Dorel Living DA7836 Installation guide

Type
Installation guide

This manual is also suitable for

Model Number: UPC Code:
DA7836
0-65857-17972-9
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Metal Pyramid Etagere
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed
with quality, convenience and style in mind. We trust it will provide you with many years of
exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture
piece by taking a few minutes to go through this booklet. It contains important information on our
warranty and care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the
model number ready when calling our toll free number 1-800-295-1980 or emailing us at
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture
can damage wood furniture.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
WARNING
Serious or fatal crushing injuries can occur from furniture tip over. To help prevent
tip over:
CUSTOMER SERVICE
If you have any questions about this product, contact our customer service representative
first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Use the wall safety strap provided to secure the unit to the wall.
NOTES
* Ensure all parts and components are present before beginning assembly.
Customer Service Department No. 413
* A Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
* To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
* Estimated assembly time: 60 minutes.
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on
top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
CARE AND CLEANING
HARDWARE LIST
2PCS
1/4"*8mm
11
10
DRAWER STOPPER
BOLT
SAFETY STRAP
8 PCS
8 PCS
6 PCS
KNOB
BOLT
SCREW
1 PC
2PCS
1PC
2 PCS
2 PCS
1/4"*1/2"
12PCS
18 PCS
32*20mm
5/32"*7/8"
1/8"*1/2"
7
5
8
Metal Pyramid Etagere
DA7836
2
1
BOLT
SCREW
SUCTION CAP
ALLEN KEY
CAM BOLT
CAM LOCK
5/32"*1/2"
8*2.5mm
4
30 PCS
M4
MULTIFUNCTION CART
Metal Pyramid Etagere
DA7836
LEFT SIDE PANEL
RIGHT SIDE PANEL
TOP PANEL
PARTS LIST
1 PC
1 PC
1 PC
STRETCHER
STRETCHER
TOP WOOD PANEL
5PCS
4 PCS
1PC
BOTTOM WOOD PANEL
X-BACK POST
X-BACK POST
1PC
1 PC
1PC
A
D
G
B
E
H
MULTIFUNCTION CART
SLIDES CONNECTOR
2PCS
STRETCHER
1PC
1PC
1 PC
P
Q
R
2PCS
S
T
DRAWER FRONT
DRAWER BOTTOM
DRAWER SLIDES
N
O
1PC
1 PC
1PC
DRAWER BACK
DRAWER LEFT SIDE PANEL
DRAWER RIGHT SIDE PANEL
M
UPPER GLASS SHELF
MIDDLE GLASS SHELF
BOTTOM GLASS SHELF
1 PC
1 PC
1 PC
Metal Pyramid Etagere
DA7836
PARTS LIST
J
K
L
STEP 1:
Metal Pyramid Etagere
DA7836
Insert cam locks (6) into drawer back (M) as shown.
Insert cam bolts (5) into drawer left side and right side panel (N & O).
Attach drawer left and right side panel (N & O) to the drawer back (M) and secure by
rotating cam locks (6) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Slide drawer bottom (Q) into the grooves of the drawer sides (N & O) and drawer back (M).
6
STEP 2:
Attach drawer front (P) to the drawer side panels (N & O) and secure by rotating cam
locks (6) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Metal Pyramid Etagere
DA7836
Attach knobs (7) to drawer front (P) with bolts (8) using a Phillips head screwdriver.
Insert cam bolts (5) into drawer front (P), and cam locks (6) into drawer side panels (N
& O) as shown.
6
8
7
STEP 3:
Attach slide connector (S) to drawer slides (R).
Metal Pyramid Etagere
DA7836
Secure slide connectors (S) to drawer back (M) with screws (9) using a Phillips head
screwdriver (not included) as shown.
Insert drawer slides (R) into drawer back (M) as shown below until they rest in the
grooves of drawer front (P).
9
STEP 4:
Metal Pyramid Etagere
DA7836
Attach drawer stoppers (10) to the bottom wood panel (G) with screws (9) using a
Phillips head screwdriver (not included) as shown.
9
1
STEP 5:
Metal Pyramid Etagere
DA7836
Attach top panel (C) to left side panel (A) with bolts (1) and Allen key
(4) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate
assembly in the following steps.
1
STEP 6:
Metal Pyramid Etagere
DA7836
Attach stretchers (D) to left side panel (A) with bolts (1) and Allen key
(4) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate
assembly in the following steps.
1
STEP 7:
Metal Pyramid Etagere
DA7836
Attach stretcher (T) to left side panel (A) with bolts (1) and Allen key
(4) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate
assembly in the following steps.
1
STEP 8:
Metal Pyramid Etagere
DA7836
Attach stretchers (E) to left side panel (A) with bolts (1) and Allen key
(4) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate
assembly in the following steps.
1
STEP 9
Metal Pyramid Etagere
DA7836
Attach right side panel (B) to the assembled unit with bolts (1) and
Allen key (4) as shown.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate
assembly in the following steps.
STEP 10
Metal Pyramid Etagere
DA7836
Attach top wood panel (F) to stretchers (E) with screws (2) using a Phillips
head screwdriver (not included) as shown.
Make sure the top wood panel (F) is properly placed before securing it to
the stretchers (E).
2
STEP 11
Metal Pyramid Etagere
DA7836
Attach bottom wood panel (G) to stretchers (E) with screws (2) using a
Phillips head screwdriver (not included) as shown.
Make sure the bottom wood panel (G) is properly placed before securing it
to the stretchers (E).
2
STEP 12
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in
the following steps.
Metal Pyramid Etagere
DA7836
Attach the X-back post (H) to left and right side panel (A & B) and
stretcher (T) as shown below with bolts (1) and Allen key (4) .
1
STEP 13
Metal Pyramid Etagere
DA7836
Attach the X-back post (I) to left and right side panel (A & B) and stretcher
(T) as shown below with bolts (1) and Allen key (4).
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in
the following steps.
1
STEP 14
Metal Pyramid Etagere
DA7836
Secure the X-back posts (H & I) with bolts (1) and Allen Key (4) as shown.
Tighten all bolts previously installed.
11
STEP 15
Metal Pyramid Etagere
DA7836
Slide the assembled drawer unit into the grooves of the drawer slides as
shown.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

Dorel Living DA7836 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI