherwise, does not include service and or replacement or

repair of parts when damage or defect is a result of accident,abuse,or the elements.

Victor Technology

780 West Belden Avene

Addison, IL 60101 USA

(630)268-8400 (Phone)

(630)268-8450 (Fax)

http://www.victortech.com

Votre nouvelle calculatrice électronique VICTOR est garantie au premier acheteur

pendant une période de deux ans pour toutes les pièces et la main d’oeuvre,a condition

que les réparations soient effectuées dans un Centre de service régional VICTOR

autorisé et que I’appareil soit envoyé par courrier affranchi.Pour les Centres de service

situés a I’extérieur des États-Unis, veuillez consulter votre distributeur de fournitures de

bureau local ou le site Web de Victor . Pour qu’une réparation soit couverte par la

garantie, il faut joindre la facture ou le reçu d’achat avec I’appareil.

Toute garantie,légale ou autre, n’inclut pas I’entretien et/ou le remplacement ou la

réparation de pièces lorsque le dommage ou la défectuosité est dbi a un accident, a un

mauvais usage ou aux éléments.

Su nueva calculadora electronica de VICTOR se garantiza a el comparador original

durante dos años para todas las partes y labora, mientras proporcionando el trabajo de

la reparación ha realizado en un Centro Regioal de Reparaciones autorizado por VICTOR

y la unidad se envía por el correo pagado por adelantado.Para los Centros de Servicio

fuera del EE.UU.por favor consultan su suministro de la oficina local distribuidor o Víctor

Web Site. La reparación de la garantía requiere una copia de la factura de la compra

original o recibo ser condensado con la máquina.

Cualquier garantía, estautario o por otra parte, no incluya el servicio y o reemplazo o

reparación de partes cuando daño o defecto es un resultado de accidente, abuse, o los

elementos.

Victor Technology

780 West Belden Avene

Addison, IL 60101 USA

(630)268-8400 (Téléphone)

(630)268-8450 (Fax)

http://www.victortech.com

Victor Technology

780 West Belden Avene

Addison, IL 60101 USA

(630)268-8400 (el teléfono)

(630)268-8450 (el facsímil)

http://www.victortech.com

Corporate Office

and

National Service Center

Victor Technology

780 W.Belden Avenue

Addison,IL 60101

Phone(630 268 8400)

Fax (630 268 8450)

Http://www.victortech.com

MADE IN CHINA

IM-1 01TS2#3VI1

Victor vct12103 User manual

This manual is also suitable for

Victor vct12103 User manual

in other languages

Related papers

Other documents