GE GFC1020N Specification

Type
Specification
GFC1020N
GE
®
1 Horsepower Continuous-Feed Disposer
For answers to your Monogram, GE Café
Series, GE Profile
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Created 3/19
Listed by
Underwriters
Laboratories
INLET/OUTLET DIAMETERS
Dishwasher inlet diameter (in.) 1
Drain outlet diameter (in.) 1-1/2
POWER/R ATINGS
Power Connection Direct Wire
Volts/Hertz/Amps 120 V/60 Hz/7.0 A
DISPOSALL
®
FOOD WASTE DISPOSER DIMENSIONS (IN INCHES)
16 1/16
5 9/16
Disposers-Continuous Feed
7 1/4
8 1/2
Specification Created 3/19
GFC1020N
GE
®
1 Horsepower Continuous-Feed Disposer
FEATURES AND BENEFITS
1 Horsepower Motor
Super-Capacity, Continuous-Feed Disposer
Over 3,500 RPM Grinding Action*
Stainless Steel Jam-Resistant, Dual-Swivel Impellers
EZ Mount installation – 3-bolt mount adapter kit included in box
Direct Wire Power Connection
Sound Reduction Technology
ColdRolled Carbon Steel Armature Shaft Material
SplashGuard
Wall Switch with Sink Stopper
Manual Reset Overload Protector
Dishwasher Drain Connector
Stainless Steel Sink Flange
Stainless Steel Turntable
2 Level Precutter
Model GFC1020N
*Based on RPM testing of cleared GE and competitive models
  • Page 1 1
  • Page 2 2

GE GFC1020N Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI