2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical controls
  5. Electrical timers
  6. FireMagic
  7. 3092A
3092A

FireMagic 3092A, Model 3092A Auto Shut-off 1-Hour Timer User manual

  • Hello! I am an AI chatbot trained to assist you with the FireMagic 3092A User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • Where should the timer be installed?
    How far away from the grill should the timer be placed?
    How do I use the timer?
    What happens when the timer reaches the set shut-off time?
    Can the timer be used for periods less than one hour?
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
Fig. 1-1
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
Fig. 1-1
Fit the Automatic Grill Shut-Off Timer in the gas supply line before
the grill. The timer accommodates
1
/2" NPT piping (both ends).
Important: Ensure you connect the gas supply to the
side marked “IN” on the timer (see photo). It
MUST NOT be fi tted within 18" of the grill, or
it will overheat, causing damage to the timer
and may result in a leak.
Use pipe joint compound on male fi ttings attached to the timer.
To use, set the dial (turn clockwise) to the desired time to shut
off. The dial is marked in 3 one hour increments (any position
in between is an estimate of that hour). The timer dial will auto
rotate (counter-clockwise) and will shut off the gas supply when
the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
one hour, you must fi rst set the dial to 1 hour (to
activate), then return (counter-clockwise) to the
desired amount of time. This will ensure proper
timer operation. See Fig. 1-1.
Fit the Automatic Grill Shut-Off Timer in the gas supply line before
the grill. The timer accommodates
1
/2" NPT piping (both ends).
Important: Ensure you connect the gas supply to the
side marked “IN” on the timer (see photo). It
MUST NOT be fi tted within 18" of the grill, or
it will overheat, causing damage to the timer
and may result in a leak.
Use pipe joint compound on male fi ttings attached to the timer.
To use, set the dial (turn clockwise) to the desired time to shut
off. The dial is marked in 3 one hour increments (any position
in between is an estimate of that hour). The timer dial will auto
rotate (counter-clockwise) and will shut off the gas supply when
the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
one hour, you must fi rst set the dial to 1 hour (to
activate), then return (counter-clockwise) to the
desired amount of time. This will ensure proper
timer operation. See Fig. 1-1.
L-C2-485
REV 0- 1508270830
L-C2-485
REV 0- 1508270830
Model # 3092A
Model # 3092A
AUTOMATIC GRILL SHUT-OFF
1-HOUR TIMER INSTRUCTIONS
Rated up to 100,000 BTUs /
Max temperature 125°F
AUTOMATIC GRILL SHUT-OFF
1-HOUR TIMER INSTRUCTIONS
Rated up to 100,000 BTUs /
Max temperature 125°F
Grill
side
Gas supply
side
Gas fl ow direction
(to grill)
Timer setting mark
(shown here in OFF)
To use, set the dial (turn clockwise) to the desired time to shut
off. The dial is marked in 3 twenty minute increments (any
position in between is an estimate of that set time). The timer
dial will auto rotate (counter-clockwise) and will shut off the gas
supply when the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
twenty minutes, you must fi rst set the dial to
20 minutes (to activate), then return (counter-
clockwise) to the desired amount of time. This
will ensure proper timer operation. See Fig. 1-1.
Turn past 20 minutes
to activate
Time settings: 20-60 minutes
To use, set the dial (turn clockwise) to the desired time to shut
off. The dial is marked in 3 twenty minute increments (any
position in between is an estimate of that set time). The timer
dial will auto rotate (counter-clockwise) and will shut off the gas
supply when the dial reaches OFF (i.e. the time is completed).
Important: When using the timer for periods of less than
twenty minutes, you must fi rst set the dial to
20 minutes (to activate), then return (counter-
clockwise) to the desired amount of time. This
will ensure proper timer operation. See Fig. 1-1.
Grill
side
Gas supply
side
Gas fl ow direction
(to grill)
Timer setting mark
(shown here in OFF)
Turn past 20 minutes
to activate
Time settings: 20-60 minutes
/