ViewSonic VSD242-BKA-US0 User guide

Brand: ViewSonic

Model: VSD242-BKA-US0

Category: Touch screen monitors

Type: User guide

This manual is also suitable for

VSD242-BKA-US0-S

ViewSonic VSD242-BKA-US0 is a smart display with a 24-inch touchscreen that runs on the Android platform, offering a wide range of capabilities for entertainment, productivity, and connectivity. With built-in Wi-Fi and Bluetooth, you can easily access the internet, stream media, and connect with other devices. You can also expand the functionality of your smart display by downloading apps from the Google Play Store.

VSD242

Smart Display

User Guide

Model No. VS16340

Thank you for choosing ViewSonic

With over 25 years as a world leading provider of visual solutions, ViewSonic

is dedicated to exceeding the world’s expectations for technological evolution,

innovation, and simplicity. At ViewSonic, we believe that our products have the

potential to make a positive impact in the world, and we are condent that the

ViewSonic product you have chosen will serve you well.

Once again, thank you for choosing ViewSonic !

Compliance Information

Please read before proceeding

• Use only the batteries and power adapter provided by the manufacturer. The use of

unauthorized accessories may void your warranty.

• Do not store your device in temperatures higher than 50°C (122°F).

• The operating temperature for this device is from 0°C (32°F) to 35°C (95°F).

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage

Directive 2014/35/EU.

European Union Regulatory Conformance

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council

Recommendation of 12 July 1999 on the limitation of exposure of the general public to

electromagnetic elds (0-300 GHz). This equipment meets the following conformance

standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.

We, hereby, declare that this Wi-Fi & Bluetooth radio is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and

Electronic Equipment Directive 2012/19/EU (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted

municipal waste, but use the return and collection systems according to local law.

If the batteries, accumulators and button cells included with this equipment,

display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a

heavy metal content of more than 0.0005% Mercury, or more than 0.002%

Cadmium, or more than 0.004% Lead.

iiiii

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/

EU of the European Parliament and the Council on restriction of the use of certain

hazardous substances in electrical and electronic equipment (RoHS2 Directive) and

is deemed to comply with the maximum concentration values issued by the European

Technical Adaptation Committee (TAC) as shown below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers

(PBDE)

0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III of the

RoHS2 Directives as noted below:

Examples of exempted components are:

1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps

(CCFL and EEFL) for special purposes not exceeding (per lamp):

(1) Short length (≦500 mm): maximum 3.5 mg per lamp.

(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.

(3) Long length (＞1,500 mm): maximum 13 mg per lamp.

2. Lead in glass of cathode ray tubes.

3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by

weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other than

dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic

matrix compound.

iiiii

Important Safety Instructions

1. DO NOT place objects on top of the device, as objects may scratch the screen.

2. DO NOT expose the device to dirty or dusty environments.

3. DO NOT place the device on an uneven or unstable surface.

4. DO NOT insert any foreign objects into the device.

5. DO NOT expose the device to strong magnetic or electrical eld.

6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep

it away from heat sources.

7. DO NOT use the device in the rain.

8. Please check with your Local Authority or retailer for proper disposal of electronic

products.

9. The device and the adapter may produce some heat during normal operation or

charging. To prevent discomfort or injury from heat exposure, DO NOT leave the

device on your lap.

10. POWER INPUT RATING: Refer to the rating label on the device and be sure that

the power adapter complies with the rating. Only use accessories specied by the

manufacturer.

11. DO NOT use a pen or any sharp object to tap the screen.

12. Clean the screen with a soft cloth. If needed, dampen the cloth slightly before

cleaning. Never use abrasives or cleaning solutions.

13. Always power off the device to install or remove external devices that do not support

hot-plug.

14. Disconnect the device from an electrical outlet and power off before cleaning the

device.

15. DO NOT disassemble the device. Only a certied service technician should perform

repair.

16. The device has apertures to disperse heat. DO NOT block the device ventilation, the

device may become hot and malfunction as a result.

17. Users have to use the connection to USB interfaces with USB 2.0 version or higher.

18. PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the equipment

and shall be easily accessible.

viv

Android, Google, Google Play, the Google Play logo and other marks are trademarks of

Google Inc.

This product has an Android

platform based on Linux, which can be expanded by a

variety of JME-based application SW.

All products used in this device and trademarks mentioned herein are trademarks or

registered trademarks of their respective owners.

Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity

Alliance.

microSD™ is a trademark of SD Card Association.

Java, JME and all other Java-based marks are trademarks or registered trademarks of

Sun Microsystems, Inc. in the United States and other countries.

The actual included applications (apps) may differ from the illustrated screen shots.

VESA

is a registered trademark of the Video Electronics Standards Association. DPMS

and DDC are trademarks of VESA

ENERGY STAR

is a registered trademark of the U.S. Environmental Protection Agency

(EPA).

As an ENERGY STAR

partner, ViewSonic Corporation has determined that this product

meets the ENERGY STAR

guidelines for energy efciency.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors

or omissions contained herein; nor for incidental or consequential damages resulting

from furnishing this material, or the performance or use of this product.In the interest of

continuing product improvement, ViewSonic Corporation reserves the right to change

product specications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for

any purpose without prior written permission from ViewSonic Corporation.

Intellectual Property Right Information

Right to all technologies and products that comprise this device are the property of their

respective owners:

This product has an Android platform based on Linux, which can be expanded by a variety

of Java-Script-based application SW.

Java, JME and all other Java-based marks are trademarks or registered trademarks of

Sun Microsystems, Inc. in the United States and other countries.microSD is a trademark

of SD Card Association.

viv

Product Registration

To meet your future needs, and to receive any additional product information as it

becomes available, please register your product on the Internet at: www.viewsonic.com.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

VSD242

ViewSonic Smart Display

VS16340

VSD242_UG_ENG Rev. 1A 02-03-16

_______________________________

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank

you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn

more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Table of Contents

1vi

1 VSD242 Smart Display Features

2 Set Up Your VSD242 Smart Display

2.1 Connection ......................................................................... 2

2.2 Get Your Smart Display Ready for Use .............................. 2

2.3 Power on Your Device ........................................................ 3

2.4 Power Off Your Device ....................................................... 4

3 About Your VSD242 Smart Display

3.1 Touch Screen ..................................................................... 5

3.2 Applications, Widgets and Shortcuts .................................. 6

3.3 Home Screen ..................................................................... 6

3.4 Navigation buttons ............................................................. 8

3.5 Status Bar ........................................................................... 9

3.5.1 Managing Status Menu .......................................... 9

3.6 Customizing Your Home Screen ...................................... 10

3.6.1 Add an Item (Shortcut) ........................................ 10

3.6.2 Move an Item ..................................................... 10

3.6.3 Delete an Item .................................................... 10

3.6.4 Change the Wallpaper ........................................ 10

3.7 Navigating the Applications ...............................................11

3.7.1 Apps screen .......................................................... 11

3.7.2 Application Shortcuts ........................................... 12

3.7.3 Recent Applications ............................................. 12

3.7.4 Screen Lock Wallpaper ........................................ 13

3.8 Connecting to HDMI-compliant Devices via HDMI Input .. 14

4 OSD Menu

4.1 Adjustment Bars ............................................................... 15

4.2 Functions items ................................................................ 16

4.3 OSD Notice....................................................................... 17

4.4 OSD and Hot keys setting ................................................ 17

5 Troubleshooting

5.1 Touch Screen Problems ................................................... 18

5.2 Other Problems ................................................................ 18

6 Appendix

Specication ............................................................................. 19

Table of Contents

1vi

VSD242 is a Smart Display with 23.6-inch quad-core display running on

Android 5.1 (Lollipop) Comes with 1920x1080p HD resolution, allow you to

work with HDMI, full-sized USB connectivity as well.

1 VSD242 Smart Display Features

This section introduces you to the features of your Smart Display.

NOTE

• The features or applications described in this User’s manual may vary depended on the

device model purchased.

Front View

No. Components Descriptions

Front-Panel Camera

- Used for taking a front picture just the same as a

self-portrait.

- Used for making video calls with supportive web

applications.

Microphone Used for receiving audio or audio input.

Table of Contents

No. Components Descriptions

Touch screen - Touch the screen to control the on-screen

congurations including menu items,applications,

buttons,keyboard and so on.

Power button Press to power on / lock the smart display.

- Press about 0.5 seconds to power on the power.

- Lock the smart display when the display is on.

- Recall the unlock display when the smart display

is locked.

- When the display is on, press this button and

hold for about 3 seconds to shut down the smart

display (under Android mode).

LED indicator - LED in blue when power on.

- LED turns into amber when smart display be

locked.

OSD Menu / Exit Press this button to launch the OSD conguration

menu and press again to exit.

Arrow Button

(Down / Left)

Use the arrow buttons (Up / Right and Down / Left)

to move through OSD menus. You can highlight a

menu item by pressing the arrow buttons. You can

also use the arrow buttons to adjust the values to

each item of OSD menu.

Arrow Button

(Up / Right)

Input Signal Switch

OSD Menu Select

Press to switch Input signal (Android/HDMI)

Select function in OSD menu.

VSD242 Smart Display Features

32 32

Back View

LEFT SIDE RIGHT SIDE

LEFT SIDE

No. Components Descriptions

RJ45 Connector Connect to a RJ45 cable for network connection.

HDMI OUT

Connect to digital high quality device for video and

audio congurations (e.g. PC Monitor, BD Player

OHP )

HDMI IN

Headset Jack Connect to earphone or headset.

Microphone IN Plug a compatible microphone into the device.

SD Card Slot

Input SD card to extend storage capacity.

(Up to 32 GB)

Mini USB Port (OTG)

Connect to windows computer for data transferring.

(Need MTP driver)

DC in Port Connect to power adaptor.

RIGHT SIDE

USB type-A x4 (2.0)

Used for keyboard, mouse, ash

disk (supports

FAT32 format only) or printer connections.

USB type-B

External display mode for USB upstream Webcam

and Touch-screen control functionality.

Set Up Your VSD242 Smart Display

2 Set Up Your VSD242 Smart Display

2.1 Connection

External

Computer

Earphone

Microphone

Outlet

Notebook

DVD Player

USB

HDMI OUT

LAN

Microphone

Power

Wi-Fi Devices

Keyboard

Printer

Mouse

USB Storage

Headset

HDMI IN

USB Type-A

USB Type-B

SD Card

PC Monitor

Phone U Disk

Computer

2.2 Get Your Smart Display Ready for Use

Insert the SD card

Insert a SD card if desired and / or

available on the back of your smart

display.

Set Up Your VSD242 Smart Display

Connect the Power Cord

Connect the included power cord to

the power jack.

Connect the other end of the power cord to a suitable power outlet.

2.3 Power on Your Device

Press the power button gently to power on your device

Slide the lock icon to unlock the screen

(if the lock screen function with slide is enabled)

After connecting the power cord, you can press the power button about

0.5 seconds to power on your device.

Once powered-up, the LED indicator will show solid Blue.

The unlock display will appear after a short boot-up period. (If the lock

screen function is enabled).

Set Up Your VSD242 Smart Display

Touch and slide the lock icon to unlock the screen if necessary.

The device is ready for use when the Home screen is displayed.

2.4 Power Off Your Device

Press and hold the power button for about 3 seconds.

When the power off menu appears, touch OK.

About Your VSD242 Smart Display

3 About Your VSD242 Smart Display

3.1 Touch Screen

The main way to control the device is using your nger to touch the sensitive

surface of the screen directly. You can manipulate icons, buttons, menu

items, on-screen keyboard and other items on the touch screen with below

methods:

Methods Descriptions

Touch Simply touch the items with you nger.

- Act on items on the screen including application and settings

icons.

- Type letters and symbols using the on-screen keyboard.

- Press the on-screen buttons.

Touch and

Hold

Touch and hold an item on the screen by touching it without

lifting your nger until an action occurs.

Drag Touch and hold an item then move the item with your nger until

reaching the target position.

- Move an item on the screen.

- Scroll through Home screens, web pages, lists, entries, photo

thumbnails, contacts and so on.

Swipe or Slide Quickly move your nger across the surface of the screen

without pausing when you rst touch it.

Zoom Out Move two ngers close together on the screen to reduce the

view of an image or web page.

Zoom In Move two ngers apart on the screen to enlarge the view of an

image or web page.

NOTE

• You can connect the dots three to zoom the entire display frequency, also with two

fingers to rotate and zoom the display for ex. Google Maps

, as well as voice output

designed specifically for blind users and gesture mode navigation features.

About Your VSD242 Smart Display

3.2 Applications, Widgets and Shortcuts

The soft buttons or icons offer a variety of functions and shortcuts. On the

Home screen, it is your starting point to access all the features on your

device. It displays application icons, widgets, shortcuts and so on.

Applications: Software allows you to perform a specic task. Power on your

device, it is preloaded with a variety of applications already. You can also

download additional applications from the Google Play

Store.

Widgets: Widgets are applications that you can use directly on the Home

screen. Example: Analog clock, Bookmark, Picture frame, the Google

search bar and so on.

Shortcuts: A link that you can create on your Home screen to provide

quicker access to applications you have installed.

3.3 Home Screen

Once you power on your device, and unlock your screen, the central Home

screen will display rstly. You can also touch the Home button to go to

Home screen. On the Home screen, it allows you to access all the features

installed in your device.

The Home screen is composed of ve screen panels. You can slide your

nger to left or right across the central Home screen to view more widgets,

shortcuts, and other items located on each screen panel. You can also add

shortcuts, widgets or change the desktop wallpaper on each screen panel.

About Your VSD242 Smart Display

3 4 5

1 2

No. Items Descriptions

Google Search

Use the Google Search application to search

the web faster and easier from Google.

Navigation

Area

Flick and drag the screen horizontally until

the desired Home screen is displayed.

Back Return to the previous screen or option.

Home

This button will indicate you to go back to

central Home screen at any time.

Recent

Applications

Touch this button to show you a list of

images about the applications you have

accessed recently. You can touch the listed

image to open the applications.

Screehshot

Tap this button to capture an image of your

screen.

Apps

Touch the Apps button to launch all of the

applications installed on your device.

Wi-

The Wi- icon will appear on the upper right

corner of the screen when you enable the

Wi- function.

3:11

Time Display the current time.

Voice Input

Use voice input as an alternative to text

entry via keyboard.

About Your VSD242 Smart Display

1110

No. Items Descriptions

Shortcuts

You can add an application shortcut to the

Home screen and move it freely by touching

and holding the specied icon. This icon

allows you to open a shortcut item quickly.

3.4 Navigation buttons

On the bottom of the screen (system bar), you can nd the navigation buttons

described as below:

Buttons Descriptions

Back

- Touch this button to go back to the previous screen or

option.

- If the on-screen keyboard is displayed, the button

changes to

. Touch it to close the on-screen

keyboard.

Home

- Touch this button to go to the central Home screen

when viewing other Home screens.

- Touch this button to go back to the last Home screen

you have viewed when launching any functions on the

device. Or touch this button again to go back to central

Home screen.

Recent Apps

A short-cut way for you to open recent application you

have accessed. Select and touch one of the images from

the list to open the application directly.

Decreased

volume button

To adjust the volume

(-) setting on the OSD menu.

Increased

volume button

To adjust the volume

(+) setting on the OSD menu.

About Your VSD242 Smart Display

1110

3.5 Status Bar

The upper right corner of the screen displays current time, and specied icon

(status bar).

Items Descriptions

Time Displays the current time.

Specied Icon Show you the enabled icon.

Status Menu

Show you the current state of your device just like Owner,

Brightness, Settings, and WIFI Settings.

3.5.1 Managing Status Menu

You can touch and drag down the Time area

on the status bar to appear the status menu.

• Touch OWNER item to view people saved on your system.

• Touch SETTINGS item to enter Settings menu that allows you to change

the display settings. For more information, please Refer to 6 Customizing

Your VSD242 Smart Display.

• Touch WI-FI item to enter WIRELESS & NETWORKS conguration menu

that allows you to enable/disable and congure Wi-Fi function.

Touch any other area of the screen to close the Status Menu.

About Your VSD242 Smart Display

1312

3.6 Customizing Your Home Screen

3.6.1 Add an Item (Shortcut)

• Touch the Home button to go back the central Home screen.

• Drag on the screen horizontally to select a Home screen where you want

to add the item.

• Touch the Apps button

located on the bottom of your screen.

• On the Apps screen, touch APPS or WIDGETS tab to enter APPS or

WIDGETS conguration screen.

• Select one of APPS or WIDGETS item that you want to add.

• Touch and hold the item to add it onto the selected Home screen.

3.6.2 Move an Item

• On the Home screen, touch and hold the item that you want to move.

• Move the item to the specied position.

• Then release your nger to add the item to the new position.

3.6.3 Delete an Item

• On the Home screen, touch and hold the item that you want to delete such

as a widget or shortcut.

• An “X Remove” will soon be displayed at the top of the Home screen.

• Drag the item over the “X Remove”.

• Then release your nger to delete the item.

3.6.4 Change the Wallpaper

• Long Touch (touch and hold) an empty space on the screen.

• A “Choose wallpaper from” conguration screen will appear.

• Select one of the wallpaper sources by touching the specied icon.

(Wallpaper sources: ES File Explorer, Gallery, Live Wallpapers and

Wallpapers)

• Tap on the desired wallpaper image. You can always exit by tapping

• Once nishing the wallpaper selection, touch “Set wallpaper” to renew the

wallpaper of Home screen.

Page is loading ...

ViewSonic VSD242-BKA-US0 User guide

Brand: ViewSonic

Model: VSD242-BKA-US0

Category: Touch screen monitors

Type: User guide

This manual is also suitable for

VSD242-BKA-US0-S

Download PDF

report

ViewSonic VSD242-BKA-US0 User guide

This manual is also suitable for

ViewSonic VSD242-BKA-US0 User guide

Related papers

Other documents