Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Recommended Maximum Weight
9913220180317
MODEL :
99132
*Unit in Pound(lbs)
No Tools Required
Recomm. 1 Person
Customer Support
www.furinno.com
NEED HELP? For replacement requests or product inquiries,
please contact our Customer Service Team by emailing us at
[email protected]. Thank you for selecting Furinno!
In order to prevent product tip over, please follow the instruction below to secure the unit to the wall.
STEP 3
1SET
Hardware List Qty
1/4”
DRILL BIT
CABLE TIE
WALL
Approx. 10 minutes
10
10
10
10
10
Furinno Turn -N-Tube 5-Tier Coner
Square Rack Display Shelf
STEP 1
Attach Round Leg (2) to the bottom of Shelf
Panel (A), as shown.
STEP 2
2.1 Tighten Long Pole (1) and attach Shelf
Panel (A) to the assembled unit, as shown.
2.2 Fix Top Cap (3) on the top of Shelf
Panel (A), as shown.
(2)x4pcs
(3)x4pcs
A
A
A
A
A
A
A
A
A
A
A
(1)x16pcs
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
16pcs
4pcs
4pcs
A 5pcs
Shelf Panel
Top Cap
No Hardware List Qty No QtyParts List
Long Pole
Round Leg
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Furinno 17046 Installation guide
-
-
-
-
-
-
-
-
-