Benro A573TBS7 Installation guide

Benro
Brand
Benro
Model
A573TBS7
Category
Security camera accessories
Type
Installation guide
USER NOTICE
• Do no t exceed the max imum speci ed
load capacity (see speci cations a t
www.BenroUSA.com).
• Always ensure that Leg and Head Locks
are tightly engaged b efo re moun ting any
gear on your Tripod.
• Always clean and dry any Tripod after it
has been exposed to wet, dusty, sandy
or salty conditions. Your Tripod is not
recommended for us e in salt water. If
required, cle an trip od using a mild soap
solution applied with a soft cloth, rinse
with fresh water and d ry with soft towel.
Remove any dust, dirt or sand fro m all Leg
Locks, Leg Sections and all moving pa rts.
• Do no t leave any Tripod in the s un for
prolonged periods and avoid high
temperat ure exposure.
• Avoid leaving any Tripod or M onopod
unattended in are as whe re people could
trip over the gear and get hurt.
• Remove cam era , lens , and all gear from
any tripod when transporting.
• For your safety, don’t let your Ben ro
gear come in contact with any electrical
power source.
Video Tripod Kits
75 Virginia Road
North White Plains, NY 10603
T 914.347.3300
F 914.347.3309
info@BenroUSA.com
BenroUSA.com
Operating Instructions
Thank you for making Benro your choice for professional photographic
equipment. Your Benro gear is manufactured to provide years of
dependable se rvice. In order to obtain optimum satisfaction and
performance, we suggest that you carefully read these instructions.
Specifications and design are subject
to ch ange w ithout notice.
Operating Instructions & User Notice
Pan Drag/Lock Lever
Alternate Pan Arm Mount
Pull Tab on circular Locking Clip, then spread Legs
to full open position.
Flip Leg Lock Levers down and slide Leg sections
to adjust height. Flip Levers up to lock.
Rotate Rubber Foot clockwise to expose Spikes for
outdoor use. Use Rubber Feet indoors.
Pan Drag/Lock Lever provides both Drag and
Locking control of horizontal head movement.
Tilt Drag/Lock lever provides both Drag and Locking
control of vertical head movement.
Pan Arm can be removed and positioned on
opposite side of head. An optional Pan Arm can also
be mounted to provide dual control.
Loosen Pan Arm Locking Lever and raise Arm to
comfortable position, then re-lock.
Loosen Quick Release Plate Lock Lever and press the
QR Safety Button to allow QR Plate to be removed. Attach
Plate to bottom of Camera using Mounting Screw then
slide back on to Head. Slide and position for best balance
and tighten QR Plate Lock Lever.
Loosen Head Lock Handle and pivot Head in Bowl
of Tripod until it is level, then tighten.
Tilt Drag/Lock Lever
Pan Arm
Leg Lock Levers
Retractable Rubber
Feet with Spikes
Spreader
Tripod
Head Lock Handle
Removable QR Plate
QR Plate Lock Lever
Pan Arm Lock Lever
QR Plate Safety Button
AD71FK5
Operation:
Head
  • Page 1 1
  • Page 2 2

Benro A573TBS7 Installation guide

Benro
Brand
Benro
Model
A573TBS7
Category
Security camera accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents