Sony DPF-V700 Operating instructions

3-300-208-15 (1)

Digital Photo

Frame

DPF-V900/V700

Before operation

Basic operations

Advanced operations

Using an external device

Error messages

Troubleshooting

Additional information

Operating Instructions

Before operating this unit, please read this manual thoroughly and

retain it for future reference.

Owner’s Record

The model and serial numbers are located at the rear.

Record the serial number in the space provided below. Refer to

these numbers whenever you call upon your Sony dealer

regarding this product.

Model No. DPF-V900/V700

Serial No. ________________________

2

GB

To reduce fire or shock hazard, do not

expose the unit to rain or moisture.

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

IMPORTANT

SAFEGUARDS

For your protection, please read these safety

instructions completely before operating the

appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and

instructions on the appliance, or the one described

in the operating instructions and adhere to them.

Use

Power Sources

This set should be operated only from the type of

power source indicated on the marking label. If you

are not sure of the type of electrical power supplied to

your home, consult your dealer or local power

company. For those sets designed to operate from

battery power, or other sources, refer to the operating

instructions.

Polarization

This set may be equipped with a polarized ac power

cord plug (a plug having one blade wider than the

other).

This plug will fit into the power outlet only one way.

This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to

have a suitable outlet installed. Do not defeat the

safety purpose of the polarized plug by forcing it in.

Overloading

Do not overload wall outlets, extension cords or

convenience receptacles beyond their capacity, since

this can result in fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into the set through

openings as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the

manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or

polishing it. Do not use liquid cleaners or aerosol

cleaners. Use a cloth lightly dampened with water for

cleaning the exterior of the set.

WARNING

3

GB

Installation

Water and Moisture

Do not use power-line operated sets near water – for

example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to the plugs,

receptacles, and the point where the cord exits from

the appliance.

Accessories

Do not place the set on an unstable cart, stand, tripod,

bracket, or table. The set may fall, causing serious

injury to a child or an adult, and serious damage to the

set. Use only a cart, stand, tripod, bracket, or table

recommended by the manufacturer.

Ventilation

The slots and openings in the cabinet are provided for

necessary ventilation. To ensure reliable operation of

the set, and to protect it from overheating, these slots

and openings must never be blocked or covered.

– Never cover the slots and openings with a cloth or

other materials.

– Never block the slots and openings by placing the

set on a bed, sofa, rug, or other similar surface.

– Never place the set in a confined space, such as a

bookcase, or built-in cabinet, unless proper

ventilation is provided.

– Do not place the set near or over a radiator or heat

register, or where it is exposed to direct sunlight.

Lightning

For added protection for this set during a lightning

storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This will

prevent damage to the set due to lightning and power-

line surges.

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing

to qualified service personnel under the following

conditions:

– When the power cord or plug is damaged or frayed.

– If liquid has been spilled or objects have fallen into

the set.

– If the set has been exposed to rain or water.

– If the set has been subject to excessive shock by

being dropped, or the cabinet has been damaged.

– If the set does not operate normally when following

the operating instructions. Adjust only those

controls that are specified in the operating

instructions. Improper adjustment of other controls

may result in damage and will often require

extensive work by a qualified technician to restore

the set to normal operation.

– When the set exhibits a distinct change in

performance – this indicates a need for service.

Servicing

Do not attempt to service the set yourself as opening

or removing covers may expose you to dangerous

voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer that have the same

characteristics as the original parts.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the set,

ask the service technician to perform routine safety

checks (as specified by the manufacturer) to

determine that the set is in safe operating condition.

Continued

4

GB

Do not expose the batteries to

excessive heat such as sunshine, fire

or the like.

CAUTION

Replace the battery with the specified

type only. Otherwise, fire or injury

may result.

For the customers in the U.S.A.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void

your authority to operate this equipment.

If you have any questions about this product, you may

call:

Sony Customer Information Services Center

1-800-222-SONY (7669)

The number below is for the FCC related matters

only.

Regulatory Information

For the State of California, USA

only

Perchlorate Material - special handling may apply,

See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains

perchlorate.

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by

one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV

technician for help.

“Lamp in this product contains mercury. Disposal of

these materials may be regulated due to

environmental considerations. For disposal or

recycling information, please contact your local

authorities or the Electoronic Industries Alliance

(www.eiae.org).”

WARNING

Declaration of Conformity

Trade Name: SONY

Model No.: DPF-V900

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

Declaration of Conformity

Trade Name: SONY

Model No.: DPF-V700

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

5

GB

For the Customer in Europe

This product has been tested and found compliant

with the limits set out in the EMC Directive for using

connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic fields at the specific frequencies

may influence the picture of this digital photo frame.

Notice

If static electricity or electromagnetism causes data

transfer to discontinue midway (fail), restart the

application or disconnect and connect the

communication cable (USB, etc) again.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product

or on its packaging indicates

that this product shall not be

treated as household waste.

Instead it shall be handed

over to the applicable

collection point for the

recycling of electrical and

electronic equipment. By

ensuring this product is

disposed of correctly, you

will help prevent potential

negative consequences for

the environment and human health, which could

otherwise be caused by inappropriate waste handling

of this product. The recycling of materials will help to

conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the

packaging indicates that the battery

provided with this product shall not

be treated as household waste. By

ensuring these batteries are disposed

of correctly, you will help prevent

potentially negative consequences for

the environment and human health which could

otherwise be caused by inappropriate waste handling

of the battery. The recycling of the materials will help

to conserve natural resources. In case of products that

for safety, performance or data integrity reasons

require a permanent connection with an incorporated

battery, this battery should be replaced by qualified

service staff only. To ensure that the battery will be

treated properly, hand over the product at end-of-life

to the applicable collection point for the recycling of

electrical and electronic equipment. For all other

batteries, please view the section on how to remove

the battery from the product safely. Hand the battery

over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic

Office, your household waste disposal service or the

shop where you purchased the product.

Notice for the customers in the

countries applying EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart, Germany.

For any service or guarantee matters please refer to

the addresses given in separate service or guarantee

documents.

NOTICE FOR CUSTOMERS IN

THE UNITED KINGDOM

A moulded plug complying with BS 1363 is fitted to

this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be

replaced, a fuse of the same rating as the supplied one

and approved by ASTA or BSI to BS 1362,

(i.e.marked with or mark) must be used.

If the plug supplied with this equipment has a

detachable fuse cover, be sure to attach the fuse cover

after you change the fuse. Never use the plug without

the fuse cover. If you should lose the fuse cover,

please contact your nearest Sony service station.

Duplication, edition, or printing of a CD, TV

programs, copyrighted materials such as pictures or

publications, or any other materials except for your

own recording or creation is limited to private or

domestic use only. Unless you hold copyright or

have permission of copyright holders for the

materials to be duplicated, use of those materials

beyond this limit may infringe the provisions of the

copyright law and be subject to the copyright

holders claim for damages.

When using photo images with this digital photo

frame, pay special attention not to infringe the

provisions of the copyright law. Any unauthorized

use or modification of there’s portrait may also

infringe their rights.

For some demonstrations, performances, or

exhibits, photography may be forbidden.

Continued

6

GB

Notes on LCD screen

• The displayed image on the screen is not identical in

picture quality and colors with the printed image

because phosphor methods or profiles differ. Please

regard the displayed image as just a reference.

• Do not press against the LCD screen. The screen

may be discolored and that may cause a

malfunction.

• Exposing the LCD screen to direct sunlight for long

periods may cause malfunctions.

• The LCD screen is manufactured using extremely

high-precision technology, so over 99.99% of the

pixels are operational for effective use. However,

there may be some tiny black points and/or bright

points (white, red, blue or green in color) that

constantly appear on the LCD screen. These points

are normal in the manufacturing process and do not

affect the printing in any way.

• Images may trail across on the LCD screen in a cold

location. This is not a malfunction.

On trademarks and copyrights

• , BRAVIA, BRAVIA Sync, ,

“PhotoTV HD”, , Cyber-shot, , “Memory

Stick”, , “Memory Stick Duo”,

, “MagicGate Memory

Stick”, “Memory Stick PRO”,

, “Memory Stick PRO Duo”,

, “Memory Stick PRO-HG

Duo”, , “Memory Stick

Micro”, , , “Memory Stick-

ROM”, , “MagicGate”, and

are trademarks or registered

trademarks of Sony Corporation.

• HDMI, , and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

• Microsoft, Windows, and Windows Vista are either

registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other

countries.

• Macintosh and Mac OS are registered trademarks of

Apple Inc. in the United States and/or other

countries.

• Intel and Pentium are the registered trademarks or

trademarks of Intel Corporation.

• CompactFlash is a trademark of SanDisk

Corporation in the U.S.A.

• or xD-Picture Card™ is a trademark of

FUJIFILM Corporation.

• is a trademark of FotoNation Inc. in the

U.S.A.

• is a trademark of Ichikawa Soft

Laboratory.

• Contains iType

TM

and fonts from Monotype

Imaging Inc.

iType

TM

is a trademark of Monotype Imaging Inc.

• All other companies and product names mentioned

herein may be the trademarks or registered

trademarks of their respective companies.

Furthermore, “™” and “

®

” are not mentioned in

each case in this manual.

• This unit is equipped with face recognition feature.

Sony Face Recognition technology developed by

Sony is used.

• The Bluetooth word mark and logos are owned by

the Bluetooth SIG, Inc. and any use of such marks

by Sony Corpration is under licence. Other

trademarks and trade names are those of their

resective owners.

Backup recommendations

To avoid potential risk of data loss caused by

accidental operation or malfunction of the digital

photo frame, we recommend that you save a

backup copy of your data.

Information

IN NO EVENT SHALL SELLER BE LIABLE

FOR ANY DIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OF ANY

NATURE, OR LOSSES OR EXPENSES

RESULTING FROM ANY DEFECTIVE

PRODUCT OR THE USE OF ANY PRODUCT.

Sony shall assume no responsibility for any

accidental or consequential damages or loss of the

recording contents which may be caused by use or

malfunction of the digital photo frame or memory

card.

7

GB

Notice for users

described herein, in whole or in part, may not be

reproduced, translated or reduced to any machine

readable form without prior written approval from

Sony Corporation.

IN NO EVENT SHALL SONY CORPORATION BE

LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES,

WHETHER BASED ON TORT, CONTACT, OR

OTHERWISE, ARISING OUT OF OR IN

CONNECTION WITH THIS MANUAL, THE

SOFTWARE OR OTHER INFORMATION

CONTAINED HEREIN OR THE USE THEREOF.

By breaking the seal of the envelope of the CD-ROM

package, you accept all the terms and conditions of

this agreement. If you do not accept these terms and

conditions, please return this disk envelope unopened,

along with the rest of the package, immediately to the

dealer where you obtained it.

Sony Corporation reserves the right to make any

modification to this manual or the information

contained herein at any time without notice.

The software described herein may also be governed

by the terms of a separate user license agreement.

Any design data such as sample pictures provided in

this software cannot be modified or duplicated except

for the purpose of personal use. Any unauthorized

duplication of this software is prohibited under

copyright law.

Please note that unauthorized duplication or

modification of portraits or copyrighted work could

infringe the rights reserved by rights holders.

On the illustrations and screen

shots used in this manual

The illustrations and screen shots used in this

manual are of the DPF-V900 unless noted

otherwise.

8

GB

Table of Contents

Before operation

Enjoy your photo frame in various

ways .............................................10

Features ........................................12

Checking included items ...............13

Identifying the parts .....................13

Basic operations

Preparing the remote control ........16

Connecting to the AC power

source ..........................................17

Setting the stand ..........................18

Turning the photo frame on ..........19

Setting the clock ...........................20

Inserting a memory card and viewing

images ..........................................21

Inserting a memory card ................ 21

Displaying images ......................... 23

Advanced operations

AUTO TOUCH-UP .........................28

Specifying the playback device .....29

Adjusting the image size and

position ........................................29

Enlarging an image ........................ 29

Rotating an image .......................... 29

Adding to the internal memory .....30

Exporting an image .......................32

Deleting an image .........................33

Changing the various settings ......34

Setting procedure ...........................34

Items to set .....................................35

Connecting to a high definition TV to

view images ..................................37

Connecting to a high definition

TV ...................................................37

Using an external device

Using a Bluetooth device ..............39

Transferring images from an external

device ...........................................39

Connecting to a computer ............40

System requirements ......................40

Connecting to a computer to exchange

images ............................................41

Error messages

If an error message appears .........42

Troubleshooting

If trouble occurs ...........................44

Additional information

Precautions ..................................48

On safety ........................................48

On installation ................................48

On cleaning ....................................48

On restrictions on duplication ........49

9

GB

About the memory cards ..............49

“Memory Stick” ..............................49

SD memory card ............................50

xD-Picture Card .............................51

CompactFlash card ........................51

Notes on using a memory card .......51

Specifications ...............................52

Index ............................................54

10

GB

Before operation

Enjoy your photo frame in various ways

Input to the photo frame

As shown on the left, the photo frame gives

priority in order of computer, external device,

and memory card if computer and memory

cards are connected/inserted to the photo

frame. If multiple memory cards are inserted,

the images of the memory card you inserted

first are displayed.

Easy display of images in a memory card or external device such as

a digital camera

Various display functions

In addition to slideshows, you can enjoy various display modes easily including the

single image, index, clock, and calendar modes. (.page 23)

Adding important images to an album (saving to the internal memory)

Images added to the album are saved in the internal memory. You can also export

these images to a memory card or external device. (.page 30)

11

GB

Before operation

Various devices you can use Connecting to your computer

Images can be copied from a computer easily.

You can also save images in the album to a

computer as a backup. Images can also be

exchanged with a memory card, USB memory,

etc. and copied from a Bluetooth compatible

device.

Enjoying images on a large TV screen

If you connect the photo frame to a TV with an HDMI cable, you can enjoy

slideshows and single image display on a large screen. (.page 37)

12

GB

Features

The Sony DPF-V900/V700 is a digital photo

frame for easily displaying images taken with a

digital camera or other device without using a

computer.

x Support for various memory cards*

Supports various memory cards used by

digital cameras and other devices, such as a

“Memory Stick”, CompactFlash card, SD

memory card, and xD-Picture Card. Just

insert a memory card removed from a digital

camera or other device, then you will be able

to view the images immediately.

x Easy transfer of images taken with a

Bluetooth compatible mobile phone

or other device*

You can transfer images to the photo frame’s

internal memory from a Bluetooth

compatible device via a Bluetooth adaptor

(optional).

x Support for mass storage compatible

devices*

x Connecting to a high definition TV to

display images on a large screen

Using the photo frame’s HDMI output

connector, you can enjoy the images in a

memory card, external device, or internal

memory on a large screen.

x Various modes

The displayed image can be switched

automatically as though you are turning the

pages of an album yourself. You can select

from various modes including just images,

clock, and calendar view. You can also

change playback settings such as the

playback order.

x Various display functions

You can enjoy various view modes, such as

displaying an analog clock, digital clock or

calendar. And the photo frame can display

images on single image display, index image

display, zoom in/zoom out or fit to screen

mode.

x Automatic rotation of images

The photo frame automatically rotates

images to their proper orientation. Images

are also automatically rotated when the

photo frame is set in either the portrait or

landscape position. (Menu screen is not

rotated.)

x Easy operation by remote control

x Adding images to internal memory

The images you add to the album are saved

to internal memory.

x Exporting images

You can export images in the album to your

memory card.

x AUTO TOUCH-UP features

You can enjoy beautiful images by

automatic corrections of backlight, focus,

red-eye, and skin smoothing.

x Connecting to a computer to

exchange the images

* We do not guarantee proper operations for all types

of devices.

13

GB

Before operation

Checking included

items

Make sure that the following items are

included.

• Digital photo frame (1)

• Remote control (1)

•AC adaptor (1)

• AC power cord (1)

• Operating Instructions (this manual) (1)

• Warranty (1)

(In some regions, the warranty is not

supplied.)

Identifying the parts

For details, see the pages indicated in the

parentheses.

The illustrations are of the DPF-V900. The

locations and names of buttons and connectors

of the DPF-V700 are identical to those of the

DPF-V900, although the LCD screen size is

different.

Front

A LCD screen

B Remote sensor

When using the supplied remote control, point

it at this sensor.

Continued

14

GB

Rear

A Connector for USB A/Bluetooth

adaptor (.page 39)

You can transfer images wirelessly from a

BLUETOOTH™ compatible mobile phone or

digital camera by connecting a Bluetooth

adaptor (optional: DPPA-BT1).

You can also connect a digital camera, USB

memory, or photo storage compatible with

USB mass storage.

B USB miniB connector

(.page 41)

Connect a USB cable when you want to use

the photo frame with a computer.

C HDMI OUT (output) connector

(.page 37)

Connect an HDMI cable when you want to

view images on a high definition TV.

D DC IN 8.4 V jack (.page 17)

Insert the plug of the supplied AC adaptor to

this jack, and connect the AC power cord to

the AC adaptor and the wall outlet.

E Stand (.page 18)

F VIEW MODE button

G Access lamp

H “Memory Stick PRO” (Standard/

Duo) slot (.page 21)

I CompactFlash card/Microdrive

slot (.page 21)

J 1 (on/standby) button/(standby)

indicator

K MENU button

Displays the menu.

You can use the menu to operate same

functions of buttons on remote control such as

[Slideshow], [Rotate], [Add to album] and

[Clock] from the menu.

L Direction (v/V) buttons

These buttons move the cursor.

M ENTER button

N Reset switch

When this switch is pushed, the photo frame

is turned off forcibly and Date/time setting

returns to its factory default setting.

Use thin object such as a pin to push the

switch. (page 47)

O SD memory card/MMC/xD-Picture

Card slot (.page 21)

15

GB

Before operation

Remote control

A VIEW MODE button

B (clock) button (.page 26)

C (slideshow) button

(.page 24)

D MENU button

E BACK button

F 1 (on/standby) button

G (add to album) button

(.page 30)

H (zoom in)/ (zoom out) buttons

(.page 29)

I (index) button (.page 26)

This button switches from the image preview

screen to index view screen.

J Direction (B/b/v/V) buttons

K (enter) button

L (rotation) button (.page 29)

16

GB

Basic operations

Preparing the remote

control

The supplied lithium battery (CR2025) has

already been inserted into the remote control.

Pull out the protective sheet before use as

shown in the figure.

Using the remote control

Point the top end of the remote control towards

the remote sensor on the photo frame.

Replacing the battery of the

remote control

If the remote control stops working, replace the

battery (CR2025 lithium battery) with a new

one.

1 Pull out the battery holder.

While pressing in the tab of the battery

holder, pull out the battery holder.

2 Remove the old battery from the

battery holder and then insert a new

battery.

Insert the battery so that “+” is facing

upwards.

3 Reinsert the battery holder into the

remote control.

Notes

• When the lithium battery becomes weak, the

operating distance of the Remote conrol may

shorten, or the Remote control may not function

properly. In this case, replace the battery with a

Sony CR2025 lithium battery. Use of another

battery may present a risk of fire or explosion.

Protective sheet

Remote

sensor

WARNING

Battery may explode if mistreated. Do not

recharge, disassemble or dispose of in fire.

17

GB

Basic operations

• Using a battery other than the specified one may

result in the battery rupturing.

• Dispose of used batteries as specified by the local

authorities.

• Do not leave the remote control in a very hot and

humid place.

• Take care that no foreign objects enter inside the

remote control when you, for example, replace the

battery.

• Incorrect use of the battery may cause leaking and

corrosion.

– Do not recharge the battery.

– When the remote control will not be used for a

long period of time, remove the battery from the

remote control to prevent leaking and corrosion.

– Incorrectly inserting, shorting, dismantling, or

heating the battery, or throwing it into a fire

may cause the battery to rupture and leak.

About descriptions in this

manual

The operations described in this manual are

based on remote control operation. When an

operation is performed differently with the

remote control and buttons on photo frame, it

will be explained in a tip.

Connecting to the AC

power source

1 Insert the plug of the AC adaptor

into the DC IN 8.4 V jack on the rear

of the photo frame.

2 Connect the AC power cord to the

AC adaptor and the wall outlet.

Notes

• A socket outlet should be as close as possible to unit

and easily accessible.

• Do not place the photo frame in an unsteady

location such as on an uneven table or tilted surface.

• Connect the AC adaptor to an easily accessible wall

outlet close by. If trouble occurs while using the

adaptor, immediately shut off the power by

disconnecting the plug from the wall outlet.

• Do not short the plug of the AC adaptor with a

metal object. Doing so may cause a malfunction.

• Do not use the AC Adaptor placed in a narrow

space, such as between a wall and furniture.

• After use, remove the AC adaptor from the

DC IN 8.4 V jack of the photo frame, and remove

the AC power cord from the outlet.

AC adaptor

To wall outlet

Plug

Continued

18

GB

To use your photo frame abroad

- Power sources

You can use your photo frame and the AC

Adaptor (supplied) in any country or region

where the power supply is within 100 V to

240 V AC, 50/60 Hz. Use a commercially

available AC plug adaptor [a], if necessary,

depending on the wall outlet (wall socket) [b].

Do not use an electronics transformer (travel

converter), as this may cause a malfunction.

Setting the stand

Opening the stand

Set the photo frame with opening the stand as

below.

Setting to portrait or landscape

orientation

You can set the photo frame to portrait or

landscape orientation by rotating it without

moving the stand.

AC-L200

19

GB

Basic operations

When the photo frame is placed in the portrait

orientation, the image is also automatically

rotated to its proper orientation.

Notes

• Close the stand when you carry the photo frame.

• Check whether the stand is stable. If the stand is not

set properly, the photo frame may fall over.

• When the photo frame is rotated to the portrait

orientation, the menu, image information and index

display are not rotated.

Turning the photo frame

on

Turning on the power

Press 1 (on/standby) on the photo frame or

remote control to turn on the power, and the

standby indicator turns into green from red.

Note

The standby indicator lights red, when you connect

the AC adaptor to the photo frame.

Turning off the power

Hold 1 (on/standby) on the photo frame or

remote control until turning off the power. The

standby indicator turns into red from green.

Note

Do not disconnect the AC adaptor from the photo

frame before the standby indicator turns into red.

Doing so may damage the photo frame.

Continued

20

GB

Operations in an initial state

When the photo frame is turned on without a

memory card connected, the initial display

below appears on the screen.

When the photo frame is not operated for 10

seconds, demo mode is displayed. If any other

button than the power button is pressed, the

screen returns to initial display.

First, press MENU during initial display, and

then set the date and time.

Setting the clock

The clock of the photo frame needs to be

adjusted in order to display an accurate time in

the clock and calendar view modes.

1 Press MENU on the remote control.

The menu screen is displayed.

2 Press v/V to select [Various

settings] and then press to

display the Various settings screen.

3 Press

v

/V

to select [Date/time

settings] and then press .

The Date/time settings screen is displayed.

4 Select the format of the date.

1Press

v

/V

to select [Date Display Order]

and then press

.

2Press v/V

to select a format and then

press

.

•Y/M/D

• M/D/Y

•D/M/Y

5

Adjust the date.

1Press v/V to select [Date] and then

press .

2Press v/V to select a value and then

press .

6

Adjust the time.

1Press v/V to select [Time] and then

press .

2Press v/V to select a value and then

press .

Page is loading ...

Sony DPF-V700 Operating instructions

This manual is also suitable for

Sony DPF-V700 Operating instructions

Related papers

Other documents