TP-LINK HS100 KIT User manual

Type
User manual

This manual is also suitable for

Quick Start Guide
HS1XX Series
Smart Wi-Fi Plug Installation
Support
Create Account
Skip
Forgot password?
LOG IN
Password
Email
Log in to access your devices.
Welcome
Sketch 9:41 AM 100%
OR scan
QR code
1 Download TP-LINK Kasa from App Store or
Google Play.
2 Connect mobile device to your 2.4GHz Wi-Fi
network.
3 Launch Kasa and follow the in-app instructions
to connect the Smart Plug to your network.
Note: The Smart Plug only supports 2.4GHz networks.
If you encounter any issues during installation or
configuration, please visit www.tp-link.com/support for
web support and troubleshooting information.
7106506290 REV 1.0.2
Sketch 9:41 AM 100%
Power up your Smart Plug
Plug in your Smart Plug.
The Wi-Fi light will turn solid amber.
NEXT
Sketch 9:41 AM 100%
DONE
Great!
Your Smart Plug is all set up. It is
now saved in your Device List.
Smart Wi-Fi Plug
Troubleshooting
Press and hold (for 5 seconds) until the Wi-Fi
LED blinks amber and green alternately to
initiate the App-Config process.
Press and hold (for 10 seconds) until the Wi-Fi
LED blinks amber rapidly to factory reset the
Smart Plug.
Blinking Amber and Green: App-Config mode
initiated.
Quick Blinking Green: Connecting to the
network.
Solid Green: Connected to the network.
Quick Blinking Amber: Factory reset.
Solid Amber: Rebooting.
Solid Red: No network connection.
Solid Green: The Smart Plug is switched on.
Off: The Smart Plug is switched off.
1. What devices can I control with the Smart Plug?
You can control lights, fans, humidifiers, portable heaters, and
any small appliances in accordance with the Smart Plug’s
specifications.
2. What should I do when I cant turn devices on or off?
Make sure the devices connected to the Smart Plug are
turned on.
Make sure your mobile device and the Smart Plug are
connected to the same network.
3. What should I do when the Wi-Fi LED is lit solid red?
A solid red indicates no network connection, or that the
App-Config process has failed. You can:
Check your network connectivity.
Check for Wi-Fi interference or relocate the Smart Plug to
another location within the signal range.
Repeat the App-Config process.
Factory reset the Smart Plug and try to add it again.
4. How do I pair the Smart Plugs with Amazon Echo?
Visit www.tp-link.com/en/faq-944.html for pairing instructions.
© 2016 TP-LINK. All rights reserved.
  • Page 1 1
  • Page 2 2

TP-LINK HS100 KIT User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI