4"
(101mm)
5-5/8"
(194mm)
SPACER
PROVIDED
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
LIFT
ROD
3/4"
(19mm)
MAX.
2"
(25mm)
2"
(25mm)
TOP OF
MOUNTING
SURFACE
9-1/2"
(241mm)
6-1/4" (158mm)
(ESCUTCHEON WIDTH)
2-1/4"
(57mm)
5-5/8"
(144mm)
2-3/4"
(70mm)
3-1/4"
(84mm)
LINDLEY
™
Two-Handle Lavatory Faucet
Model: 84915 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 – 1" DIA, HOLES, 4" ON CENTER
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections will accept standard ball nose connection
for 3/8" tubing
• Includes pop-up type waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel materials
STANDARDS
• Third party certified to meet CSA B-125.1, ASME A112.18.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Water Drinking Act
•
ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI