2. comica
  3. CVM-WS60 COMBO
CVM-WS60 COMBO

comica CVM-WS60 COMBO User manual

  • Hello! I am an AI chatbot trained to assist you with the comica CVM-WS60 COMBO User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How many channels does the Comica CVM-WS60 COMBO have?
    What is the battery life of the Lavalier Transmitter (TX)?
    What type of battery does the Hand-held Transmitter (HTX) use?
    What is the working temperature range of the Comica CVM-WS60 COMBO?
    What is the storage temperature range of the Comica CVM-WS60 COMBO?
    What type of audio input socket does the Lavalier Transmitter (TX) have?
    What is the maximum working distance of the Comica CVM-WS60 COMBO?
    How do I reset the Comica CVM-WS60 COMBO?
User Manual
CVM-WS60 COMBO
UHF 1-Trigger-2 Flexible Mini Wireless Microphone
Foreword
Main Features
Thanks for purchasing COMICA WS60 COMBO UHF 1-Trigger-2 flexible mini wireless
microphone.
To ensure the correct use and safety of the product, please carefully read this instruction
before using and properly assemble and operate.
. 1-Trigger-2, Universal for Smartphone & Camera
. Built-in Smartphone Holder Design, Flexible and Convenient
. Mini and Compact, Working Distance Up to 60m
(Open Area 60m, 30m in Area with Obstacle)
. 12 Channels for Multiple Devices Work Together
. M/S Switch, 10-Levels Gain Adjustment, Muting Functions
. Real-time Monitor
. Built-in Rechargeable Lithium Battery
. Volume Dynamic Monitor
. Lattice LCD Display, High Resolution
Notice
Transmitter should be used more than 20cm from Receiver, when the distance is less than
20cm, Receiver’s wireless signal receiving part will take protect action to shut down
wireless signal receiving, then audio may be intermittent, which is normal.
In the case of stereo/mono mode switch, please preset the mode before using to avoid the
transient interference caused by switching during usage.
The product utilizes TRRS-TRRS output cable, different with most TRS-TRS, or
TRS-TRRS output cables in the marketplace, cannot use it universally.
The working distance will be affected by the surrounding environment. Please try to keep
the environment open without interference during usage.
Do not use this equipment in the vicinity of heat source or interference source, such as
radiator, oven, refrigerator or air conditioner, smartphone, intercom or next to the WIFI AP.
For Smartphone users, please set to ‘Flight Mode’ during the usage to avoid incoming call
interference.
(It does not support the partial default audio mode of android systems, the third-party APP
is recommended to be used in this case).
Please keep this product in dry environment.
Do not expose the device in rain or humid environment, otherwise there will be a danger
of short circuit.
1
Packing List
Main Parts:
Lavalier Transmitter
（
TX
）
Hand-held Transmitter
（
HTX
）
WS60 HTX:
Receiver
（
RX
）
Purchase Options:
WS60 COMBO= 2TX + RX
TX TX RX
++
2
3.5mm Mic Audio Input Cable
3.5mm TRRS -3.5mm TRRS Audio Output Cable
Belt Clip
Wind Muff
Portable Case
Ball Head
Tabletop Tripod
USB-C Charging Cable
User Manual
Warranty Card
Accessories:
1
1
2
2
3
3
4
4
5
5
6
6
9
10
7
7
8
8
9
10
User Manual
CVM-WS60 COMBO
UHF 1-Trigger-2 Flexible Mini Wireless Microphone
3
Components and Instruction
Components
Lavalier Transmitter (TX)
1/4 Connecting Hole
Reset Hole
Belt Clip Connection Hole
LCD Screen
Group Selection Switch
On-off / Muting Button
Matching / Muting Status Light Indicator
USB-C Charging Interface
MIC / LINE IN Input Jack
Group Switching Button
LCF (Low Cut Filter) Switch
1
2
3
4
5
6
7
8
9
10
11
10
11
3
8
9
7
6
5
1
4
2
4
Hand-held Transmitter (HTX)
1
2
3
4
5
Microphone
LCD Display
On-off / RF Adjustment Button
Group Switching Button
AA Battery Tray
1
2
3
5
4
A B
A
B
5
Receiver (RX)
Smartphone Clamp
Locking Screw
1/4 Connecting Hole
Reset Hole
1/4 Connecting Hole
Group A Channel Selection Switch
Group B Channel Selection Switch
On-off Button
Group A Working Status Light Indicator
Group B Working Status Light Indicator
Group A Volume Adjustment Dial
Group B Volume Adjustment Dial
USB-C Charging Interface
3.5mm Audio Output Jack
3.5mm Monitoring Jack
Group Switching Button
Smartphone/Camera Switching Button
Mono/Stereo Switching Button
LCD Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
4
6
11
12
13
14
15
78910
1
2
3
5
16 17 18 19
6
Lavalier
Transmitter
(TX)
On-off/Muting Button
Long Press
Short Press
Power ON/OFF
Muting Mode
(The Mute Mode only works
after the screen lighted up)
Channel Selection Switch
Group Switching Button
LCF Switch
Short Press Channel Selection
Push
Push
Left is Group A
Right is Group B
Is Low Cut Mode
Normal Recording
Function Button Instruction
Hand-held
Transmitter
(HTX)
On-off/ Channel
Selection Button
Channel Selection Button
Long Press Power ON/OFF
Short Press Channel Selection
Push Left Group A
Push Right Group B
A B
low-cut function will filter out the low-frequency part of the audio source, such as the
chirping and crowd noise, and the main audio source will be more crisp. Turn off the
low cut to restore the true, the main source will be more vigorous, but it can be
adjusted according to actual needs.
7
Receiver
(RX)
On-Off Button
Long
Press
Power ON/OFF
Channel Selection Switch
Group Switching Button
Mono/Stereo Switch
Smartphone/Camera
Switching Button
Group Volume Adjustment
Short
Press
Press is to select Group A`s
Channel
Press is to select Group B`s
Channel
Push left to , Open Group A
only
Push
Push
Turn
Turn
Mono Mode
Stereo Mode
Smartphone Mode
Group A volume adjustment
Group B volume adjustment
Camera Mode
Push to middle , Open both
Group A and Group B
Push right to , Open Group B
only
Due to mobilephone's input limitation of external mic, stereo mode only
supports camera but not mobile phones. Stereo will be automatically
identified as mono while in mobile phone working mode.
8
10d
B
A 11 579.125MHz
Screen Display
Lavalier Transmitter
Antenna Icon
Normal Recording
Muting
Low Cut Filter
Normal Recording
Power Indication
Group A/B
Channel
Audio Dynamic Bar Frequency
Hand-held Transmitter
A
B
8 8
Normal Recording Power Indication
Group A/B
Channel
9
05
6
11
9
S
05
6
11
9
S
M
S
Receiver
Group A Signal Strength
Group A Group B
Channel A Channel B
Group A Volume
Group B VolumeGroup A Audio Receiving Dynamic Bar
Group B Audio Receiving Dynamic Bar
Group B Signal Strength
Mono Sound
：
Stereo Sound
：
Smartphone Mode
：
Camera Mode
：
Power Indication
A/B Mode
M/S Mode
Stereo Mode
Smartphone / Camera Mode
10
Indicator Light Instruction
Lavalier
Transmitter
(TX)
Receiver
(RX)
RF
A RF
B RF
A RF: Group A working status light indicator
B RF: Group B working status light indicator
Green Light Keeps on
Green Light Keeps on
Normal working status after channel
matched successfully
Red Light Keeps on
Red Light Flickers
Red Light Flickers
Normal Recording Status
The status works for transmitter only.
The receiver can pick up the sound
when channel matched successfully.
Muting Mode
Low- power Reminder
Red Light Keeps on Group closed
Green Light Flickers
Channel matching is unsuccessful
Low-power Reminder
11
The matching methods of Receiver and Transmitter
One-Triggered-One:Switch the Receiver’s Group to “A”or “B”
One-Triggered-Two:Switch the Receiver’s Group to “A/B”
1. Switch the Receiver’s Group to “A”, “B” or “A/B”, then switch
the transmitter’s Group to corresponding “A” or “B”
2. Adjust the same group’s channel of receiver and transmitter
to be consistent
（
Receiver
）
（
Receiver
）
（
Lavilier Transmitter
） （
Hand-held Transmitter
）
（
Transmitter
） （
Transmitter
）
B
1 1
05
6
11
9
S
10d
B
A 05 573.125MHz
When the working status light indicator keeps on in GREEN,
it matched successfully
A B
12
Installation and Usage
Lavalier Transmitter (TX)
USB-C Plug
Reset Hole
1. Plug the USB-C charging cable into the USB-C charging interface
then connect an external power for charging; Insert the reset pin into
the reset hole to reset it when the device is crash
POWER 5V
13
2. Insert the 3.5mm Mic Audio Input Cable into the MIC/ LINE IN
Input Jack
3. Long press the On-off Button to open the transmitter
14
06 574.125MHz
10dB
4. Target the Mic to the audio source and check whether the Lavalier
Transmitter is working properly according to the audio display bar
on the screen.
5. Connect the belt clip to the transmitter through the connection hole
Audio Dynamic Bar
6. It can be used after matched successfully with Receiver
Please refer to the matching steps for channel matching
15
2. Long press the On-off Button to start the hand-held transmitter
3. It can be used after channel matched successfully with Receiver
Hand-held Transmitter
1. Install the battery into the hand-held Transmitter’s battery tray
according to their positive and negative electrode
Please refer to the matching steps for channel matching
16
Receiver
1. Plug the USB-C charging cable into the USB-C charging interface
then connect an external power for charging; Insert the reset pin
into the reset hole to reset it when the device is crash
USB-C Plug
Reset Hole
POWER 5V
17
2. Using Methods
2.1 Method one: Using with Tripod
2.1.1 Connect Receiver and Tripod
18
2.1.2 Rotate the four clamps to the front side.
19
/