Nilox DROPS WHITE User manual

Type
User manual
EN
1
Thank you for choosing drops®, the only wearable earphones that allow you to listen to music and talk on the
phone without annoying wires.
This guide will help you make the most of your drops®, quickly and easily.
USER'S GUIDE
The earphones are associated with one another during
production.
Put both L&R headphones together and activate the earphones at the
same time by pressing the two on buttons (central button with Nilox on it) for
about 2 seconds.
Within about 20 seconds they will be associated; the led on the left
earphone will start flashing red, while the right earphone will flash blue.
Use your Bluetooth transmission device (smartphone, mp3 reader, tablet, etc.)
to search for available Bluetooth devices.
It will find “Nilox drops”; select it and, if required, enter the password (0000). You
will be notified that the device has been associated with your drops®.
You can now listen to all your favourite music.
ATTENTION: Once each earphones have been activated, the first thing they do is attempt to
associate with each other; wait for this operation to be completed before you search for drops®
from your transmission device.
WEARING YOUR EARPHONES
Your drops® can also be worn with the practical earloop provided.
EN
2
USE WITH EARBAND
Insert the microUSB connector at the end of the earloop into the corresponding earphone; the
microUSB connector permits insertion in only one way; check that the plastic part of the ear band
entirely covers the earphone.
Shape the earloop as required, however seems most comfortable to you (it is completely
“foldable” and adjustable).
Hook the earloop over your ear and insert the drop.
USE WITHOUT EARLOOP
Cover the microUSB connectors on the drop
with the caps provided.
Insert the drop in your ear as shown in the figure.
Gently turn the drops®, about 30 degrees.
Do this symmetrically on both ears.
USE WITH TELEPHONE
You can also use your drops® to talk on the phone.
Answer your phone and chat, pressing just one button.
Make sure your drops® have been associated with each other and with your telephone.
To accept an incoming call, press the on button on the right drop.
To reject an incoming call, hold the same button down for 2 seconds.
You can only activate your phone with the right drop.
EN
3
RESETTING DROPS
You can reset your drops® if you need to.
Turn them both off.
Turn them on again at the same time and hold the on button down for about 15 seconds.
The drops® will flash red and blue intermittently for about 3 seconds.
The drops® will then associate with one another.
Associate them with your smartphone or tablet again.
TECHNICAL SPECIFICATIONS
RECEIVER (BT MODE)
FREQUENCY RANGE = 2,400 < 2,483 GHz
OPERATING VOLTAGE = 3.7 V
QUIESCENT CURRENT = 5 mA
CURRENT DRAIN MAX. VOL. = 25 mA
AX OUTPUT POWER = 3.5 mW (WITHOUT FILTER)
THD = 0.25 < 1 % (MAX VOL W/400Hz, 30KHz FILTER)
S/N RATIO = 65,70 dB (MAX VOL W/400Hz 30KHz FILTER)
FREQ. RESPONSE (MAX VOL) (LO-END) = 20 < 60 Hz (@-6dB WITHOUT FILTER) (HI-END) = 16 < 20 KHz
MAX. VOLUME HUM AND NOISE MAX. = 0,2 < 0,5 mV (W/400Hz 30KHz FILTER)
CHANNEL DIFFERENCE (VOL MAX) = 10 < 20 mV
CHANNEL SEPARATION (VOL MAX) = 65 < 70 dB (W/400Hz 30KHz FILTER)
STANDARD CHARGE CURRENT = 45 < 100 mA (BATTERY @ 3.5~3.8V, POWER 5.0V)
DISTANCE = 10 Meter
BT LED = BLUE
CHARGING LED = RED
LOW BATTERY POWER OFF = 3.1 < 3.35 V
EN
4
CHARGE BOX
CHARGE INPUT CURRENT = 550 < 1000 mA ([email protected]~3.8V, POWER 5.0V)
CHARGE INPUT VOLTAGE = 4,25 < 6 V
CHARGE OUTPUT CURRENT = 45 < 100 mA ([email protected]~3.8V, POWER 5.0V)
CHARGE OUTPUT VOLTAGE = 4.45 < 5-25 V
WARRANTY AND LEGAL NOTES
Drops® have a rechargeable lithium ion polymer battery. To reduce the risk of fire, please avoid tampering, falls,
contact with water or fire.
PERSONAL SAFETY
Do not disassemble, repair, alter or modify any part of the O-ring of the product. Do not touch the product with
metallic objects or chemicals.
Any failure to comply with what above can cause risks to the person and other people.
In case of malfunctioning of the product, please contact the technical service or a qualified supplier.
TECHNICAL SUPPORT
This product is warranted in accordance with current legislation and therefore please contact your dealer in case
of need of technical assistance and / or warranty service.
EN
5
INSTRUCTIONS FOR THE ENVIRONMENT
This product may contain substances that can be harmful to the environment and to the human
health, if not disposed of properly. We therefore provide you the following information in order
to prevent the release of such substances and to improve the use of natural resources. The
electrical and electronic products should not be disposed of in the normal household waste, but
should be properly collected in order to be correctly treated. The symbol of the crossed bin
shown on the product and in this page reminds the need to properly dispose of the product at
the end of its life. In this way you can avoid that a non-specific treatment of the substances contained in these
products, or an improper use of parts of them can lead to harmful consequences for the environment and human
health. Moreover, you can contribute to the recovery, recycling and reuse of many of the materials composing
these products. That is why the manufacturers and distributors of electrical and electronic systems organize the
proper collection and disposal of the equipment themselves. At the end of the product life please contact your
dealer for instructions regarding the collection. When purchasing this product your distributor will inform you of
the possibility to replace your old device with a new one, on condition that the type of product and its functions
are the same or, if the dimensions do not exceed 25 cm, AEE can be returned without any equivalent product
purchase obligation. Any disposal of the product different from what described above will be liable to the
penalties foreseen by the laws in force in the country where the product is disposed of. Moreover we suggest to
adopt additional measures favourable to the environment: recycling the inner and outer packaging and properly
dispose of used batteries (if any). With your help we can reduce the amount of natural resources used for the
realization of electrical and electronic equipment, minimizing the use of landfills for the disposal of products and
improving the quality of life by preventing to release into the environment potentially dangerous substances.
INSTALLING AND REPLACING BATTERIES
The product contains a battery that could be replaced during the lifetime of the product itself.
At the end of life of the batteries contained in the product, they must be disposed of
separately. Throw them in the appropriate containers for the disposal of batteries.
The collection and recycling of batteries contribute to the protection of the environment and
to the preservation of material resources, allowing the recovery of valuable materials too.
EN
6
WARRANTY INFORMATION
One year, if invoiced to a company or professional (with VAT number).
Two years, if fiscally described as sold to a private citizen.
This warranty is referred to in the event a conformity defect occurs, referred to
product features.
Product support and warranty. Visit www.nilox.com to learn more.
Warranty restrictions: this warranty does not apply in the following cases:
No proof of purchase (invoice or receipt).
tampering, forcing and damages on the hardware and screen, created for any reason.
Other defects to to: inappropriate use, unauthorised hardware/software changes,
operations or storage beyond technical product specifications; incorrect
maintenance; defects due to the use of software other than that supplied and all those elements
(hardware and software) not designed to be used with the product.
The above refers to legislative decree dated February 2, 2002. Implementing the 1999/44/CE
Directive.
BRIEF DECLARATION OF CONFORMITY
This device was tested and meets European Parliament and European Commission Directive 2011/65/EC and
1999/5/EC concerning radio equipment and peripheral devices for telecommunications and their mutual
recognition.
The declaration of conformity is available in our offices and on-line at: ftp:\\ftp.hellatron.it (username:
declaration@hellatron-pwd:hellatron).
This device can thus be used in all EEC countries and in all countries where Directive 1999/5/EC applies, without
restrictions, except for:
Norway (NO): device not to be used within 20 km of Ny Alesund.
Italy (IT): This peripheral complies with the National Radio Interface and meets requirements on Frequency
Assignment. The use of this device beyond the areas where the owner works requires general authorisation. For
further information please visit: www.comunicazioni.it.
EN
7
The CE mark ( ) and/or WEEE logo ( ) on the product label may not be the minimum size
required by the regulations or not be present due to the small size of the product.
Keep the packaging for future references.
BLUETOOTH DISCLOSURE
The RF for the Bluetooth is 2.4GHz band which is sharing among Bluetooth and non-Bluetooth devices. There
are potential sources of Bluetooth (wireless) interference such as WiFi, 2.4G wireless Camera, radar, microwave
oven.
Effects of interference
A decrease in the wireless range between devices
A decrease in data throughput over Bluetooth,
Intermittent or complete loss of the wireless connection
Difficulty pairing during a Bluetooth device's discovery phase
Sources of interference
Microwave ovens: Using your microwave oven near your computer, or Bluetooth device may
cause interference.
Direct Satellite Service (DSS): The coax cable and connectors used with certain types of satellite
dishes may cause interference. Check the cable for damage and obtain newer cables if you suspect
RF leakage issues.
Certain external electrical sources such as power lines, electrical railroad tracks, and power
stations.
2.4 GHz phones: A cordless telephone that operates in this range may cause interference with
wireless devices or networks when used.
EN
8
Video senders (transmitters/receivers) that operate in the 2.4 GHz bandwidth.
Wireless speakers that operate in the 2.4 GHz band.
Certain external monitors and LCD displays: Certain displays may emit harmonic interference,
especially in the 2.4GHz band. This interference may be at its worst if you have a portable
computer with the lid closed and an external monitor connected to it.
Any other wireless devices that operate in the 2.4 GHz bandwidth (microwaves, cameras, baby
monitors, neighbour’s wireless devices, and so on).
Home and office environment
If possible, avoid wireless barriers, or change the placement of the Bluetooth devices for a clearer signal
path. The device's location within building and construction materials used can affect Bluetooth.
Outdoor and public area
Shopping mall, Airport or other highly populated with WiFi environment which are worst environments for the
Bluetooth communication. The BH1550 may not functioning as good as in office or at home. In the worst
occasion, the streaming audio may become choppy or even stop working.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Nilox DROPS WHITE User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI