Sharp CD-MPX860H Operating instructions

Sharp
Brand
Sharp
Model
CD-MPX860H
Category
Cassette players
Type
Operating instructions

This manual is also suitable for

Sharp CD-MPX860H is a versatile and powerful audio system that combines a CD player, cassette player, and FM/AM radio into one convenient unit. With its wide range of features, the CD-MPX860H is perfect for enjoying your favorite music, whether you're at home or on the go.

The CD player supports both CD and MP3/WMA discs, so you can enjoy your entire music collection. The cassette player makes it easy to listen to your favorite tapes, and the FM/AM radio tuner lets you tune in to your favorite radio stations.

Sharp CD-MPX860H is a versatile and powerful audio system that combines a CD player, cassette player, and FM/AM radio into one convenient unit. With its wide range of features, the CD-MPX860H is perfect for enjoying your favorite music, whether you're at home or on the go.

The CD player supports both CD and MP3/WMA discs, so you can enjoy your entire music collection. The cassette player makes it easy to listen to your favorite tapes, and the FM/AM radio tuner lets you tune in to your favorite radio stations.

The first time the unit is plugged in, the unit will enter the demonstration mode.
You will see words scroll.
1 Press the X-BASS/DEMO button to cancel the demonstration mode.
2 Press the ON/STAND-BY button to turn the power on.
ANTENNA
FM
75 OHMS
AM
GND
Left speaker
1
Accessories
Remote control × 1
TINSEA165AWZZ
07B R AS 1
3
System connections
AM loop aerial × 1
FM aerial × 1
2
Remote control battery installation
1 Open the battery cover.
2 Insert the batteries as shown.
3 Close the cover.
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Wall socket
(AC 230 V, 50 Hz)
FM aerial
AM loop aerial
Right speaker
Black
Red
MODEL
CD-MPX860H
MINI COMPONENT SYSTEM
4
Turn on your system
This quick Start Guide will help you to correctly install and
operate your system.
CD-MPX860HE QG 12/20/06, 3:13 PM1
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing down the button and the
77
77
7 button, press
the TUNER (BAND) button until “CLEAR ALL” appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
Routine maintenance is required for continued optimum
performance, refer to the operation manual.
Listening to a cassette tape
TAPE 1 TAPE 2
Listening to the radioListening to a CD or MP3/WMA disc
12 cm (5”)
8 cm (3”)
1 Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
2 Press the TUNING ( or ) button to tune in to the desired station.
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the “ST” indicator.
“ ” will appear when an FM broadcast is in stereo.
1 Open the cassette compartment by
pushing the area marked “ ”.
2 Load a cassette into the TAPE 1 compartment
or TAPE 2 compartment with the side to be
played facing towards you.
3 Press the TAPE (1 2) button to select the cassette you want to
listen to.
4 Press the / (TAPE ) button to start playback.
FM stereo mode indicator
FM stereo receiving indicator
1 Press the CD button.
2 Press the 1 button and within 5 seconds, press the button to
open the disc tray 1.
3 Place the disc on the disc tray 1, label side up.
4 Press the button to close the disc tray 1.
5 You can place discs on trays 2 - 5 by following steps 2 - 4.
6 Press the / button to start playback.
CD-MPX860HE QG 12/20/06, 3:13 PM2
  • Page 1 1
  • Page 2 2

Sharp CD-MPX860H Operating instructions

Sharp
Brand
Sharp
Model
CD-MPX860H
Category
Cassette players
Type
Operating instructions
This manual is also suitable for

Sharp CD-MPX860H is a versatile and powerful audio system that combines a CD player, cassette player, and FM/AM radio into one convenient unit. With its wide range of features, the CD-MPX860H is perfect for enjoying your favorite music, whether you're at home or on the go.

The CD player supports both CD and MP3/WMA discs, so you can enjoy your entire music collection. The cassette player makes it easy to listen to your favorite tapes, and the FM/AM radio tuner lets you tune in to your favorite radio stations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents