49-60647-5 5
USING THE REFRIGERATOR: Controls
Controls
The temperature controls are preset in the factory at
37°F (2.8°C) for the refrigerator compartment and 0°F
(-17.8°C)IRUWKHIUHH]HUFRPSDUWPHQW$OORZKRXUVIRU
WKHWHPSHUDWXUHWRVWDELOL]HWRWKHSUHVHWUHFRPPHQGHG
settings.
5HIULJHUDWRUWHPSHUDWXUHVFDQEHDGMXVWHGEHWZHHQ)
DQG)&WR&DQGWKHIUHH]HUWHPSHUDWXUHVFDQ
EHDGMXVWHGEHWZHHQ±)DQG)±&WR±&
To change the Refrigerator temperature:
Tactile-LED Dispenser Control
The temperature controls can display both the SET
temperature as well as the actual temperature in the
UHIULJHUDWRUDQGIUHH]HU7KHDFWXDOWHPSHUDWXUHPD\
vary slightly from the SET temperature based on usage
and operating environment.
Ŷ 2QVRPHPRGHOVVHWWLQJERWKFRQWUROVWRWKHZDUPHVW
setting until the display flashes (off) will stop cooling
LQERWKWKHIUHH]HUDQGUHIULJHUDWRUFRPSDUWPHQWV
Ŷ 2QRWKHUPRGHOVVHWWLQJHLWKHUFRQWUROWRWKHZDUPHVW
setting until the display flashes (off) will stop the
FRROLQJWRWKHIUHH]HUDQGUHIULJHUDWRU
Ŷ NOTE: Turning the refrigerator off via the controls on
the touch panel does not shut off electrical power to
the refrigerator.
NOTE: The refrigerator is shipped with protective film
FRYHULQJWKHWHPSHUDWXUHFRQWUROV,IWKLVILOPZDVQRW
removed during installation, remove it now.
Touch-LED Dispenser Control:
To change the temperature, press and release the
)REEZER TEMP/FRIDGE TEMP pad. The SET light will
come on and the display will show the set temperature. To
change the temperature, tap either the
ޔ
or
ޕ
pad until the
desired temperature is displayed.
Once the desired temperature has been set, the
temperature display will return to the actual refrigerator and
IUHH]HUWHPSHUDWXUHVDIWHUVHFRQGV6HYHUDODGMXVWPHQWV
may be required. Each time you adjust the controls, allow
24 hours for the refrigerator to reach the temperature you
have set.
The temperature controls can display both the SET temperature as
ZHOODVWKHDFWXDOWHPSHUDWXUHLQWKHUHIULJHUDWRUDQGIUHH]HU7KH
actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
Turning the cooling system off: Tactile-LED Dispenser
Control
Ŷ
On some models, setting both controls to the warmest setting
XQWLOWKHGLVSOD\IODVKHVRIIZLOOVWRSFRROLQJLQERWKWKHIUHH]HU
and refrigerator compartments.
Ŷ
On other models, setting either control to the warmest setting
XQWLOWKHGLVSOD\IODVKHVRIIZLOOVWRSWKHFRROLQJWRWKHIUHH]HU
and refrigerator.
Ŷ
NOTE: Turning the refrigerator off via the controls on the touch
panel does not shut off electrical power to the refrigerator.
Touch-LED Dispenser Control:
Press and release the FREEZER TEMP/FRIDGE TEMP
pad. Press
ޔ
WRVHWIUHH]HUWHPSHUDWXUHWR5. The
display will show OFF. To turn the unit back on, press
the FREEZER TEMP/FRIDGE TEMP pad. Press
ޔ
WRVHWWKHIUHH]HUDQGUHIULJHUDWRUWHPSHUDWXUHVWRWKH
SUHVHWSRLQWVRI)&IRUWKHIUHH]HUDQG)
(3°C) for the refrigerator.
When the unit is turned back on, it will take up to 24
KRXUVWRVWDELOL]H
Not all features are on all models. Your controls may be similar to the following:
Performance Air Flow System
7KH3HUIRUPDQFH$LU)ORZ6\VWHPLVGHVLJQHGWR
PD[LPL]HWHPSHUDWXUHFRQWUROLQWKHUHIULJHUDWRUDQG
IUHH]HUFRPSDUWPHQWV7KLVXQLTXHVSHFLDOIHDWXUH
consists of the Air Tower along the back wall of the
refrigerator and the Air Tunnel on the bottom portion of
WKHIUHH]HUUHDUZDOO
Placing food in front of the louvers on these components
will not affect performance. Although the Air Tower and
the Air Tunnel can be removed, doing so will affect
WHPSHUDWXUHSHUIRUPDQFH)RUUHPRYDOLQVWUXFWLRQV
on-line, 24 hours a day, contact us at
*($SSOLDQFHVFRPRUFDOO*(&$5(6,Q&DQDGD
contact us at geappliances.ca or call 1.800.561.3344.)
NOTE: The refrigerator is shipped with
protective film covering the temperature
FRQWUROV,IWKLVILOPZDVQRWUHPRYHG
during installation, remove it now.
Touch-LED Dispenser Control
Tactile LED Dispenser Control