Storage Concepts LS01-B02 Operating instructions

Type
Operating instructions

This manual is also suitable for

for
TOOLS
School
Extend all four legs to the desired height of the locker
shelf.
Insert the top portion of four legs into the bottom of
the shelf.
Attach the footplate to the bottom of the legs that are
attached to the sides of the shelf.
With the shelf adjusted to the smallest width, place
complete unit into locker. Gently increase the width
of the shelf by placing your hands under the shelf and
expanding outwards. The magnets will attach to the
walls of the locker, keeping the shelf and legs in place.
If adding a second shelf (sold separately), do not install
the footplate. Simply insert the four legs of the second
shelf into the slots in the top of the lower shelf.
1
2
3
4
5
Assembly Instructions
ADJUSTABLE
Locker Shelf
Tools for School www.tools-for-school.com Designed in the USA Made in China
  • Page 1 1

Storage Concepts LS01-B02 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI