BORETTI BRV178 User manual

BRV178

G E B R U I K S A A N W I J Z I N G

N O TI CE D ’ EMPL OI

O P E R A T I N G IN S T R U C TI O N S

B E DI E NUNG SA NL E I T UNG

©Boretti B.V.

2223 402-91

NL

FR

EN

DE

G E B R U I K S A A N W I J Z I N G

N O TI CE D ’ EMPL OI

O P E R A T I N G IN S T R U C TI O N S

B E DI E NUNG SA NL E I T UNG

Page is loading ...

28

WARNINGS

It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred to another owner, or should you move house

and leave the appliance, always ensure that the book is supplied with the appliance in order that the

new owner can be acquainted with the functioning of the appliance and the relevant warnings.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock

(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old

appliance. This will prevent it from becoming a death-trap for a child.

These warnings are provided in the interest of safety. You must read them carefully before installing or

using the appliance.

General Safety

• This appliance is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that

they do not play with the appliance.

• It is dangerous to alter the specifications or

modify this product in any way.

• Before any cleaning or maintenance work is carried

out, be sure to switch off and unplug the appliance.

• This appliance is heavy. Care should be taken

when moving it

• Ice lollies can cause frost burns if consumed

straight from the appliance.

• Take utmost care when handling your

appliance so as not to cause any damages to

the cooling unit with consequent possible

fluid leakages.

• The appliance must not be located close to

radiators or gas cookers.

• Avoid prolonged exposure of the appliance to

direct sunlight.

• There must be adequate ventilation round the

back of the appliance and any damage to the

refrigerant circuit must be avoided.

• For freezers only (except built-in models): an

ideal location is the cellar or basement.

• Do not use other electrical appliances (such

as ice cream makers) inside of refrigerating

appliances.

Service/Repair

• Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person

• This product should be serviced by an authorized

Service Centre, and only genuine spare parts

should be used.

• Under no circumstances should you attempt to

repair the appliance yourself. Repairs carried out

by inexperienced persons may cause injury or

more serious malfunctioning. Refer to your local

Service Centre, and always insist on genuine

spare parts.

• This appliance contains hydrocarbons in its

cooling unit; maintenance and recharging must

therefore only be carried out by authorized

technicians.

Use

• The domestic refrigerators and freezers are

designed to be used specifically for the storage

of edible foodstuffs only.

• Best performance is obtained with ambient

temperature between +18°C and +43°C (class T);

+18°C and +38°C (class ST); +16°C and +32°C

(class N); +10°C and +32°C (class SN). The

class of your appliance is shown on its rating

plate.

Warning: when the ambient temperature is not

included within the range indicated for the class

of this appliance, the following instructions must

be observed: when the ambient temperature

drops below the minimum level, the storage

temperature in the freezer compartment cannot

be guaranteed; therefore it is advisable to use the

food stored as soon as possible.

• Frozen food must not be re-frozen once it has

been thawed out.

• Manufacturers’ storage recommendations should

be strictly adhered to. Refer to relevant

instructions.

• The inner lining of the appliance consists of

channels through which the refrigerant passes. If

these should be punctured this would damage the

appliance beyond repair and cause food loss. DO

NOT USE SHARP INSTRUMENTS to scrape off

frost or ice. Frost may be removed by using a

plastic scraper. Under no circumstances should

solid ice be forced off the liner. Solid ice should be

allowed to thaw when defrosting the appliance.

29

CONTENTS

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Use - Cleaning the interior - Operation - Temperature regulation - Fresh food refrigeration . . . . . . . . . . . . . . . .30

Use - Freezing fresh food - Storage of frozen food - Thawing - Ice-cube production . . . . . . . . . . . . . . . . . . . . . .31

Use - Movable shelves - Positioning the door shelves - Removable drawer - Freezing calendar . . . . . . . . . . . . .32

Hints - Hints for refrigeration - Hints for freezing - Hints for storage of frozen food . . . . . . . . . . . . . . . . . . . . . . . .33

Maintenance - Periods of no operation - Periodic cleaning - Interior light - Defrosting . . . . . . . . . . . . . . . . .34

Customer service and spare parts - Technical information - Installation - Location . . . . . . . . . . . . . . .35

Installation - Shelf-holders - Electrical connection - Door Reversibility . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Installation - Building-in instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Installation - Reversibility of the freezer door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

• Do not place carbonated or fizzy drinks in the

freezer as it creates pressure on the container,

which may cause it to explode, resulting in

damage to the appliance. Do not use a

mechanical device or any artificial means to

speed up the thawing process other than those

recommended by the manufacturer. Never use

metal objects for cleaning your appliance as it

may get damaged.

Installation

• During normal operation, the condenser and

compressor at the back of the appliance heat up

considerably. For safety reasons, minimum

ventilation must be as shown in the instructions.

Attention: keep ventilation openings clear of

obstruction.

• Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must

be replaced by a special cord or assembly availa-

ble from the manufacturer or its service agent.

• If the appliance is transported horizontally, it is

possible that the oil contained in the compressor

flows in the refrigerant circuit. It is advisable to

wait at least two hours before connecting the

appliance to allow the oil to flow back in the

compressor.

• There are working parts in this product which

heat up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

• Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials.The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from municipal

authorities.The materials used on this appliance

marked by the symbol are recyclable.

Disposal of old Appliances

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. For more detailed

information about recycling of this product, please

contact your local city office, your household waste

disposal service or the shop where you purchased

the product.

30

Cleaning the interior

Before using the appliance for the first time, wash

the interior and all internal accessories with luke-

warm water and some neutral soap so as to remove

the typical smell of a brand-new product, then dry

thoroughly.

Do not use detergents or abrasive

powders, as these will damage the finish.

USE

Operation

Insert the plug into the wall socket.

Open the refrigerator door and turn the thermostat

knob, clockwise, beyond the «O» (STOP) position.

The appliance will start to operate.To stop

operation, simply turn the thermostat knob to

position «O»

Temperature regulation

The temperature is automatically regulated and can

be increased to achieve a higher temperature

(warmer) by rotating the thermostat knob toward

lower settings or reduced (colder) rotating the knob

towards higher settings.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

refrigerator depends on:

• room temperature;

• how often the door is opened;

• the quantity of food stored;

• location of appliance.

A medium setting is generally the most suitable.

Important

If the ambient temperature is high or the

appliance is fully loaded, and the appliance is

set to the lowest temperatures, it may run

continuously causing frost to form on the rear

wall. In this case the dial must be set to a higher

temperature to allow automatic defrosting and

therefore reduced energy consumption.

Fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquids in

the refrigerator;

• do cover or wrap the food, particularly if it has a

strong flavour.

• Position food so that air can circulate freely round it.

31

Storage of frozen food

When first starting-up or after a period out of use,

before putting the products in the compartment let

the appliance run for at least two hours on the

coldest setting, then turn the thermostat knob to the

normal operating position.

Important

If there is a power failure when food is in the

freezer, do not open the door of the freezer

compartment. The frozen food will not be

affected if the power cut is of short duration (up

to 6-8 hours) and the freezer compartment is full,

otherwise, it is recommended that the food

should be used within a short time (a

temperature increase of the frozen food shortens

its safe storage period).

Thawing

Deep-frozen or frozen food, prior to being used, can

be thawed in the refrigerator compartment or at

room temperature, depending on the time available

for this operation.

Small pieces may even be cooked still frozen, directly

from the freezer: in this case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or more trays

for the production of ice-cubes. Fill these trays with

water, then put them in the freezer compartment.

Do not use metallic instruments to remove the

trays from the freezer.

Freezing fresh food

The 4-star compartment is suitable for long term

storage of commercially frozen food and for freezing

fresh food.

To freeze fresh foods it is not necessary to move the

thermostat knob from the normal setting. However,

for a faster freezing operation, turn the termostat

knob to the coldest setting; but remember that, in

this condition, the refrigerator compartment

temperature might drop below 0°C. If this oocurs

reset the thermostat knob to a warmer setting.

32

Freezing Calendar

The symbols show different types of frozen goods.

The numbers indicate storage times in months for the appropriate types of frozen goods. Whether the upper or

lower value of the indicated storage time is valid depends on the quality of the foods and pre-treating before

freezing.

Removable drawer

Fruit, vegetables and bottles should be placed in the

special bottom drawer provided (see the diagram).

Movable shelves

The walls of the refrigerator are equipped with a

series of runners so that the shelves can be

positioned as desired.

D338

Positioning the door shelves

To permit storage of food packages of various sizes,

the door shelves can be placed at different heights.

To make these adjustments proceed as follows:

Gradually pull the shelf in the direction of the arrows

until it comes free, then reposition as required.

33

HINTS

Hints for refrigeration

Useful hints:

Meat (all types): wrap in polythene bags and place

on the glass shelf above the vegetable drawer.

For safety, store in this way only one or two days

at the most.

Cooked foods, cold dishes, etc..: these should be

covered and may be placed on any shelf.

Fruit and vegetables: these should be thoroughly

cleaned and placed in the special drawer(s)

provided.

Butter and cheese: these should be placed in

special airtight containers or wrapped in aluminium

foil or polythene bags to exclude as much air as

possible.

Milk bottles: these should have a cap and should

be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not

packed, must not be kept in the refrigerator.

Hints for freezing

To help you make the most of the freezing process,

here are some important hints:

• the maximum quantity of food which can be

frozen in 24 hrs. is shown on the rating plate;

• the freezing process takes 24 hours. No further

food to be frozen should be added during this

period;

• only freeze top quality, fresh and thoroughly

cleaned, foodstuffs;

• prepare food in small portions to enable it to be

rapidly and completely frozen and to make it

possible subsequently to thaw only the quantity

required;

• wrap up the food in aluminium foil or polythene

and make sure that the packages are airtight;

• do not allow fresh, unfrozen food to touch food

which is already frozen, thus avoiding a rise in

temperature of the latter;

• lean foods store better and longer than fatty

ones; salt reduces the storage life of food;

• water ices, if consumed immediately after

removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing-in date on

each individual pack to enable you to keep tab of

the storage time;

• do not put carbonated liquids (fizzy drinks,

etc.) in the freezer compartment as they may

burst.

Hints for storage of frozen food

To obtain the best performance from this appliance,

you should:

• make sure that the commercially frozen

foodstuffs were adequately stored by the retailer;

• be sure that frozen foodstuffs are transferred

from the foodstore to the freezer in the shortest

possible time;

• not open the door frequently or leave it open

longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and

cannot be refrozen.

• Do not exceed the storage period indicated by

the food manufacturer.

34

Interior light

The light bulb inside the refrigerator compartment

can be reached as follows:

- unscrew the light cover securing screw.

- unhook the moving part as shown in the figure.

If the light does not come on when the

door is open, check that it is screwed into place

properly. If it still does not light up, change the

bulb.The rating is shown on the light bulb cover.

D411

MAINTENANCE

Unplug the appliance before carrying out

any maintenance operation.

Warning

This appliance contains hydrocarbons in its cooling

unit; maintenance and recharging must therefore

only be carried out by authorized technicians.

Periodic cleaning

Clean the inside with warm water and bicarbonate of

soda. Rinse and dry thoroughly.

Clean the condenser (black grill) and the

compressor at the back of the appliance with a

brush or a vacuum cleaner. This operstion will

improve the performance of the appliance and save

electricity consumption.

Periods of non-operation

When the appliance is not in use for long periods,

take the following precautions:

remove the plug from the wall socket;

remove all food;

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent

unpleasant smells.

Defrosting

Frost is automatically eliminated from the evaporator

of the refrigerator compartment every time the motor

compressor stops, during normal use. The defrost

water drains out through a trough into a special

container at the back of the appliance, over the

motor compressor, where it evaporates.

It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water

overflowing and dripping onto the food inside.

Use the special cleaner provided, which you will

find already inserted into the drain hole.

D037

35

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check

that:

• the plug is firmly in the wall socket and the mains

power switch is on;

• there is an electricity supply (find out by plugging

in another appliance);

• the thermostat knob is in the correct position.

• If there are water drops on the bottom of the

cabinet, check that the defrost water drain

opening is not obstructed (see “Defrosting”

section).

• If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial number

of your appliance which can be found on the

guarantee certificate or on the rating plate located

inside the appliance, on the bottom left-hand side.

TECHNICAL INFORMATION

The technical infomation are situated in the rating plate on the internal left side of the appliance .

The freezer compartment, however, will become

progressively covered with frost. This should be

removed with a plastic scraper , whenever the

thickness of the frost exceeds 4 mm. During this

operation it is not necessary to switch off the power

supply or to remove the foodstuffs.

However, when the ice becomes very thick on the

inner liner, complete defrosting should be carried out

and it is advisable to carry out this operation when

the appliance is empty.

To carry out complete defrosting of the freezer

compartment proceed as follows:

1. pull out the plug from the wall socket or turn the

thermostat knob to the «O» setting;

2. remove any stored food, wrap it in several layers

of newspaper and put it in a cool place;

3. leave the door open;

4. when defrosting is completed, dry the interior

thoroughly;

5. turn the thermostat knob back to the required

setting or replace the plug in the power socket.

After letting the appliance run for at least half an

hour, replace the previously removed food into

the compartment.

Important:

Never use sharp metal tools to scrape off frost

from the evaporator as you could damage it.

Do not use a maechanical device or any artificial

means to speed up the thawing process other

than those recommended by the manufacturer.

A temperature rise of the frozen food packs,

during defrosting, may shorten their safe storage

life.

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

ATTENTION!

It must be possible to disconnect the appliance from

the mains power supply; the plug must therefore be

easily accessible after installation.

36

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a

contact for this purpose.

If the domestic power supply socket is not earthed,

connect the appliance to a separate earth in

compliance with current regulations, consulting a

specialist technician.

The Manufacturer declines all responsibility if

the above safety precautions are not observed.

Door reversibility

The appliance’s door has been locked in position for

transport by means of pins on both sides.According

to the door opening direction, remove relevant pins

at the top and at the bottom.

Shelf holders

Your appliance is equipped with shelf retainers that

make it possible to secure the shelves during

transportation.

To remove them proceed as follows:

Raise the shelf from the back, push it in the direction

of the arrow until it is freed and remove the retainers.

B

A

This appliance complies with the following

E.E.C. Directives:

- 87/308 EEC of 2/6/87 relative to radio interference

suppression.

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and

subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic

Compatibility Directive) and subsequent

modifications.

Door Reversibility

The appliance is supplied with the door

opening to the right.

For door opening in the opposite direction,

perform the following actions prior to

installation

1. Unscrew the upper pin and remove the spacer

2. Remove the door.

3. Unscrew with a key the lower pin and replace it

on the opposite side.

4. Reinsert the door, refit the spacer and rescrew

the upper pin

on the opposite side.

37

PR01

540

50

3

2

1

Building-in instructions

Dimensions of housing

Height (1) 1780 mm

Depth (2) 550 mm

Width (3) 560 mm

For safety reasons, minimum ventilation must be as

shown in Fig.

Attention: keep ventilation openings clear of

obstruction.

It is necessary that the niche is provided with a

conduct of ventilation having the following

dimensions:

Depth 50 mm

Width 540 mm

50 mm

min.

200 cm

2

200 cm

2

min.

D567

D740

Ø 2,5

13mm

Drill the unit using a Ø 2.5 mm drill (10 mm max.

penetration);

Fix the square fitting to the appliance.

1

2

44m

m

Make sure that a distance of 44 mm is maintained in

the lower part between the kitchen furniture and the

border of the appliance.

The lower hinge cover inserted in the accessories

bag, is useful to guarantee the exact position of the

kitchen furniture and the appliance.

Also make sure that the appliance does not clamp

the mains cable

38

Apply covers (C-D) on joint cover lugs and into hinge

holes.

Snap vent grille (B) and hinge covers (E) into

position.

PR266

Ha

Hb

Hc

Hd

Separate parts Ha, Hb, Hc, Hd as shown in the

figure.

D724

Apply the sealing strip pushing it between the

refrigerator and the adjacent cabinet.

Fasten the appliance with 4 screws provided in the

I

B

E

D

C

From the plastic cover (E), which is used to cover the

hinge with the pivot pin, you must take away the part

as indicated in the drawing.

This operation is made easer since there is, in the

internal part of the cover hinge lid a groove that

facilates the removal of this coomponent.

“Remove the part marked with DX, if the pivot pin is

inserted in the right hinge, SX in opposite case.”

39

Place guide (Ha) on the inside part of the furniture

door, as shown in the figure and mark the position of

external holes. After having drilled holes, fix the

guide with the screws supplied.

2

1

m

ca. 50 mm

90°

ca. 50 mm

2

1

m

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

PR168

Hb

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

PR167/1

Hd

Hb

Fix cover (Hd) on guide (Hb) until it clips into place.

Fix cover (Hc) on guide (Ha) until it clips into place

PR33

Hc

Ha

PR167

Ha

Hb

8mm

Open the appliance door and the furniture door at

90°. Insert the small square (Hb) into guide (Ha).

Put together the appliance door and the furniture

door and mark the holes as indicated in the figure.

Remove the squares and drill holes with ø 2 mm at 8

mm from the outer edge of the door. Place the small

square on the guide again and fix it with the screws

supplied.

40

Reversibility of the freezer door

180°

Page is loading ...

BORETTI B.V.

De Dollard 17

1454 AT Watergang

T + 31(0)20-4363439

F + 31(0)20-4361326

S 0900-2352673 (service)

E inf[email protected]

The Netherlands

N.V. BORETTI S.A.

Ruperlweg 16

2850 Boom

T + 32(0)3-4508180

F + 32(0)3-4586847

E inf[email protected]

Belgium

BORETTI BRV178 User manual

BORETTI BRV178 User manual

in other languages

Related papers