Frigidaire PLHT189CSK User guide

Category
Fridge-freezers
Type
User guide
P/N 241694400 (0106)
READ AND SAVE THESE INSTRUCTIONS
Use & Care Manual
Refrigerator
Top Mount
Welcome 2
3
6 - 9
4 - 5
9
9 - 10
10 - 12
12 - 13
13
15 - 16
14
17
18
Safety Instructions
Installation -- Includes Connecting
Optional Ice Maker To Water Supply
Do r
Removal & Reversal
o
Features at a Glance
Temperature Controls
Looking Inside
Ice Service
Food Storage
& Energy Saving Tips
Care & Cleaning
Normal Operating Sounds
Warranty
Before You Call
Español
19
2
WELCOME & CONGRATULATIONS
Congratulations on your purchase of a new refrigerator! We
here at Electrolux Home Products, Inc. are very proud of our
product and we are completly committed to providing you with
the best service possible. Your satisfaction is our #1 priority.
Please read this Use & Care Manual very carefully. It contains
valuable information on how to properly maintain your new
refrigerator.
We know you’ll enjoy your new refrigerator and Thank You for
choosing our product. We hope you consider us for future
purchases.
PLEASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant to
cover every possible condition and situation that may occur.
Common sense and caution must be practiced when installing,
operating and maintaining any appliance.
Please record your model and serial numbers below for
future reference. This information is found on your serial
plate located inside the refrigerator compartment.
Questions?
1-800-944-9044
(United States)
1-800-265-8352
(Canada)
PLEASE COMPLETE AND MAIL IN THE
PRODUCT
REGISTRATION CARD
INCLUDED WITH YOUR
REFRIGERATOR.
Please attach sales receipt
here for future reference.
Extend Your Warranty Protection
With An
Extended Service Contract
CALL 1-800-944-9044
To Enjoy These Benefits:
Total freedom from repair bills so
unexpected repairs won’t upset your budget.
Fast, convenient toll-free service is just a
phone call away.
Top-quality repairs by factory-trained experts.
Quick access to genuine replacement parts
so you can rest assured your refrigerator is
repaired with the proper components.
NOTENOTE
NOTENOTE
NOTE
Use only soap and water to clean serial plate.
Model Number:
Serial Number:
Purchase Date:
3
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR SAFETY
Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
Do not operate the refrigerator in the presense of
explosive fumes.
Avoid contact with any moving parts of automatic ice
maker.
Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.
PROPER DISPOSAL OF YOUR REFRIGERATOR OR
FREEZER
Risk of child entrapment
Child entrapment and
suffocation are not problems of
the past. Junked or abondoned
refrigerators or freezers are still
dangerous – even if they will sit
for “just a few days.” If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.
Before you throw away your old refrigerator/ freezer:
Remove doors.
Leave shelves in place so children may not easily climb
inside.
Have refrigerant removed by a qualified service
technician.
ELECTRICAL INFORMATION
The refrigerator must be plugged into its own dedicated
115 Volt, 60 Hz., AC only electric outlet. The power cord
of the appliance is equipped with a three-prong grounding
plug for your protection against electrical shock hazards. It
must be plugged directly into a properly grounded three-
prong receptacle. The receptacle must be installed in
accordance with local codes and ordinances. Consult a
qualified electrician. Do not use an extension cord or
adapter plug.
If the power cord is damaged, it should be replaced by the
manufacturer, service technician or a qualified person to
prevent any risk.
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by 10%
or more. Operating the refrigerator with insufficient power
can damage the compressor. Such damage is not covered
under your warranty.
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault Interruptor
(GFI) circuit.
WARNING WARNING
WARNING WARNING
WARNING
Please Read All Instructions Before Using This
Refrigerator.
WARNING WARNING
WARNING WARNING
WARNING
These Guidelines Must Be Followed To Ensure That Safety
Mechanisms In This Refrigerator Will Operate Properly.
IMPORTANT
Turning the Freezer and
Fresh Food Controls to “0”
turns off the compressor
and prevents your
refrigerator from cooling,
but does not disconnect the
power to the light bulb and
other electrical
components. To turn off
power to your refrigerator
you must unplug the power
cord from the wall outlet.
4
INSTALLATION
This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
2. Use flat-blade screwdriver
or 3/8” socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
Raise
Adjustable Front Roller
(some models)
Stationary Front Roller
with Leveling Screw
(some models)
CAUTION CAUTION
CAUTION CAUTION
CAUTION
Do Not install the refrigerator where the temperature will
drop below 55°F (13°C) or rise above 110°F (43°C). The
compressor will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
Installation Clearances
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8”
Back 1”
NOTENOTE
NOTENOTE
NOTE
If you see black coils/tubing on the back of your refrigerator
(air-cooled condenser) leave 3” clearance at top of
refrigerator.
DOOR OPENING
NOTENOTE
NOTENOTE
NOTE
If your refrigerator is placed with the door hinge side against
a wall, you may have to allow additional space so the door
can be opened wider.
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See
Door
Removal & Reversal Instructions
.
NOTENOTE
NOTENOTE
NOTE
Raise the front of the refrigerator enough so the doors close
freely when opened halfway. The refrigerator should slope ¼”
to ½” from front to back. Then level the refrigerator from side
to side.
To Level Your Refrigerator:
1. Remove toe grille.
5
INSTALLATION - CONNECTING ICE MAKER TO WATER SUPPLY
Before Installing The Water Supply Line, You Will Need
Basic Tools: adjustable wrench, flat-blade screwdriver,
and Phillips
TM
screwdriver
Access to a household cold water line with water pressure
between 30 and 100 psi.
A water supply line made of ¼ inch (6.4 mm) OD, copper
tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker
inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your
household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the
water supply line to the ice maker inlet valve.
To Connect Water Supply Line To Ice Maker Inlet Valve
1. Disconnect refrigerator from electric power source.
2. Place end of water supply line into sink or bucket. Turn ON
water supply and flush supply line until water is clear. Turn
OFF water supply at shutoff valve.
3. Unscrew plastic cap from water valve inlet and discard
cap.
4. Slide brass compression nut, then ferrule (sleeve) onto
water supply line, as shown.
5. Push water supply line into water valve inlet as far as it
will go (¼ inch). Slide ferrule (sleeve) into valve inlet and
finger tighten compression nut onto valve. Tighten another
half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to
rear panel of refrigerator as shown.
7. Coil excess water supply line (about 2½ turns) behind
refrigerator as shown and arrange coils so they do not
vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any
connections that leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (see ice
maker front cover for ON/OFF position of arm).
IMPORTANT
Ensure that your water supply line connections comply with
all local plumbing codes.
NOTENOTE
NOTENOTE
NOTE
Water line kit number 5303917950, available from your
appliance dealer at additional cost, contains 25 feet (7.6
meters) of ¼ inch OD copper tubing, a saddle type shutoff
valve (nonpiercing), (2) ¼ inch brass compression nuts, (2)
ferrules/sleeves, and instructions for installing a water supply
line.
IMPORTANT
It takes approximately 24 hours for the ice maker to begin
producing ice. Air in new plumbing lines may cause ice
maker to cycle two or three times before making a full tray of
ice. New plumbing may cause ice to be discolored or have
poor flavor. Discard ice made during the first 24 hours.
WARNING WARNING
WARNING WARNING
WARNING
To avoid electric shock, which can cause death or severe
personal injury, disconnect the refrigerator from electrical
power before connecting a water supply line to the
refrigerator.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
To Avoid Property Damage:
Copper tubing is recommended for the water supply
line. Water supply tubing made of ¼” plastic is not
recommended since it greatly increases the potential
for water leaks. Manufacturer will not be responsible
for any damage if plastic tubing is used for supply
line.
DO NOT install water supply tubing in areas where
temperatures fall below freezing.
Chemicals from a malfunctioning softener can
damage the ice maker. If the ice maker is connected
to soft water, ensure that the softener is maintained
and working properly.
6
DOOR REMOVAL / REVERSAL INSTRUCTIONS
1. Remove toe grille.
2. Remove top hinge with 3/8” hex driver and lift freezer door off of center
hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to slide out.
Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside
screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8” socket wrench.
8. Install bottom hinge on opposite side with the two screws removed from
step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to
other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instructions on next page).
11. Move freezer and refrigerator door stops to opposite side. Before starting
screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin
through center hinge into top of door. Close refrigerator door to help align
hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
17. Replace toe grille.
18. Plug in electrical power cord and turn refrigerator temperature control to
center position. Adjust setting as necessary.
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTENOTE
NOTENOTE
NOTE
If you have stainless steel doors -- go to the
Removing Stainless Steel Doors
and Handles
Section on page 8.
The direction in which your refrigerator doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one
side to the other. Reversing the door swing should be performed by a
qualified person.
IMPORTANT
Before you begin, turn the refrigerator temperature control to “0” and remove
the electrical power cord from the wall outlet. Remove any food from door
shelves.
7
DOOR REMOVAL / REVERSAL INSTRUCTIONS
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove short trim piece by sliding trim straight up and off
of handle bracket.
3. Remove screw attaching top of handle to door.
4. Magnetic Nameplate Models: Gently pry magnetic
nameplate frame from door. Remove nameplate from its
frame, turn frame upside down and install in old handle
holes. Insert magnetic nameplate into frame.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, using the same holes as nameplate.
4. Magnetic Nameplate Models: Use putty knife to gently pry
magnetic nameplate frame from door. Remove nameplate
from its frame, turn frame upside down and install in old
handle holes. Insert magnetic nameplate into frame.
Self-Adhesive Nameplate Models: Use putty knife to
gently peel off nameplate from door and reapply over old
handle holes.
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer
door.
2. Remove button plug using edge of putty knife.
3. Remove screw on side of freezer door and remove
handle.
NOTENOTE
NOTENOTE
NOTE
Some models have “pocket” handles, which are recessed
into the sides of the door. On these models, only the hinges
will need to be reversed.
Self-Adhesive
Nameplate Models:
Gently peel off
nameplate from door
and reapply over old
handle holes.
TO ATTACH FREEZER
HANDLE:
1. Reinstall handle on
opposite side, using
same hole as
nameplate.
2. Attach handle to
bottom of door.
3. Slide trim piece
straight down onto
handle bracket.
NOTENOTE
NOTENOTE
NOTE
To remove freezer handle, refer to figure 3 on page 9.
TO ATTACH FREEZER
HANDLE:
1. Secure side of
handle to door and
replace button plug.
2. Secure handle to
bottom of door.
TO ATTACH FREEZER
HANDLE:
1. Start with handle
offset away from
door. Place top of
handle over dovetail
button, swing handle
into an upright
position and pull
downward, locking it
into place.
2. Secure bottom of
handle with two
screws removed
earlier.
TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket (Figure 1) or fits around the base of the handle (Figure
2). An adhesive “trim lock” is positioned about halfway down.
The bottom of the trim is held in place by either an adhesive
trim lock, or a trim lock with two prongs inserted into a hole on
the face of the door.
TO REMOVE TRIM:
1. Remove trim by gently pulling trim lock areas out and
away from door.
2. When trim is free from door, slide the trim straight down
and away from base of handle.
NOTENOTE
NOTENOTE
NOTE
For models with short handle trim, remove by sliding trim
straight down and off of handle bracket.
8
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)
Figure 1 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
2. Remove screw attaching bottom of handle to door.
3. Remove two hole plugs and hinge pin plug on top of door
and install on opposite side. Use Phillips head screwdriver
to remove plastic screw plug from front of door and install
on opposite side
Figure 2 Style Handles
1. Remove two screws attaching handle to top of refrigerator
door.
2. Swing top of handle away from door and slide handle
down and off of dovetail button.
3. Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding holes to
opposite side.
TO ATTACH REFRIGERATOR HANDLE:
Figure 1 Style Handles
1. Secure bottom of handle with screws.
2. Secure top of handle with screws.
Figure 2 Style Handles
1. Start with handle offset away from door. Place bottom of
handle over dovetail button, swing handle into an upright
position and pull upward, locking it into place.
2. Secure top of handle with screws.
DOOR REMOVAL / REVERSAL INSTRUCTIONS
Figure 1
Figure 2
NOTENOTE
NOTENOTE
NOTE
Trim lock must be removed and installed by sliding over the
two donut shaped areas.
TO ATTACH TRIM:
1. Slide both trim locks out of trim.
2. Insert new adhesive trim locks contained in your literature
pack.
3. Install trim to handle by sliding under base of handle.
Carefully align trim and press down at trim lock locations.
4. Use rubbing alcohol to remove any adhesive residue from
old trim lock locations.
TO REMOVE REFRIGERATOR HANDLE:
Figure 3 - Handle Reversal
Refrigerator Door Without Trim
TO ATTACH
REFRIGERATOR HANDLE:
1. Secure side of handle to
door and replace plug
button.
2. Secure handle to top of
door.
(Handles may be easier to
reverse while doors are off.)
1. Remove two screws
attaching handle to top of
refrigerator door.
2. Remove button plug
using edge of putty knife.
3. Remove screw on side of
refrigerator door and
remove handle.
4. Reverse freezer and
refrigerator handles as
shown in figure 3.
REMOVING STAINLESS STEEL DOORS AND HANDLES
To Remove Doors
Stainless steel doors are not reversible. Follow these steps to
remove doors.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
Use care when using tools near surface of stainless steel
doors to avoid scratching.
Typical Handle
1. Remove toe grille and
top hinge cover.
2. Remove top hinge and
lift freezer door off of
center hinge pin. Set
door aside.
3. Unscrew center hinge
pin using adjustable
wrench and save for
reassembly. Ensure
plastic washer stays on
hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside
screw and loosening two outside screws enough to allow
hinge to slide out. (continued on next page)
9
DOOR REMOVAL / REVERSAL INSTRUCTIONS
6. Remove bottom hinge. Reinsert two outside screws in
holes and tighten.
7. Reverse steps 1 - 6 to reinstall doors
To Remove Handles
1. Firmly hold freezer handle while loosening set screws
with 3/32” allen wrench. Remove freezer handle.
2. Repeat step 1 for refrigerator door.
FEATURES AT A GLANCE
Door Rack
Fixed Door Bin
Door Bin
Snugger
Tall Bottle
Retainer
Fixed Door Bin
Door Rack
Dairy Door
Crisper
Drawers
Full Shelf
Wine Rack
Half Shelf
Deli Drawer
Refrigerator
Control
Ice Bucket
Ice Tray
Ice Maker
Freezer Light
Toe Grille
Crisper Cover
Mid Level Light
Deli Drawer
Cover
Freezer
Control
Freezer Shelf
Special Item Rack
Features may vary
according to model
TEMPERATURE CONTROLS
COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate
with the doors closed for at least 8 to 12 hours before loading
it with food.
REFRIGERATOR & FREEZER CONTROLS
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
For colder temperatures, turn the knob towards Colder.
For warmer temperatures, turn the knob towards Cold.
Turning the refrigerator control will change temperatures in
both compartments. For example, if the refrigerator control is
turned to a colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer control will
change only the freezer temperature.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good circulation,
do not block cold air vents with food items.
NOTENOTE
NOTENOTE
NOTE
When changing control settings, wait 24 hours before
making additional adjustments.
TEMPERATURE ADJUSTMENT
NOTENOTE
NOTENOTE
NOTE
When first turning refrigerator on, move refrigerator and
freezer controls to W which is the recommended initial
setting. After 24 hours, adjust the controls as needed.
10
TEMPERATURE CONTROLS (CONTINUED)
Freezer Control (some models)
Refrigerator Control (some models)
Refrigerator & Freezer Control (some models)
* IMPORTANT
Turning the refrigerator temperature control to “0”
turns off the compressor, but does not disconnect
the power to the light bulb and other electrical
components. To turn off power to your refrigerator,
you must unplug the power cord from the wall outlet.
EDIUGTNEMTSUJDAERUTAREPMET
mraWooTsItnemtrapmocrotaregirfeRfI
sdrawoTylthgilSlortnoCrotaregirfeRnruT redloC .
dloCooTsItnemtrapmocro
taregirfeRfI
sdrawoTylthgilSlortnoCrotaregirfeRnruT dloC .
mraWooTsItnemtrapmocrezeerFfI
sdrawoTylthgilSlo
rtnoCrezeerFnruT redloC .
dloCooTsItnemtrapmocrezeerFfI
sdrawoTylthgilSlortnoCrezeerFnruT dloC .
ffOrotaregi
rfeRnruToT*
oTlortnoCrotaregirfeRnruT 0.
LOOKING INSIDE
Sliding Wire Shelf
Sliding Glass Shelf
CAUTION CAUTION
CAUTION CAUTION
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden temperature change.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
1 Remove shelf by pulling forward to stop position.
2 Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this procedure.
11
Full Width Cantilever
Glass Shelf
Cantilever Glass Shelf
Fixed and Sliding
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items can be
quickly selected.
Door Rack
Some models have door
racks or bins that can
accommodate gallon-sized
plastic drink containers and
economy-sized jars and
containers. Some racks are
adjustable for maximum
storage capacity.
The dairy compartment,
which is warmer than the
general food storage section,
is intended for short term
storage of cheese, spreads,
or butter.
LOOKING INSIDE (CONTINUED)
To adjust cantilever shelves:
NOTENOTE
NOTENOTE
NOTE
Cantilever shelves are supported at the back of the
refrigerator. Cantilever shelves are available in either glass
or wire.
1 Lift front edge up.
2 Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
SpillSafe
TM
glass shelves (some models) catch and hold
accidental spills. In some models, the
SpillSafe
TM
shelves slide
out for easy access to food and for fast cleaning. The shelves
slide out independently of the cantilever brackets. Just pull the
front of the shelf forward. The shelf can be extended as far as
the stopper will allow but it is not removable from the cantilever
bracket.
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to
suit individual needs.
To move door bins
Adjustable
Door Bin
1. Lift bin straight up.
2. Remove bin.
3. Place bin in desired
position.
4. Lower bin onto supports
until locked in place.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from
falling forward when opening or closing the refrigerator door.
To install, hold the retainer at the top, and slide it over the
outside wall of the bin, as shown in the diagram. The Tall Bottle
Retainer works best with a Bin Snugger.
Tall Bottle Retainer (left) and Bin Snugger (right)
SPECIAL ITEM RACK (SOME MODELS)
Special Item Rack
The innovative design of the
Special Item Rack allows you
to store a six-pack of 12 ounce
drink cans, a bottle of wine, a
two-liter soft drink bottle, or a
carton of eggs. The Special
Item Rack mounts on the left
side of your refrigerator. To
install, just slide the Special
Item Rack onto any shelf as
shown in the drawing.
CRISPERS (SOME MODELS)
Crisper Drawer
The crispers, located under
the bottom refrigerator shelf,
are designed for storing fruits,
vegetables, and other fresh
produce. Wash items in clear
water and remove excess
water before placing them in
the crispers. Items with strong
odors or high moisture content
should be wrapped before
storing.
12
LOOKING INSIDE (CONTINUED)
HUMIDITY CONTROL
(SOME MODELS)
Crisper Humidity Control
DELI DRAWER (SOME
MODELS)
Some models are equipped
with a Deli Drawer for storage
of luncheon meats, spreads,
cheeses, and other deli items.
Deli Drawer
WINE RACK (SOME
MODELS)
The Wine Rack stores bottles
of wine, or single two-liter
plastic bottles of juice or soda
pop. To install, slide the Wine
Rack onto the shelf with the
curve facing in. To remove,
slide the Wine Rack out.
Install on either side of shelf.
Wine Rack
NOTENOTE
NOTENOTE
NOTE
Leafy vegetables keep best when stored with the Humidity
Control set on High Humidity, or in a drawer without a
Humidity Control. This keeps incoming air to a minimum and
maintains maximum moisture content.
The Humidity Control,
present on some models
with crisper drawers, allows
you to adjust the humidity
within the crisper. This can
extend the life of fresh
vegetables that keep best in
high humidity.
ICE SERVICE
If your refrigerator has an automatic ice maker, it will provide a
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, however, no ice will be produced during
the first 24 hours of operation. Automatic ice makers are also
optional accessories that may be installed in most models at
any time. Call your local dealer for information.
The ice maker produces 2 to 5 pounds of ice every 24 hours
depending on usage conditions. Ice is produced at a rate of 8
cubes every 80 to 160 minutes.
TURNING YOUR ICE MAKER ON
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its “down” or ON position. New plumbing
connections may cause the first production of ice cubes to be
discolored or have an odd flavor. These first cubes should be
discarded until the cubes produced are free of discoloration
and taste.
TURNING YOUR ICE MAKER OFF
IMPORTANT
Your ice maker is shipped with the wire signal arm in the ON
position. To ensure proper function of your ice maker, hook
up water supply immediately or turn ice maker OFF by lifting
the wire signal arm until it clicks and locks in the UP position.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
Chemicals from a malfunctioning softener can damage
the ice maker. If the ice maker is connected to soft water,
ensure that the softener is maintained and working
properly.
Ice
Maker
To stop the ice maker, lift the
wire signal arm until it clicks
and locks in the “up” or OFF
position. The ice maker also
turns off automatically when
the ice container is full. If your
model has an adjustable
freezer shelf, place the shelf in
the lower position, so that the
wire signal arm will hit the ice
when the container is full.
ICE MAKER TIPS
Ice cubes stored too long may develop an odd flavor.
Empty the ice container and ensure that the wire signal
arm is in its “down” or ON position. The ice maker will then
produce more ice.
Occasionally shake the ice container to keep ice
separated.
Keep the wire signal arm in its “up” or OFF position until
the refrigerator is connected to the water supply or
whenever the water supply is turned off.
The following sounds are normal when the ice maker is
operating:
Motor running
Ice loosening from tray
Ice dropping into ice container
Running water
Water valve opening or closing
13
ICE SERVICE (CONTINUED)
Wash the ice container in warm water with mild detergent.
Rinse well and dry.
Stop the ice maker when cleaning the freezer and during
vacations.
If the ice maker will be turned off for a long period of time,
turn the water supply valve to the closed position.
NOTENOTE
NOTENOTE
NOTE
For more information on these operations, see
Normal
Operating Sounds and Sights
section on page 17.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
Do Not place the ice container in your dishwasher.
FOOD STORAGE & ENERGY SAVING IDEAS
FOOD STORAGE IDEAS
Fresh Food Storage
The fresh food compartment should be kept between 34°F
and 40° F with an optimum temperature of 37° F.
Avoid overcrowding the refrigerator shelves. This reduces
the circulation of air around the food and results in uneven
cooling.
Fruits and Vegetables
Storage in the crisper drawers traps moisture to help
preserve the fruit and vegetable quality for longer time
periods.
Meat
Raw meat and poultry should be wrapped securely so
leakage and contamination of other foods or surfaces
does not occur.
Frozen Food Storage
The freezer compartment should be kept at 0° F or lower.
A freezer operates most efficiently when it is at least 2/3
full.
Packaging Foods for Freezing
To minimize dehydration and quality deterioration, use
aluminum foil, freezer wrap, freezer bags or airtight
containers. Force as much air out of the packages as
possible and seal them tightly. Trapped air can cause food
to dry out, change color, and develop an off-flavor (freezer
burn).
Wrap fresh meats and poultry with suitable freezer wrap
prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
Avoid adding too much warm food to the freezer at one
time. This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods.
Leave a space between the packages, so cold air can
circulate freely, allowing food to freeze as quickly as
possible.
Avoid storing hard-to-freeze foods such as ice cream and
orange juice on the freezer door shelves. These foods are
best stored in the freezer interior where the temperature
varies less.
ENERGY SAVING IDEAS
Locate the refrigerator in the coolest
part of the room, out of direct
sunlight, and away from heating
ducts or registers. Do not place the
refrigerator next to heat-producing
appliances such as a range, oven,
or dishwasher. If this is not possible,
a section of cabinetry or an added
layer of insulation between the two appliances will help
the refrigerator operate more efficiently.
Level the refrigerator so that the doors close tightly.
Refer to this Use & Care Manual for the suggested
temperature control settings.
Periodic cleaning of the condenser will help the
refrigerator run more efficiently. See the
Care and
Cleaning Chart
on page 15.
Do not overcrowd the refrigerator or block cold air vents.
Doing so causes the refrigerator to run longer and use
more energy.
Cover foods and wipe containers dry before placing them
in the refrigerator. This cuts down on moisture build-up
inside the unit.
Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and close
the door as soon as possible.
14
NORMAL OPERATING SOUNDS & SIGHTS
UNDERSTANDING THE SOUNDS YOU MAY HEAR
Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will become
familiar to you. They also indicate your refrigerator is operating
as designed. Hard surfaces, such as vinyl or wood floors,
walls, and kitchen cabinets may make sounds more
noticeable. Listed below are descriptions of some of the most
common sounds you may hear, and what is causing them.
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
B. Evaporator Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
C. Defrost Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
D. Automatic Ice Maker
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
E. Cold Control & Defrost Timer or Automatic
Defrost Control
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
F. Condenser Fan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H. Water Valve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
I. Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser Coils (Fan-cooled models only)
NOTENOTE
NOTENOTE
NOTE
Rigid foam insulation is very energy efficient, but is not a
sound insulator.
IMPORTANT
During the automatic defrost cycle, you may notice a red
glow in the vents on the back wall of your freezer
compartment. This is normal during the defrost cycle.
15
CARE & CLEANING
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at
least twice a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface.
Do not wash any removable parts in a dishwasher.
Always unplug the electrical power cord from the wall outlet before
cleaning.
Care & Cleaning Chart
Part What To Use Tips and Precautions
Interior/Door
Liner
Soap and water
Baking soda and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
Door Gaskets
Soap and water
Wipe gaskets with a clean soft cloth.
Drawers/Bins
Soap and water
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass Shelves
Soap and water
Glass cleaner
Mild liquid sprays
Allow glass to warm to room temperature before immersing in warm water.
Toe Grille
Soap and water
Mild liquid sprays
Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille (See illustration on
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
Exterior and
Handles
Soap and water
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles.
Exterior and
Handles
(Stainless Steel
Models Only)
Soap and water
Ammonia
Stainless Steel Cleaners
Never use CHLORIDE to clean stainless steel.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
Condenser
Coils
(Fan-cooled
models only)
Condenser Cleaning
Brush is available from
your dealer.
Vacuum Cleaner
No need to clean unless operating refrigerator under particularly dusty or
greasy conditions, or if there is significant pet traffic in your home. If cleaning
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item “J” in illustration on page 14 for location).
Condenser
Coils
(Air-cooled
models only)
Vacuum Cleaner
Use the dusting tool attachment on your vacuum to remove dust build-up on
the condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.
Defrost Water
Pan
Soap and water
Some models have defrost water pan located on top of compressor at bottom
rear of refrigerator (see illustration on next page). Wipe water pan with damp
cloth. NOTE: The defrost water pan is NOT removable.
CAUTION CAUTION
CAUTION CAUTION
CAUTION
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may tear or
gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to move the refrigerator
beyond the plumbing connections.
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
Never use CHLORIDE to clean stainless steel.
NOTENOTE
NOTENOTE
NOTE
Turning the refrigerator temperature control to 0 turns off the compressor, but does not disconnect electrical power to the
light bulb or other electrical components. To turn off power to your refrigerator, you must unplug the power cord from the
wall outlet.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing adhesive
labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild detergent, or, touch the glue
residue with the sticky side of tape you have already removed. Do not remove the serial plate.
16
CARE & CLEANING (CONTINUED)
NEVER CLEAN CONDENSER (SOME MODELS)
If your refrigerator is
equipped with a
Never Clean
condenser, there’s
no need to clean the
condenser under
normal operating
conditions. If the
refrigerator is
operated under
particularly dusty or
greasy conditions, or
if there is significant
pet traffic in your
home, it may be necessary to periodically clean the condenser
for maximum efficiency.
Vacation and Moving Tips
Short
Vacations
Leave refrigerator operating during vacations of 3 weeks or less.
Use all perishable items from refrigerator compartment.
Turn automatic ice maker off and empty ice bucket, even if you will only be gone for a
few days.
Long
Vacations
Remove all food and ice if you will be gone one month or more.
Turn controls to "O" ( the OFF position) and disconnect power.
Turn off automatic ice maker and turn water supply valve to closed position.
Clean interior thoroughly.
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
Moving
Remove all food and ice.
If using handcart, load from side.
Adjust rollers all the way up to protect them during sliding or moving.
Pad cabinet to avoid scratching surface.
Freezer Light Cover Removal
Refrigerator Mid-Level Light Cover Removal
REPLACING THE FREEZER LIGHT BULB (SOME
MODELS)
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Unsnap light shield as shown.
4. Unscrew and replace old bulb with an appliance bulb of
the same wattage.
5. Replace light shield.
6. Remember to plug the refrigerator back in.
Defrost Water Pan (some models)
CAUTION CAUTION
CAUTION CAUTION
CAUTION
Avoid cuts when replacing light bulbs, wear gloves.
17
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to
be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased "as-is" are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc.,which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.
ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN
LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
Exclusions
If You Need
Service
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada
Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and
parts under this warranty must be performed by Electrolux or an authorized service company. Product features or
specifications as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta, GA 30907
Canada
1.800.668.4606
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
Major Appliance Warranty Information
18
BEFORE YOU CALL
ATTENTION
To Properly Install Your Refrigerator
See “Installation” Section On Pages 4-5
OR
To Reverse The Doors
See “Door Removal & Reversal” Section On Pages 6-9
Common
Occurrences
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workmanship
or materials in this appliance.
Refrigerator does not run.
Ensure plug is tightly pushed into electrical outlet.
Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
The temperature control is turned to "O".
Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Freezer temperature too cold.
Refrigerator temperature is
satisfactory.
Set freezer control to a warmer setting until freezer temperature is satisfactory.
Allow 24 hours for the temperature to stabilize.
Refrigerator temperature too cold.
Freezer temperature is satisfactory.
Set refrigerator control to a warmer setting. Allow 24 hours for temperature to
stabilize. Then check freezer temperatures and adjust as needed.
* Refrigerator is noisy or vibrates.
The cabinet is not level.
Floor is weak.
Odors in refrigerator.
Interior needs to be cleaned.
Foods that produce odors should be covered or wrapped.
Cabinet light not working.
Replace light bulb.
Ensure plug is tightly pushed into electrical outlet.
Light switch may be stuck. Push in light switch, located on the refrigerator
control box, to release.
Automatic ice maker not working.
(some models)
Ensure the Wire Signal Arm is not in UP position.
Ice maker should produce 4 to 5 pounds of ice in a 24 hour period.
Water supply is turned off.
Water pressure is too low.
The freezer is not cold enough.
* See Normal Operating Sounds and Sights section on page 14.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Frigidaire PLHT189CSK User guide

Category
Fridge-freezers
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI