Page is loading ...
ACS-2563
Intel Atom D2550 Railway BOX PC
User Manual
Release Date Revision
Nov. 2015 V1.0
®2015 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.tw
ACS-2563 User Manual 1
Revision History
Reversion
Date
Description
1.0
2015/11/11
Official Version
ACS-2563 User Manual 2
Warning!___________________________
Disclaimer
This information in this document is subject to change without notice. In no event shall
Aplex Technology Inc. be liable for damages of any kind, whether incidental or
consequential, arising from either the use or misuse of information in this document or in
any related materials.
Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to FCC Rules, which are designed
to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to
take whatever measures may be required to correct the interference.
ACS-2563 User Manual 3
Packing List
Accessories (as ticked) included in this package are:
□ Adaptor
□ Driver & manual CD disc
□ Other.___________________(please specify)
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆ Avoid your system from static electricity on all occasions.
◆ Prevent electric shock. Don‘t touch any components of this card when the card
is power-on. Always disconnect power when the system is not in use.
◆ Disconnect power when you change any hardware devices. For instance, when
you connect a jumper or install any cards, a surge of power may damage the
electronic components or the whole system.
ACS-2563 User Manual 4
Table of Contents
Revision History………………………………………………………………………………..……………………………….1
Warning!/Disclaimer………………..............................……………………………….……………….……..….2
Packing List/Safety Precautions.....…………………………………………………………..………………………..3
Chapter 1 Getting Started
1.1 Features……………………………………………………………………………………………5
1.2 Specifications……………………………………………………………………………………5
1.3 Dimensions……………………………………………………………………………………….6
1.4 Brief Description of ACS-2563……………………………………………………………7
Chapter 2 Motherboard
2.1 Motherboard Introduction……..……………..…………………..………………..…..8
2.2 Motherboard Specifications……………….………………………..…………………...8
2.3 Chipset and Connectors Location………………………………………………….…12
2.4 Jumpers Setting and Connectors……………………………………………………..15
Chapter 3 BIOS Setup
3.1 Operations after POST Screen.............................................................38
3.2 BIOS Setup Utility….............................................................................38
3.3 Main Settings…....................................................................................39
3.4 Advanced Settings...............................................................................40
3.5 Chipset Settings...................................................................................45
3.6 Boot Settings…....................................................................................46
3.7 Security Settings..................................................................................47
3.8 Save and Exit Settings.........................................................................48
Chapter 4 Installation of Drivers
4.1 Intel Chipset Driver.…………………………………………..…….………………………51
4.2 Intel Graphics Media Accelerator Driver………………....……….……………..54
4.3 Intel (R) Network Adapter……..………………………………….…………………….57
4.4 Realtek ALC662 HD Audio Driver Installation……………….…….……………60
Figures
Figure 1.1: Dimensions of ACS-2563…………....………………………………...……...6
Figure 1.2: Front View of ACS-2563…………………………………………….....……...7
Figure 1.3: Rear View of ACS-2563………………………………………...……………....7
Figure 2.1: Mainboard Dimensions-CM-PC104-CT25……….....………..………11
Figure 2.2: Motherboard Dimensions-ECB-09……………………………………....11
ACS-2563 User Manual 5
Chapter 1 Getting Started
1.1 Features
Intel Atom Processor D2550 1.86GHz
Onboard 4GB DDR3 SDRAM
Fanless Design
1 x External CFast slot
Support 2 x Mini-PCIe Expansion
9~36V DC Wide-ranging Power Input
Anti-shock and Anti-Vibration Design
1.2 Specifications
System
Processor
Intel Atom Processor D2550 1.86GHz
System Chipset
Intel NM10 Express
System Memory
Onboard 4GB DDR3 SDRAM
Storage
1 x 2.5” SATA2
1 x CFast
OS Support
Windows Embedded Standard 7, Windows 7 Pro for
Embedded, Win CE 6.0
Outside I/O
Outside I/O
4 x RS-232/422/485 DB-9, Default RS-232 (Isolation)
1 x VGA
1 x DVI-D
1 x MIC-In
1 x Line-Out
1 x Power Switch Button
2 x USB 2.0 type A
2 x GbE LAN (by M12 Connector)
4 x USB 2.0 (by 2 x M12 Connector)
1 x 9~36V isolated DC Power Input (by M12 Connector)
2 x LED Indicator for Power and Storage
4 x LED Indicator for LAN
1 x CFast Slot
1 x Digital I/O (4-in 4-out, Isolated)
Expansion
ACS-2563 User Manual 6
Expansion Slots
2 x Mini PCIe Full Size
Power
Power Input
DC 9~36V
Power Consumption
MAX: 22.9W
Mechanical
Construction
Steel and Aluminum Heatsink
Dimension
233.6 x 151.6 x 99.2 mm
Net Weight
4.9 Kg
Environmental
Operating Temperature
-25~70 °C
Storage Temperature
-40~85 °C
Storage Temperature
10%~90%@ 40℃, non-condensing
Certificate
CE / FCC Class A
1.3 Dimensions
Figure 1.1: Dimensions of ACS-2563
ACS-2563 User Manual 7
1.4 Brief Description of ACS-2563
The ACS-2563 is a fanless Design high-efficiency thermal solution railway-application
BOX PC, powered by Intel Atom Processor D2550 1.86GHz CPU and supporting 4GB DDR3
SDRAM onboard. It comes with 1 x VGA, 1 x DVI-D, 1 x MIC in, 1 x Line-Out, 4 x COM ports, 1
x power switch button, 2 x LED indicator for storage, 4 x LED indicator for LAN and 2 x USB 2.0.
It also comes with 4 x USB 2.0, 2 x GbE LAN and 1 x DC power input all by M12 connector. It
supports 1 x 2.5” SATA2 HDD, 1 x external CFast slot, 2 x mini PCIe expansion, 1 x SIM card
slot, and 9~36V DC wide-ranging power input. It is EN-50155 certificated. The ACS-2563
works very well along with any of our Display series and it absolutely can provide an easy way
to perform control and field maintenance.
Figure 1.2: Front View of ACS-2563
Figure 1.3: Rear View of ACS-2563
ACS-2563 User Manual 8
Chapter 2 Motherboard
ACS-2563 comes with CM-PC104-CT25 motherboard and ECB-09 baseboard. This chapter will
introduce and describe the specification, dimension, connectors, and jumpers setting of
these two boards.
2.1 Motherboard Introduction
2.1.1 Motherboard Introduction - CM-PC104-CT25
CM-PC104-CT25 is X86 Core Module, onboard Intel Atom D2550 Processor, Onboard 4GB
DDRIII SDRAM, ADOtec designed 120Pin expansion interface Connection to the baseboard.
which provides abundant peripheral interfaces Signal to meet the needs of different
customers.
2.1.2 Baseboard Introduction - ECB-09
ECB-09 is a x86 Baseboard for x86 Core Module（CM-PC104-CT25),which provides abundant
peripheral interfaces to meet the needs of different customers. Also, it features dual GbE
ports, 4-COM ports, two Mini PCIE configuration, one VGA port ,one DVI-D port. The product
is widely used in various sectors of industrial control.
2.2 Motherboard Specifications
2.2.1 Motherboard Specification - CM-PC104-CT25
CM-PC104-CT25
Board Size
115.5 x 96 x 1.6mm
CPU Support
Onboard Intel Atom D2550/1.86GHz (10W, Option)
Chipset
Intel NM10 Express
Memory Support
Onboard 4GB DDRIII 800MHz FSB
Graphics
Integrated Intel GMA 3600
BIOS
AMIBIOS
LVDS interface
1 x 18/24 bit single channel LVDS to baseboard
Resolution
Up to 1366 x 768 for single channel 18/24bit LVDS
Up to 1920 x 1200 for VGA
Ethernet
2 x GbE with Intel 82583V controller (Interface to baseboard)
USB
8 x USB 2.0 Interface to baseboard (120P-2)
ACS-2563 User Manual 9
Storage
2 x SATAII Interface to baseboard (120P-2)
1 x SSD 4GB (optional)
Serial
6 x UART Pin Header (120P-1)
GPIO
8-bit GPIO Interface to baseboard (120P-2)
Audio
Realtek ALC662 HD Audio Codec
Mic in, Line out (120P-2)
KB/Mouse
1 PS/2 MS and KB Interface to baseboard (120P-2)
Battery
1 x 2Pin header support CR247(1000mAH)
Expansion
1 x CRT (120P-2)
1 x DDI bus (120P-2)
1 x SM bus (120P-2)
2 x PCI-Express [1x] bus (120P-1)
2 x FAN (120P-1)
Power
Management
DC 5V~12V Input
1 x 2 Pin Power input Connector (optional)
Temperature
Operating: -10°C to 60°C
-20°C to 70°C (option)
Storage: -40°C to 85°C
Humidity
5% - 95%, non-condensing, operating
EMI/EMS
Meet CE/FCC classA
Test baseboard: ECB-09
2.2.2 Baseboard Specification – ECB-09
ECB-09
Board Size
203mm x 146mm
Pin Out
2 x 120Pin (ADOtec designed)
Core Module
Support
CM-PC104-CT25-4G
Intel Atom D2550/1.86GHz (2cores. 10W)
Memory: 4GB DDRIII 800MHz FSB
Graphics: Integrated Intel GMA 3600
Support I/O: Winbond W83627UHG-E
BIOS
AMIBIOS
ACS-2563 User Manual 10
Display
1 x CRT Port (DB15 Connector)
1 x DVI-D Port (24+5 Pin Connector)
Support
Resolution
Up to 1920 x 1200 for CRT
Up to 1920 x 1200 for DVI-D
Storage
1 x SATAII Connector (7Pin)
1 x CFast Slot
Ethernet
2 x GbE ports. 1*8P wafer
USB
2 x USB 2.0 stack ports for external (USB1:USB02/USB03)
2 x USB 2.0 Wafe Pin header (USB2:USB04/USB05)
2 x USB 2.0 Wafe Pin header (USB3:USB06/USB07)
1 x USB 2.0 internal for mini PCIe (MPCIE1:USB00)
1 x USB 2.0 internal for mini PCIe (MPCIE2:USB01)
Serial
4 x RS232/RS422/RS485,DB9 connector (Isolation)
Pin9 with 5V/12V/Ring select
(COM1:COM01/COM02)
(COM2:COM03/COM04)
Digital I/O
8-bit digital I/O by header (4xDI, 4xDO), Pin1 with 5V
Battery
Support CR2477 Li battery by 2-pin header
Audio
2 x Stack Jack, Line-out, MIC-in
Expansion Bus
1x mini PCIe slot（MPCI1:PCIe/SIM/SMbus/USB2.0）
1x mini PCIe slot（MPCI2:PCIe/SMbus/USB2.0）
Power
Management
Wide Range DC 9~32V input
1x 2Pin DC power input connector
Switches and LED
Indicators
1 x Power on/off switch
1 x Power LED status
1 x HDD LED status
2 x LAN_ACT LED status
2 x LAN_Link LED status
1 x Buzzer
SIM
1 x SIM socket
Temperature
Operating: -20℃ to 70℃
Storage: -40℃ to 85℃
Humidity
10% - 90%, non-condensing, operating
Power
Consumption
12V /1.15A (ECB-09+ CM-PC104-CT25-4G)
EMI/EMS
Meet CE/FCC Class A
ACS-2563 User Manual 11
Figure 2.1: Motherboard Dimensions-CM-PC104-CT25
Figure 2.2: Baseboard Dimensions-ECB-09
ACS-2563 User Manual 13
2.3.2 Baseboard Chipset and Connectors – ECB-09
Board Top
ACS-2563 User Manual 14
Board Bottom
ACS-2563 User Manual 15
2.4 Jumpers Setting and Connectors
2.4.1 Motherboard Jumpers Setting and Connectors - CM-PC104-CT25
1. U1:
(FCBGA559), onboard Intel Cedarview-M/D Processors
Model
CPU
CM-PC104-CT25-4G
Intel Atom D2550
2. U12:
(BGA360), Intel NM10 Express Chipset.
3. U2, U3, U4, U5, U6, U7, U8, U9:
(FBGA78), Onboard DDRIII Memory.
Model
Memory
CM-PC104-CT25-4G
4GB
4. U17:
(SOIC8) ,Flash IC Winbond W25Q16BVSSIG.
Flash IC
U17
Baseboard
√
X
(Default)
X
√
(Option)
5. U4:
(BGA90), SSD Chipset.
Model
SSD 4GB
CM-PC104-CT25-4G
Option
6. U18/U20:
(QFN64),Intel WG82583V Chipset.
7. LED1,LED2,LED4:
LED1: Green LED for Motherboard Power status (V3.3_S5).
LED2: Green LED for Standby Power Good status (V3.3_S0).
LED4: Green LED for SSD LED status .
ACS-2563 User Manual 16
8. BAT1(option) :
(1.25mm Pitch 1x2 wafer Pin Header) 3.0V Li battery is embedded to provide power for
CMOS.
Pin#
Signal Name
Pin1
VBAT
Pin2
Ground
9. DC_IN1:
(3.5mm Pitch 1x2 Pin Connector),DC5V~12V System power input connector.
Pin#
Signal Name
Pin1
DC+5V~12V
Pin2
Ground
10. F_PANEL(option):
(2.0mm Pitch 2x5 Pin Header), Front panel connector.
Signal Name
Pin#
Signal Name
HDD LED+
1
2
POWER LED+
Ground
3
4
Ground
Ground
5
6
SW+
RESET+
7
8
Ground
BUZZER+
9
10
BUZZER-
Pin1-3: HDD LED, They are used to connect hard disk activity LED. The LED blinks nwhen the
hard disk is reading or writing data.
Pin2-4: POWER LED, They are used to connect power LED. When the system is powered on
or under S0/S1 state, the LED is normally on; when the system is under S4/S5 state,
the LED is off.
Pin5-6: POWER on/off Button, They are used to connect power switch button. The two pins
are disconnected under normal condition. You may short them temporarily to realize
system startup & shutdown or awaken the system from sleep state.
Pin7-8: RESET Button, They are used to connect reset button. The two pins are disconnected
under normal condition. You may short them temporarily to realize system reset.
Pin9-10: BUZZER, They are used to connect an external buzzer.
Note:
When connecting LEDs and buzzer, pay special attention to the signal polarity. Make sure
that the connector pins have a one-to-one correspondence with chassis wiring, or it may
cause boot up failure.
ACS-2563 User Manual 17
11. J2(option):
(2.0mm Pitch 1x9 Pin Header),Debug Port.
12. PC104+1:
(4*30 Pin Header), ADOtec designed 120Pin expansion interface Connection to the carrier
board. The definition of signal.
Function
Signal Name
Pin#
Signal Name
Function
NC
A1
B1
VCC_IN
GPIO10_422EN3
A2
B2
Ground
ICH_SPKR
A3
B3
COM1_RI-
Ground
A4
B4
COM1_RXD
DDI0_DMUX_TX0_DP
A5
B5
COM1_DTR-
DDI0_DMUX_TX-_DN
A6
B6
COM1_DSR-
DDI0_DMUX_TX1_DP
A7
B7
COM6_RI-
DDI0_DMUX_TX1_DN
A8
B8
COM6_TXD
DDI0_DMUX_TX2_DP
A9
B9
COM6_DTR-
DDI0_DMUX_TX2_DN
A10
B10
COM6_DSR-
DDI0_DMUX_TX3_DP
A11
B11
Ground
DDI0_DMUX_TX3_DN
A12
B12
COM2_CTS-
DDI0_AUX_Q_DP
A13
B13
COM2_RTS-
DDI0_AUX_Q_DN
A14
B14
COM2_RXD
DDI0_MUXIN_SCL
A15
B15
COM2_DCD-
DDI0_MUXIN_SDA
A16
B16
COM5_RI-
DDI0_HPD_N
A17
B17
COM5_TXD
Ground
A18
B18
COM5_DTR-
LVDS_TX0_DP
A19
B19
COM5_DSR-
LVDS_TX0_DN
A20
B20
12V_SENSE
LVDS_TX1_DP
A21
B21
COM3_CTS-
LVDS_TX1_DN
A22
B22
COM3_RTS-
LVDS_TX2_DP
A23
B23
COM3_RXD
LVDS_TX2_DN
A24
B24
COM4_DCD-
LVDS_TX3_DP
A25
B25
COM4_CTS-
LVDS_TX3_DN
A26
B26
COM4_RTS-
LVDS_CLK_DP
A27
B27
COM4_RXD
LVDS_CLK_DN
A28
B28
COM4_DCD-
Ground
A29
B29
Ground
NC
A30
B30
LVDS_VDD_EN
ACS-2563 User Manual 18
Function
Signal Name
Pin#
Signal Name
Function
VCC_IN
C1
D1
VCC_IN
Ground
C2
D2
VCC_IN
COM1_DCD-
C3
D3
Ground
COM1_RXD
C4
D4
GPIO7_422EN1
COM1_RTS-
C5
D5
GPIO6_DC_MODE
COM1_CTS-
C6
D6
SYS_FANTACH
COM6_DCD-
C7
D7
CPU_FANTACH
COM6_RXD
C8
D8
SIO_BKLT_CTRL
COM6_RTS-
C9
D9
CPU_FANPWM
COM6_CTS-
C10
D10
Ground
Ground
C11
D11
PCIE_RX0_C_DN
COM2_DSR-
C12
D12
PCIE_RX0_C_DP
COM2_DTR-
C13
D13
PCIE_TX0_C_DN
COM2_TXD
C14
D14
PCIE_TX0_C_DP
COM2_RI-
C15
D15
Ground
COM5_DCD-
C16
D16
PCIE_RX1_C_DN
COM5_RXD
C17
D17
PCIE_RX1_C_DP
COM5_RTS-
C18
D18
PCIE_TX1_C_DN
COM5_CTS-
C19
D19
PCIE_TX1_C_DP
Ground
C20
D20
Ground
COM3_DSR-
C21
D21
CLK_PCIE0_DP
COM3_DTR-
C22
D22
CLK_PCIE0_DN
COM3_TXD
C23
D23
Ground
COM3_RI-
C24
D24
CLK_PCIE1_DP
COM4_DSR-
C25
D25
CLK_PCIE1_DN
COM4_DTR-
C26
D26
Ground
COM4_TXD
C27
D27
LVDS_BKLT_CTRL
COM4_RI-
C28
D28
LVDS_DDC_CLK
Ground
C29
D29
LVDS_DDC_DATA
LVDS_BKLT_EN
C30
D30
Ground
13. PC104+2:
(4*30 Pin Header), ADOtec designed 120Pin expansion interface Connection to the carrier
board. The definition of signal.
Function
Signal Name
Pin#
Signal Name
Function
Ground
A1
B1
VCC_IN
LAN2_MDI0+
A2
B2
Ground
LAN2-MDI0-
A3
B3
LAN2_1000M-
ACS-2563 User Manual 19
LAN2-MDI1+
A4
B4
LAN2_100M-
LAN2_MDI1-
A5
B5
LAN2_ACT-
LAN2-MDI2+
A6
B6
Ground
LAN2-MDI2-
A7
B7
SATA_TX1_DP
LAN2_MDI3+
A8
B8
SATA_TXI_DP
LAN2_MDI3-
A9
B9
Ground
Ground
A10
B10
SATA_RX1_DN
LAN1_MDI0+
A11
B11
SATA_RX1_DP
LAN1_MDI0-
A12
B12
Ground
LAN1_MDI1+
A13
B13
SATA_TX0_DP
LAN1_MDI1-
A14
B14
SATA_TX0_DN
LAN1_MDI2+
A15
B15
Ground
LAN1_MDI2-
A16
B16
SATA_RX0_DN
LAN1_MDI3+
A17
B17
SATA_RX0_DP
LAN1_MDI3-
A18
B18
Ground
5V_S5
A19
B19
5S_S5
USB_P2_DN
A20
B20
USB_P3_DN
USB_P2_DP
A21
B21
USB_P3_DP
Ground
A22
B22
Ground
USB_OC_23_N
A23
B23
USB_P5_DN
USB_P4_DN
A24
B24
USB_P5_DDP
USB_P4_DP
A25
B25
Ground
Ground
A26
B26
USB_P6_DN
USB_P7_DN
A27
B27
USB_P6_DP
USB_P7_DP
A28
B28
GND_AUD
Ground
A29
B29
MIC_IN_R
GND_AUD
A30
B30
MIC_IN_L
Function
Signal Name
Pin#
Signal Name
Function
VCC_IN
C1
D1
VCC_IN
Ground
C2
D2
VCC_IN
LAN1_1000M_LINK-
C3
D3
Ground
LAN1_100M_LINK-
C4
D4
CM_BIOS-EN
LAN1_ACT-
C5
D5
ICH_SPI_MISO
PCIE_WAKE_N
C6
D6
ICH_SPI_CS-
PCIE_CLKREQ0-
C7
D7
ICH_SPI_CLK
PCIE_CLKREQ1-
C8
D8
ICH_SPI-MOSI
ICH_RTCTST-
C9
D9
PLTRST_N
VCC_RTC
C10
D10
FP_RST-
SMB_DATA_S5
C11
D11
FP_PWRBTN_ON-
/
