EQUIPMENT MODIFICATIONS
Never install any accessory that grounds to the vehicle chassis. The chassis is a
floating ground to protect against electrical short circuits and hazards.
Do not install any non-GEM-approved accessory or modify the vehicle for the
purpose of increasing speed or power. Any modifications or installation of non-
GEM-approved accessories could create a substantial safety hazard and
increase the risk of bodily injury.
The warranty on your GEM vehicle will be terminated if any non-GEM-approved
equipment and/or modifications have been added to the vehicle that increase
speed or power.
The addition of certain accessories, including (but not limited to) mowers,
blades, tires, sprayers, or large racks, may change the handling characteristics
of the vehicle. Use only GEM-approved accessories, and familiarize yourself
with their function and effect on the vehicle.
OPERATING WITHOUT INSTRUCTION
Operating this vehicle without proper instruction
increases the risk of an accident. The operator
must understand how to operate the vehicle
properly in different situations and on different
types of terrain. All operators must read and
understand the Owner's Manual and all warning
and instruction labels before operating the
vehicle.
NOISE AND VIBRATION
This vehicle’s A-weighted emission sound pressure level at workstations does
not exceed 70 db(A). This vehicle’s vibration total value to which the hand-arm
system is subjected does not exceed 2.5 m/s 2. This vehicle’s highest root mean
square value of weighted acceleration to which the whole body is subjected
does not exceed 0.5 m/s2.
WARNING
Failure to operate this vehicle properly can result in a collision, loss of control,
accident or overturn, which may result in serious injury or death. Heed all
safety warnings outlined in this section of the owner’s manual. See the
OPERATION section of the owner’s manual for proper operating procedures.
17
SAFETY