Features
• 1 HDMI Out, 4 HDMI In
• Display up to 4 Signals on 1 Screen
• Built in HDMI Switcher
• Remote Control Included
FUNCTION SPECIFICATION
Video Inputs 4
Video In Connection HDMI
Video Outputs 1
Video Out Connection HDMI
Power 12V DC
Current Consumption 450mA
PSU Supplied
Controls
Push Button & IR
Remote
Remote Control Included
Screen Display 7 Display Modes
Dimensions 190 x 90 x 23mm
Specication
Recommended Accessories
PART CODE DESCRIPTION
VID501 HDMI-HDMI LEAD 1M PLG-PLG
VID502 HDMI-HDMI LEAD 2M PLG-PLG
VID503 HDMI-HDMI LEAD 3M PLG-PLG
VID505 HDMI-HDMI LEAD 5M PLG-PLG
VID510 HDMI-HDMI LEAD 10M PLG-PLG
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
01246 200 000 systemq.com
HDMI QUAD 1080P - 4 INPUTS 7 MODES
1
HDM401
Other Products To Consider
HDMI Switch 3x1,
4K, 3D, Remote
Control
HDM170
KVM Switch Control
your PC/DVR/NVR
over a LAN
HDM210
HDMI Splitter1in 8
Out
HDM308
Handy Quad HD-
TVI/AHD/Analogue
QUAD050
HDMI Quad Viewer
The HDM401 can take 4 HD video and audio signals and display on a single HD monitor.
There are 7 dierent modes that can be selected which includes quad formats, two
channel, single channel xed or sequencing modes.
Buttons on the HDM401 can be used for video and audio selection but can also be
controlled using an IR remote which is supplied, along with a 12 V DC 5A PSU.
Installation Instructions
Connect 4 HD feeds to the HDM401 using HDMI cables of 15 metres maximum. Connect a
HDMI cable from the unit to a HDMI monitor, again no longer than 15 metres. Connect the
12 V DC 2A power supply to the 2.1mm power socket and connect the mains to the power
supply.
You can now use the buttons on the from of the HDM401 to select video and audio. Note
that you may prefer using the IR remote supplied with this unit to do this as you will not
have to go through all the options to select the one you require. Please note that you can
only select 720p or 1080p output using the remote control.
The HDM401 supports the following output resolutions:
Input Resolutions: 1080p, 1080i, 1360 x 768, 1280 x 1024, 1024 x 768, 720p
Output Resolutions: 1080p, 720p
The monitor picture displays may need adjusting using settings in the monitor menu if the
format causes irregular shapes e.g. oval shapes, circles etc.
Features
• 1 HDMI Out, 4 HDMI In
• Display up to 4 Signals on 1 Screen
• Built in HDMI Switcher
• Remote Control Included
FUNCTION SPECIFICATION
Video Inputs 4
Video In Connection HDMI
Video Outputs 1
Video Out Connection HDMI
Power 12V DC
Current Consumption 450mA
PSU Supplied
Controls
Push Button & IR
Remote
Remote Control Included
Screen Display 7 Display Modes
Dimensions 190 x 90 x 23mm
Specication
Recommended Accessories
PART CODE DESCRIPTION
VID501 HDMI-HDMI LEAD 1M PLG-PLG
VID502 HDMI-HDMI LEAD 2M PLG-PLG
VID503 HDMI-HDMI LEAD 3M PLG-PLG
VID505 HDMI-HDMI LEAD 5M PLG-PLG
VID510 HDMI-HDMI LEAD 10M PLG-PLG
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
01246 200 000 systemq.com
HDMI QUAD 1080P - 4 INPUTS 7 MODES
2
Other Products To Consider
HDMI Switch 3x1,
4K, 3D, Remote
Control
HDM170
KVM Switch Control
your PC/DVR/NVR
over a LAN
HDM210
HDMI Splitter1in 8
Out
HDM308
Handy Quad HD-
TVI/AHD/Analogue
QUAD050
Setting Up Screen Displays
7 Display Options
Quad
Full Screen
Switching
Vertical Split
Horizontal Split
Main Monitor &
Split Screen
Picture in Picture
*Note: Switching
Runs through 1-4 in full screen mode, switching every 15 seconds. Time is not adjustable.
The HDM401 can be set to display 7
dierent mode displays. These are as
follows:
Features
• 1 HDMI Out, 4 HDMI In
• Display up to 4 Signals on 1 Screen
• Built in HDMI Switcher
• Remote Control Included
FUNCTION SPECIFICATION
Video Inputs 4
Video In Connection HDMI
Video Outputs 1
Video Out Connection HDMI
Power 12V DC
Current Consumption 450mA
PSU Supplied
Controls
Push Button & IR
Remote
Remote Control Included
Screen Display 7 Display Modes
Dimensions 190 x 90 x 23mm
Specication
Recommended Accessories
PART CODE DESCRIPTION
VID501 HDMI-HDMI LEAD 1M PLG-PLG
VID502 HDMI-HDMI LEAD 2M PLG-PLG
VID503 HDMI-HDMI LEAD 3M PLG-PLG
VID505 HDMI-HDMI LEAD 5M PLG-PLG
VID510 HDMI-HDMI LEAD 10M PLG-PLG
All specications are approximate. System Q Ltd reserves the right
to change any product specications or features without notice.
Whilst every eort is made to ensure that these instructions are
complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors
or omissions in these instructions, or the performance or
non-performance of the equipment that these instructions refer to.
This symbol on the products and/or accompanying
documents means that used electronic equipment
must not be mixed with general household waste.
For treatment, recovery and recycling please return
this unit to your trade supplier or local designated
collection point as dened by your local council.
WEE/CG0783SS
01246 200 000 systemq.com
HDMI QUAD 1080P - 4 INPUTS 7 MODES
3
Other Products To Consider
HDMI Switch 3x1,
4K, 3D, Remote
Control
HDM170
KVM Switch Control
your PC/DVR/NVR
over a LAN
HDM210
HDMI Splitter1in 8
Out
HDM308
Handy Quad HD
TVI/AHD/Analogue
QUAD050
HDM401 Front Panel
HDM401 Rear Panel
Power LED
Denotes power
on when lit
Audio Switch
Press to select correct
audio channel
Video Mode Switch
Press to select mode 1-7
IR Sensor
This detects IR signals
from the remote
HDMI OUT
Fit HDMI lead 15m
max to monitor
LED for HDMI IN No.1
Lit when working
HDMI IN 1
Fit HDMI lead
15m max. Input 1
LED for HDMI IN No.2
Lit when working
HDMI IN 2
Fit HDMI lead
15m max. Input 2
LED for HDMI IN No.3
Lit when working
HDMI IN 3
Fit HDMI lead
15m max. Input 3
LED for HDMI IN No.4
Lit when working
HDMI IN 4
Fit HDMI lead
15m max. Input 4
DC/12V
12V DC input
requires 450mA
HDM401 Remote
IN1- IN4
Press button to select
channel number in full
screen mode
Direction Keys
Press direction key
to select previous or
next mode
Audio
Press ‘Audio’ to
select channel
audio required
Mode
Press ‘Mode’ to
select Screen
Display required
Press to select
‘Quad mode’
720P/1080P
Press to select
‘Display Resolution’
Supplied
/