Sony HT-X8500 Quick start guide

Brand: Sony

Model: HT-X8500

Category: Blu-Ray players

Type: Quick start guide

Sony HT-X8500: Experience immersive surround sound with a powerful audio system featuring Dolby Atmos and DTS:X technologies. Connect your TV wirelessly via Bluetooth or with the supplied HDMI cable for high-quality audio and video transmission. Enjoy cinematic audio for movies, TV shows, and music with the Sound Bar's multiple input options. You can also control the Sound Bar with your TV remote for seamless integration into your home entertainment setup.

4-746-088-31(1)

Continued on back page

續背面

Startup Guide/入門指南

Sound Bar : HT-X8500

What’s in the box

盒中內容

Sound Bar (1)

主動式揚聲器（1）

Remote control (1)

遙控器（1）

R03 (size AAA) battery (2)

R03（AAA大小）電池（2）

HDMI cable (supports the

specification equal to Premium

High Speed HDMI Cable with

Ethernet) (1)

HDMI連接線（支援規格等同支援乙太

網路連接的特級高速HDMI傳輸線）

（1）

AC adapter (1)

交流變壓器（1）

Taiwan models

AC power cord (mains lead) (1)

台灣機型

交流電源線（1）

Models for other countries/regions

AC power cord (mains lead) (1)

其他國家/地區的機型

交流電源線（1）

WALL MOUNT TEMPLATE (1)

壁掛式安裝模板（1）

Operating Instructions

使用說明書

Startup Guide (this document)

入門指南（本文件）

Connecting a TV

連接電視機

YES/是 NO/否

Are there any HDMI IN jacks labeled “eARC” or “ARC” on your TV?

電視機是否有標示為“eARC”或“ARC”的HDMI IN插孔？

: Video signal

: 視訊訊號

: Audio signal

: 音訊訊號

HDMI cable (supplied)

HDMI連接線（附帶）

: Video signal

: 視訊訊號

: Audio signal

: 音訊訊號

HDMI cable (supplied)

HDMI連接線（附帶）

Optical digital cable

(not supplied)

光纖數位線（無附帶）

Note

•Make sure that the cable is firmly inserted.

•If you select “YES,” enable the Control for HDMI function on the TV. Otherwise, there will be no TV

sound output from the Sound Bar.

•If you select “NO,” connect the TV and the Sound Bar with not only the HDMI cable (supplied), but also

an optical digital cable (not supplied). Otherwise, there will be no TV sound output from the Sound

Bar. Check the shape of the optical digital cable’s connecters and the jacks on the TV and the Sound

Bar. Insert the connecters into the jacks in the right directions. If you forcibly insert the connecters in

the wrong directions, the connecters and the jacks may be damaged.

•To watch 4K video content, refer to “Connecting a 4K TV and 4K Devices” in the Operating Instructions

(separate document).

註

•確定連接線已插牢。

•如果選擇“是”，啟用電視機的HDMI控制功能。否則，主動式揚聲器將不會輸出電視機聲音。

•如果選擇“否”，同時透過HDMI連接線（附帶）和光纖數位線（無附帶）連接電視機和主動式揚聲器。否

則，主動式揚聲器將不會輸出電視機聲音。請檢查光纖數位線連接器與電視機及主動式揚聲器插孔的形狀。

以正確的方向將連接器插入到插孔內。如果您以錯誤方向強力插入連接器，連接器與插孔可能會損壞。

•若要觀看4K視訊內容，請參閱使用說明書（另外的文件）中的“連接4K電視機和4K裝置”。

Connecting another device

連接其他裝置

When a Blu-ray Disc™ player, cable box, satellite box, etc. is currently connected to your TV,

disconnect the device from the TV and then connect it to the HDMI IN jack on the Sound

Bar to reproduce the high quality surround sound such as Dolby TrueHD, DTS-HD, etc. If

your TV is compatible with the eARC function, you may be able to listen to high quality

surround sound while devices are connected to the TV. For details, refer to the Operating

Instructions (separate document) and the operating instructions supplied with the TV.

如果Blu-ray Disc™播放器、有線電視盒、衛星電視盒等目前連接電視機，請從電視機斷開裝置

連接，然後將裝置連接至主動式揚聲器上的HDMI IN插孔，以重現Dolby TrueHD、DTS-HD等高品

質環繞聲。如果電視機相容於eARC功能，可能可以在裝置連接電視機時聆聽高品質環繞聲。詳

情請參閱使用說明書（另外的文件）和電視機附帶的使用說明書。

: Video signal

: 視訊訊號

: Audio signal

: 音訊訊號

HDMI cable (not supplied)

HDMI連接線（無附帶）

Blu-ray Disc player,

cable box or

satellite box, etc.

Blu-ray Disc播放

器、有線電視盒或衛

星電視盒等

Note

•Make sure that the cable is firmly inserted.

•To watch 4K video content, refer to “Connecting a 4K TV and 4K Devices” in the Operating Instructions

(separate document).

註

•確定連接線已插牢。

•若要觀看4K視訊內容，請參閱使用說明書（另外的文件）中的“連接4K電視機和4K裝置”。

To set up the remote control

設定遙控器

Deciding the installation position

決定安裝位置

To mount the Sound Bar on a wall

Refer to “Mounting the Sound Bar on a Wall” in the Operating Instructions

(separate document).

在牆壁上安裝主動式揚聲器

請參閱使用說明書（另外的文件）中的“在牆壁上安裝主動式揚聲器”。

Note

•Do not place magnetic cards on the Sound Bar or near the Sound Bar.

•Do not cover the top of the Sound Bar with metal objects such as a TV frame, etc. Wireless functions

may become unstable.

•Do not place metal objects around the Sound Bar. Wireless functions may become unstable.

註

•請勿將磁卡放在主動式揚聲器上或主動式揚聲器附近。

•請勿在主動式揚聲器頂端覆蓋金屬物體，例如電視機架等。否則無線功能可能不穩定。

•請勿將金屬物體放在主動式揚聲器周圍。否則無線功能可能不穩定。

Selecting the TV connection method

選擇電視機連接方法

Connect a TV with the HDMI cable (supplied)

透過HDMI連接線（附帶）連接電視機

Go to Step 3/請前往步驟3

Connect a Sony TV with the BLUETOOTH function wirelessly

無線連接有BLUETOOTH功能的Sony電視機

Operating Instructions (separate document)

使用說明書（另外的文件）

Turning on the TV

開啟電視機的電源

Power ON

電源開啟

Turning on the Sound Bar

開啟主動式揚聲器

/

AC adapter (supplied)

交流變壓器（附帶）

AC power cord (mains lead)

(supplied)

交流電源線（附帶）







Connect the AC power cord (mains lead) (supplied) and the AC adapter

(supplied), and then insert the plug of the AC adapter into the DC IN terminal

of the Sound Bar until it clicks.



Connect the AC power cord (mains lead) to the AC outlet (mains).

The remote control of the Sound Bar does not work until all the indicators on the Sound

Bar are turned off.



Press  (power) on the remote control of the Sound Bar.

All of the indicators on the Sound Bar light up in sequence for a few seconds, and then

only the TV indicator lights up.



連接交流電源線（附帶）和交流變壓器（附帶），然後將交流變壓器的插頭插入主

動式揚聲器的DC IN端子，直到卡入到位。



將交流電源線連接到交流電插座。

在主動式揚聲器上的所有指示燈都熄滅之前，主動式揚聲器的遙控器沒有作用。



按下主動式揚聲器遙控器上的（電源）。

主動式揚聲器上的所有指示燈依序亮起數秒之後，只有TV指示燈亮起。

Listening to audio

聆聽音訊

TV input switch

電視機輸入開關

INPUT

To listen to the audio of the TV



Select the desired input using the TV remote control.

The screen switches to the television broadcast screen and the TV audio is output from

the Sound Bar.

If the TV indicator on the Sound Bar does not light up, press INPUT on the remote

control of the Sound Bar to switch to the TV input. The TV indicator on the Sound Bar

lights up.

To listen to the audio of a device that is connected to the HDMI IN jack

on the Sound Bar



Turn on the connected device. Then use the TV remote control to switch the

TV’s input to that for the HDMI IN jack to which the Sound Bar is connected.



Press INPUT on the remote control of the Sound Bar to switch to the HDMI

input.

The HDMI indicator on the Sound Bar lights up and the audio of the connected device is

output from the Sound Bar.

聆聽電視機的聲音



使用電視機遙控器選擇所要的輸入。

畫面切換為電視廣播畫面，而且主動式揚聲器輸出電視機的聲音。

如果主動式揚聲器的TV指示燈沒有亮起，請按下主動式揚聲器遙控器上的INPUT以切換為TV輸

入。主動式揚聲器的TV指示燈會亮起。

聆聽連接到主動式揚聲器HDMI IN插孔的裝置之音訊



開啟連接的裝置之電源。然後使用電視機遙控器將電視機輸入切換為主動式揚聲器

連接的HDMI IN插孔輸入。



按下主動式揚聲器遙控器上的INPUT以切換為HDMI輸入。

主動式揚聲器的HDMI指示燈亮起，連接裝置的音訊會從主動式揚聲器輸出。

Note

•Depending on the order in which you turn on the TV and the Sound Bar, the Sound Bar

may be muted and the Dolby ATMOS and BLUETOOTH indicators flash slowly. If this

happens, turn on the TV first, and then the Sound Bar.

註

•視您開啟電視機與主動式揚聲器的順序而定，主動式揚聲器可能會靜音，而且Dolby ATMOS和

BLUETOOTH指示燈會緩慢閃爍。如果發生此狀況，請先打開電視機，再啟動主動式揚聲器。

Enjoying immersive surround experience

享受令人沈醉忘我的環繞體驗

 +/–

VERTICAL S.

BASS



Press VERTICAL S. on the remote control of the Sound Bar.

The VERTICAL S. indicator on the Sound Bar lights up.

Enjoy movies, music, and more with sound that flows all around the room, surrounding

you from all directions.



Adjust the volume.

Adjust the volume of the Sound Bar by pressing  +/− on the remote control of the

Sound Bar.

Adjust the level of the bass tone by pressing BASS on the remote control of the Sound

Bar.



按下主動式揚聲器遙控器上的VERTICAL S.。

主動式揚聲器的VERTICAL S.指示燈會亮起。

享受電影、音樂與更多，聲音從所有方向環繞您，在整個房間內流動。



調整音量。

按下主動式揚聲器遙控器上的 +/-，以調整主動式揚聲器的音量。

按下主動式揚聲器遙控器上的BASS，以調整低音電平。

Note

•The surround effect from all directions differs depending on the sound source.

註

•來自所有方向的環繞效果依據音源而異。

Troubleshooting

故障排除

No TV sound is output from the Sound Bar, or no picture is displayed

on the TV.

•Press INPUT on the remote control of the Sound Bar to select the TV input. The TV indicator on the

Sound Bar lights up.

•Make sure that the input and output of the HDMI jacks on the Sound Bar are correct.

•Disconnect the cables that connect the TV and the Sound Bar, and then reconnect them firmly.

Disconnect the AC power cords (mains leads) of the TV and the Sound Bar from the AC outlets (mains),

and then reconnect them.

•When the TV and the Sound Bar are connected with the HDMI cable (supplied), enable the Control for

HDMI function or the eARC/ARC function on the TV. For details on the TV’s settings, refer to the

operating instructions supplied with the TV. For more information about the Control for HDMI function,

refer to the Operating Instructions (separate document).

•Check the sound setting of the TV. When the TV is set to output the sound from the TV speakers,

change the setting to output the sound from the external speakers.

No picture or sound from the device connected to the Sound Bar is

output.

•Press INPUT on the remote control of the Sound Bar to select the desired input. The indicator on the

Sound Bar that corresponds with the selected input lights up.

•Make sure that the input and output of the HDMI jacks on the Sound Bar are correct.

•Disconnect the cables connected to the Sound Bar, and then connect them again. Make sure that the

cables are firmly inserted.

The TV remote control does not work.

•When the Sound Bar obstructs the remote control sensor of the TV, the TV remote control may not

work. In that case, press and hold STANDARD on the remote control of the Sound Bar for 5 seconds to

set the IR repeater function to on. You can control the TV with the TV remote control. For details, refer

to “When the TV Remote Control does not Work” in the Operating Instructions (separate document).

No sound or only a very low-level sound is heard from the subwoofer.

•Press BASS on the remote control of the Sound Bar to adjust the level of the bass tone, which changes

cyclically as 0  +1  -1  0...

•The subwoofer is designed for playback of bass or low frequency sounds. When the input source does

not contain much bass sound, such as in TV programs, the bass sound from the subwoofer may be

difficult to hear.

If the problem is not solved even though you have tried the measures above, refer to

“Troubleshooting” in the Operating Instructions (separate document).

主動式揚聲器沒有輸出電視機聲音，或是電視機沒有顯示圖像。

•按下主動式揚聲器遙控器的INPUT，以選擇TV輸入。主動式揚聲器的TV指示燈會亮起。

•確定主動式揚聲器上的HDMI插孔輸入和輸出正確。

•將連接電視機和主動式揚聲器的連接線拔出，然後重新牢固連接。從交流電源插座斷開電視機和主動式揚聲器的

交流電源線，然後重新連接。

•透過HDMI連接線（附帶）連接電視機和主動式揚聲器時，在電視機上啟用HDMI控制功能或eARC/ARC功能。如需電

視機設定的詳細資訊，請參閱電視機附帶的使用說明書。如需HDMI控制功能的詳細資訊，請參閱使用說明書（另

外的文件）。

•檢查電視機的聲音設定。電視機設定為從電視揚聲器輸出聲音時，請將設定變更為從外部揚聲器輸出聲音。

連接主動式揚聲器的裝置沒有輸出圖像或聲音。

•按下主動式揚聲器遙控器的INPUT，以選擇所要輸入。主動式揚聲器上對應所選輸入的指示燈會亮起。

•確定主動式揚聲器上的HDMI插孔輸入和輸出正確。

•將連接主動式揚聲器的連接線拔出，然後重新連接。確定連接線牢固地插入。

電視機遙控器無效。

•當主動式揚聲器擋到電視機的遙控器感應器時，電視機遙控器可能會無法使用。在此狀況下，按住主動式揚聲器

遙控器上的STANDARD 5秒，以將IR中繼器功能設定為開啟。您可用電視機遙控器控制電視機。如需詳細資訊，請

參閱使用說明書（另外的文件）中的“電視機遙控器不能操作時”。

主動式重低音揚聲器沒有發出聲音或聲音非常微弱。

•按下主動式揚聲器遙控器上的BASS以調整低音電平，以0  +1  -1  0...循環變化。

•主動式重低音揚聲器專為播放低音或低頻聲音而設計。當輸入來源未含有太多低音時，例如電視節目，可能會難

以聽見主動式重低音揚聲器的低音。

如果嘗試以上措施後問題仍然沒有解決，請參閱使用說明書（另外的文件）中的“故障排除”。

Sony HT-X8500 Quick start guide

Brand: Sony

Model: HT-X8500

Category: Blu-Ray players

Type: Quick start guide

Download PDF

report

Sony HT-X8500 Quick start guide

Sony HT-X8500 Quick start guide

Related papers

Other documents