Zoom ZDM-1 Operating instructions

ZDM-1
Zoom
Brand
Zoom
Model
ZDM-1
Category
Microphones
Type
Operating instructions

This manual is also suitable for

Zoom ZDM-1 is a dynamic microphone with a supercardioid polar pattern, designed to deliver warm and rich broadcast-quality sound. Its high gain before feedback and SPL capability make it suitable for loud environments. The hum-bucking coil reduces interference, while the internal shock mount minimizes noise and vibrations. The all-metal construction ensures durability. It's ideal for vocals, instruments, and broadcasting.

Zoom ZDM-1 is a dynamic microphone with a supercardioid polar pattern, designed to deliver warm and rich broadcast-quality sound. Its high gain before feedback and SPL capability make it suitable for loud environments. The hum-bucking coil reduces interference, while the internal shock mount minimizes noise and vibrations. The all-metal construction ensures durability. It's ideal for vocals, instruments, and broadcasting.

ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan zoomcorp.com
© 2020 ZOOM CORPORATION Copying or reprinting this manual in part or in whole without permission is prohibited. Product names, registered trademarks and
company names in this document are the property of their respective companies. All trademarks and registered trademarks in this document are for identication
purposes only and are not intended to infringe on the copyrights of their respective owners.
Features
• Delivers a warm and rich broadcast sound
• Supercardioid polar pattern, high gain before feedback
• High SPL capability
• Hum-bucking coil to reduce interference
• The shock mount within the ZDM-1 also greatly reduces stage
noise and mechanical and environmental vibrations.
• The ZDM-1’s all-metal construction makes it very robust.
General Rules for Use
• For the best signal to noise ratio, the distance from the
microphone to the sound source should be as short as
possible.
• The sensitivity of a supercardioid microphone is highest on axis
and lowest at 120 to 135 degrees.
• To reduce crosstalk between microphones, a 1:3 guide line
should be followed: If the distance between microphone A to
the sound source A is “1”, then the distance between sound
source A and any other microphone should be more than 3
times.
Specications
Type: Dynamic | Polar Pattern: Supercardioid | Frequency Response:
50-18,000 Hz | Sensitivity: -54 dBV/Pa (2.0 mV) | Output Impedance: 200 Ω |
Min. Load Impedance: 200 Ω | Max. SPL: 135 dB | Connector: XLR-M
Furnished Accessories
Overall Dimension
Ø54 mm (Ø2.13")
150 mm (5.9")
Pivoting Stand
Mount
Threaded
adapter
Polar Patterns
0
RELATIVE RESPONSE IN dB
FREQUENCY IN Hz
20000 Hz100005000200010005002001005020
-10
-20
dB
10
Frequency Response
Monitor
Loudspeaker (s)
Recommended
Loudspeaker Locations
P.A. System
Loudspeaker
120˚–135˚ 120˚–135˚
180˚
90˚ 90˚
0˚
ZDM-1
ZOOM DYNAMIC MIC
Windscreen
Z2I-4033-01
  • Page 1 1

Zoom ZDM-1 Operating instructions

ZDM-1
Zoom
Brand
Zoom
Model
ZDM-1
Category
Microphones
Type
Operating instructions
This manual is also suitable for

Zoom ZDM-1 is a dynamic microphone with a supercardioid polar pattern, designed to deliver warm and rich broadcast-quality sound. Its high gain before feedback and SPL capability make it suitable for loud environments. The hum-bucking coil reduces interference, while the internal shock mount minimizes noise and vibrations. The all-metal construction ensures durability. It's ideal for vocals, instruments, and broadcasting.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents