Hampton Bay DIY-900PS Installation guide

Brand
Hampton Bay
Model
DIY-900PS
Type
Installation guide

This manual is also suitable for

Hampton Bay DIY-900PS is a versatile outdoor lighting solution that offers a range of customizable features to enhance your backyard ambiance. With its intuitive controls and user-friendly interface, you can effortlessly set the desired lighting schedule and enjoy the convenience of automated illumination.

Using the TIME ON/OFF mode, you can program the lights to turn on and off at specific times, ensuring your outdoor space is illuminated precisely when you need it. The PHOTOCELL AUTO ON/OFF mode provides automatic operation, activating the lights at dusk and deactivating them at dawn, eliminating the hassle of manual control.

Hampton Bay DIY-900PS is a versatile outdoor lighting solution that offers a range of customizable features to enhance your backyard ambiance. With its intuitive controls and user-friendly interface, you can effortlessly set the desired lighting schedule and enjoy the convenience of automated illumination.

Using the TIME ON/OFF mode, you can program the lights to turn on and off at specific times, ensuring your outdoor space is illuminated precisely when you need it. The PHOTOCELL AUTO ON/OFF mode provides automatic operation, activating the lights at dusk and deactivating them at dawn, eliminating the hassle of manual control.

Page 1
Page 4
PHOTOCELL
● TIME ON/OFF (Photocell is not needed,use Cap provided)
EX: To set the light on at 6:30 PM and off at 1:20AM.
1. Press MENU button to choose TIME ON/ OFF mode, the green
light lit and the screen flash, press OK button. When ON is displayed,
press OK button.
2. AM and PM LED lights flash, press UP/DOWN button to choose
PM, press OK button.
3. Hour position flashes, press UP/DOWN button to adjust the hour to
6 then press OK button.
4. Minute position flashes, press UP/DOWN button to adjust the
minute to30 then press OK button. OFF would be displayed then press
OK button.
5. AM/PM LED lights flash, press UP/DOWN arrow button to choose
AM. Press OK button.
6. Hour position flashes, press UP/DOWN button to adjust the hour to
1 then press OK button.
7. Minute position flashes, press UP/DOWN button to adjust the
minute to 20 then press OK button. Current time will be displayed.
Time on/off mode is now set.
● Remark
1. Any misoperation can be re-set by pressing MENU button.
2. For further function setting, please see the Use and Care Guide.
3.Press MENU button and the timer modes will cycle through. The
green indication light will show the current mode selection. Any
mistakes can be canceled by cycling back through the MENU button
and starting the operation over again.
4.Press the resettable overload breaker located at the bottom if the
transformer is tripped.
Quick Reference Guide
THIS QUICK REFERENCE GUIDE CAN BE
DOWNLOAD FROM WWW.HOMEDEPOT.COM
ALWAYS CONNECT THE PHOTOCELL BEFORE SET
PHOTOCELL
SLIMLINE SERIES METAL SERIES
● MANUAL ON/OFF
1. Press MENU button to select MANUAL ON/OFF mode. Green
light illuminates and display flashes, press OK button.
2. Press UP arrow button, the landscape lights will illuminate. Press
DOWN arrow button, the landscape lights will turn off.
● PHOTOCELL AUTO ON/OFF (Default factory setting)
Press MENU button to select PHOTOCELL AUTO ON/OFF mode.
Green light illuminates and display flashes, press OK button.The
landscape lights will turn on at night and off at daytime automatically.
SET CLOCK INSTRUCTION (ONLY NEEDED FOR
PHOTOCELL ON/TIME OFF and TIME ON/OFF)
● SET THE CLCOK
EX: To set the current time at 10:20 PM .
1. Press MENU button to choose CLOCK mode, the green light lit and
the screen flash, press OK button.
2.AM and PM LED lights flash, press UP/DOWN button to choose
PM, press OK button.
● Default Factory Setting is "Photo Cell Auto On/Off" mode. No
additional setup is needed if this is the desired mode after the photo
cell is connected.
● To Restore original factory setting, press and hold the OK button
for 3 seconds. The display shows 88:88 and resets to 12:00 after 1
second. The "Photocell Auto On/Off" mode green light flashes,press
OK button.
Set/Off
Set/On
Choose
Confirm
PHOTOCELL ON
PHOTOCELL
TEST
TIME ON/OFF
CLOCK
AUTO ON/OFF
MANUAL ON/OFF
MENU
OK
PMAM
TIME OFF
● PHOTOCELL ON/ TIME OFF
EX: To set the landscape lights to turn on at night and off at 11:30 PM
automatically.
3.Hour position flashes, press UP/DOWN button to adjust the hour to
10 then press OK button.
4. Minute position flashes, press UP/DOWN button to adjust the
minute to 20 then press OK button. Current time will be displayed.
Clock mode is now set.
Page 3
Page 2
1. Press MENU button to select PHOTOCELL ON/ TIME OFF
mode, Green light illuminates and display flashes, press OK button.
The display shows "OFF", press OK button.
2. AM and PM lights flash, press UP/DOWN button to select PM
then press OK button.
3. Hour position flashes, press UP/DOWN button to adjust the hour
to 11 then press OK button.
4. Minute position flashes, press UP/DOWN button to adjust the
minute to 30 then press OK button. The current time is now
displayed. The PHOTOCELL ON/TIME OFF mode is now set.
  • Page 1 1
  • Page 2 2

Hampton Bay DIY-900PS Installation guide

Brand
Hampton Bay
Model
DIY-900PS
Type
Installation guide
This manual is also suitable for

Hampton Bay DIY-900PS is a versatile outdoor lighting solution that offers a range of customizable features to enhance your backyard ambiance. With its intuitive controls and user-friendly interface, you can effortlessly set the desired lighting schedule and enjoy the convenience of automated illumination.

Using the TIME ON/OFF mode, you can program the lights to turn on and off at specific times, ensuring your outdoor space is illuminated precisely when you need it. The PHOTOCELL AUTO ON/OFF mode provides automatic operation, activating the lights at dusk and deactivating them at dawn, eliminating the hassle of manual control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents