Channel Plus 7320 User manual

Channel Plus
Brand
Channel Plus
Model
7320
Category
Garage Door Opener
Type
User manual

This manual is also suitable for

Channel Plus 7320 is a solid-state color camera with 512x492 pixel resolution, 4 lux minimum illumination, and a 3.6mm lens. It includes a power supply (12 VDC @ 250 mA). The camera is designed to fit standard single gang J boxes and has a weather-resistant mount with a standard single gang gasket. The solid brass cover plate may be painted to match the house color. The camera is easy to assemble and connect, making it a good choice for home security or surveillance applications.

Channel Plus 7320 is a solid-state color camera with 512x492 pixel resolution, 4 lux minimum illumination, and a 3.6mm lens. It includes a power supply (12 VDC @ 250 mA). The camera is designed to fit standard single gang J boxes and has a weather-resistant mount with a standard single gang gasket. The solid brass cover plate may be painted to match the house color. The camera is easy to assemble and connect, making it a good choice for home security or surveillance applications.

PERFORMANCE MULTI-ROOM VIDEO
7300 Series Camera
Model 7311 B&W
Model 7320 Color
Model 7300 Universal Mounting System
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
600-104 REV B © 1997 Multiplex Technology, Inc., Brea, CA 92821-6213
Warranty
Multiplex Technology, Inc. warrants this product to be
free from defects in materials and workmanship for a
period of one year from the date of purchase or MTI will
repair, or at its option, replace the defective
product. To obtain warranty service, call MTI for a return
material authorization (RMA) number and return the
product prepaid to Multiplex Technology, Inc.,
3001 Enterprise Street, Brea, CA 92821, Attention:
Customer Service. Please put the RMA number on the
outside of the carton.
Any implied warranty arising from the sale of the
product including implied warranties of merchantability
and fitness for purpose are limited to the warranty
stated above. MTI shall not be responsible for losses or
damages or expenses, whether direct, consequential or
incidental arising from the use of or the inability to use
this product. Some states do not allow limitations on
how long the implied warranty lasts or the exclusions or
limitations or incidental or consequential damages, so
the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights, and
you may have other rights which may vary from state to
state.
7
2
7300 Universal Camera Mount
The 7300 camera mount can be used with most brands of solid-
state board cameras. The mount fits all board cameras with these
dimensions.
Model 7311 Black & White Camera
512x492 pixels, .2 lux, 3.6 mm lens
Includes power supply (12 VDC @ 250 mA)
ChannelPlus 7300 Series Solid State Cameras
The 7300 series are versatile solid state cameras, designed
to fit standard single gang J boxes. The power supply terminals
and BNC video connector are mounted on a PC board for
maximum ruggedness and dependability. The camera
mount is weather resistant and comes with a standard
single gang gasket. The solid brass cover plate may
be painted to match a house color.
42mm Max.
2mm Min.
Maximum depth depend on “J” Box.
12mm Max.
14mm
Model 7300 Universal Camera Mount
will accept cameras of these dimensions.
(it will not work with pinhole lens).
Model 7320 Color Camera
512x492 pixels, 4 lux, 3.6 mm lens
Includes power supply (12 VDC @ 250 mA)
Specifications:
Typical @ 25°C ± 5°C
Painting the Cover Plate
The solid brass cover plate may be painted to match the house color.
First, remove the camera from the plate. Lightly sand the plate using
300-400 grit wet/dry paper. Use a good quality metal primer that is rated for
exterior use. Before applying the primer, follow the manufactures instructions
for cleaning the plate. Standard house paints may now be used.
Model
Image sensor
Image
Resolution
Lens
Signal to Noise ratio
Power supply part #
Minimum illumination
Power
AGC
Power consumption
7311 7320
1/3“ interline transfer CCD
1/4“ interline transfer CCD
EIA (Black & White )
380 TV lines
3.6mm F2.0
3.6mm F2.0
50 dB
350-083
350-083
.2 lux
8-14 VDC
8-14 VDC
Yes
1 W
NTSC (Color)
330 TV lines
46 dB
4 lux
Yes
1.5 W
6 3
Locating the Camera
The camera ‘looks’ straight out from the cover plate. For a front door
application, place the camera lens 66 inches off the ground, adjacent to
the door.
Adding the DoorTel Front Door Intercom.
VIDEO DISTRIBUTION SYSTEM
R
DUAL VIDEO MODULATOR / BROADBAND AMPLIFIER / IR REPEATING SYSTEM
A ChannelPlus DoorTel system (model 9400) is an ideal addition
to this system. In this house, when the doorbell rings, the homeowner
changes the TV to the front door channel and picks up any phone in the
house. The homeowner can talk with and see the guest at the front door.
From telephone company
Assembling the Camera
Slide camera thru hole, as shown.
1
2
6-32 nuts
camera mount
vinyl gasket
Cover plate
Start nuts on studs only.
Do not tighten nuts.
Dimple on mount should fall
into hole on locking clamp.
Slide locking clamp between
bracket and camera, as shown.
Locking Clamp
(Install Farside)
SIDE VIEW
3
Align Camera Lens
to Center Hole
Locking Clamp
(Install Farside)
5
4
4
6
7
5
Assembling the Camera (cont.)
CONNECT CAMERA WIRING
TO TERMINAL BLOCK AS SHOWN.
B) TIGHTEN BOTH NUTS TO SECURE ASSEMBLY.
A) ALIGN CAMERA LENS TO HOLE IN OUTSIDE COVER.
ATTACH PC BOARD TO BRACKET
WITH 2 SCREWS, AS SHOWN.
ADD GASKET
On a typical Camera:
Video is Yellow
All other colors are ground.
+Vdc is Red
Video
Video Ground
+Vdc
Ground
BLOW-UP
Monitor
Power cable AWG 26 or larger
RG-59 or RG-6 coax
A long cable run (150ft or more) can noticeably
reduce the picture brightness and increases the
possibility of ground loop hum.
VIDEO DISTRIBUTION SYSTEM
R
DUAL VIDEO MODULATOR / BROADBAND AMPLIFIER / IR REPEATING SYSTEM
Antenna
or cable
Using an All in One Video Distribution System such as a
ChannelPlus model 3015, you may view the camera on an
unused UHF or cable channel. (For example, the front door camera
could be UHF channel 50. All antenna channels will appear normally.)
Connecting the Camera
Viewing the Camera From All TVs in a House
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Channel Plus 7320 User manual

Channel Plus
Brand
Channel Plus
Model
7320
Category
Garage Door Opener
Type
User manual
This manual is also suitable for

Channel Plus 7320 is a solid-state color camera with 512x492 pixel resolution, 4 lux minimum illumination, and a 3.6mm lens. It includes a power supply (12 VDC @ 250 mA). The camera is designed to fit standard single gang J boxes and has a weather-resistant mount with a standard single gang gasket. The solid brass cover plate may be painted to match the house color. The camera is easy to assemble and connect, making it a good choice for home security or surveillance applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents