Tools for School 235-LS01H Operating instructions

for

TOOLS

School

Extend all four legs to the desired height of the locker

shelf.

Insert the top portion of four legs into the bottom of

the shelf.

Attach the footplate to the bottom of the legs that are

attached to the sides of the shelf.

With the shelf adjusted to the smallest width, place

complete unit into locker. Gently increase the width

of the shelf by placing your hands under the shelf and

expanding outwards. The magnets will attach to the

walls of the locker, keeping the shelf and legs in place.

If adding a second shelf (sold separately), do not install

the footplate. Simply insert the four legs of the second

shelf into the slots in the top of the lower shelf.

Assembly Instructions

ADJUSTABLE

Locker Shelf

Tools for School www.tools-for-school.com Designed in the USA Made in China

This manual is also suitable for

Download PDF