American Standard 765BA101 .021 Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

LW-4 © 2016 AS America Inc.
spec_765BA.101EdgemereRHrfHET12Compl10/16
EDGEMERE RIGHT HEIGHT® ROUND FRONT
HET 12" ROUGH COMPLETE TOILET
VITREOUS CHINA
EDGEMERE RIGHT HEIGHT® ROUND FRONT
HET 12" ROUGH COMPLETE TOILET
765BA.101
•FastandeasyDIYinstallation
•Installationvideoscanbefoundon:
YouTube.com/AmericanStandard
•Qualitynisheswithdurabilitythatcan
 withstandeverydayuse
•Powerfulushholdsthehighest**MaPscoreof
 1,000gramsforoptimalwasteremoval
•RightHeightRoundFrontToiletmeets
ADARequirements
•Stayscleaner,longerwithEverClean®.
EverClean®surfaceinhibitsthegrowthofstain-
andodor-causingbacteria,moldandmildewon
thesurface
•PowerWash®rimscrubsbowlwithpressurized
 watereveryush
•Oversized3"FlushValvewithChemical
 ResistantFlapperandSiphonactionjetted
 bowlwith2"fullyglazedtrapway
•1.28gpf(4.8Lpf)meetsdenitionforHET 
 (HighEfficiencyToilet)
•MeetsEPAWaterSense®criteria
•12"Rough-in
•Completetoiletincludestank,bowl,seat,bolts
 andboltcapsandwaxring
•Generous8"x9"watersurfaceareahelpskeep
 dirtfromstickingtothebowl
•IncludesSlowClose®,color-matchedseat
•100%factoryushtested
•Limitedlifetimewarrantyonchinaware,5year
 warrantyonallmechanicalparts,and1year
 warrantyonseat.
Nominal Dimensions:
28-3/16"x17"x31-1/8"
(716x432x790mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2/CSAB45.1forVitreous
ChinaFixtures
•USEPAWaterSense®SpecicationforHET's
To Be Specied:
Color:WhiteBone
Supplywithstop
FINISHED
FLOOR
1-1/16" (27mm)
FINISHED WALL
8-5/8"
(219mm)
28-3/16"
(716mm)
16-1/2"
(419mm)
3-1/8"
80mm
2-5/16"
59mm
12"
305mm
7-3/8"
188mm 14-1/16"
357mm
16-1/2"
419mm
3/4"
19mm
SUPPLY
AS
REQUIRED 14"
355mm
17"
432mm
10-1/4"
260mm
31-1/8"
790mm
*8"
203mm *6"
152mm
C/L OF OUTLET
NOTES:
THISCOMBINATIONISDESIGNEDTOROUGH-INATAMINIMUMDIMENSION
OF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
*DIMENSIONSSHOWNFORLOCATIONOFSUPPLYARESUGGESTED.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDERED
SEPAR ATELY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithintherange
oftoleranceestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
Certified by
IAPMO R&T
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
BARRIER FREE
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
  • Page 1 1

American Standard 765BA101 .021 Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI