003
EN
Configuring camera settings
1. The setup menu is available in capture, video, and playback
mode.
2. Press the MENU button and select Setup then press OK to
enter, the submenu appears.
3. Use the Left/Right navigation buttons to scroll through the
options and press the OK button to enter further submenus and
to confirm your selection.
Setting the Date and Time.
1. Using the Left/Right navigation buttons to select from Year,
Month, Date, Hour, and Minute field.
2. Use the Up/Down navigation buttons to adjust the correct value.
3. Press the OK button to confirm.
Setting the Language
The Language option enables you to select the language of
your choice.
Capturing Photos, Recording
Videos / Audios
Setting the Capture/Video/Audio Mode
1. Press the SCENE button to select the capture/video/audio mode you need,and press the
OK button to enable the mode you select.
2. Press the Shutter button to capture a photograph, record a movie, or a voice clip.
Setting the Flash Mode
Press the Up/Flash /Delete navigation button repeatedly to cycle through flash
modes.
Anti-Shake Function
This function is available in Auto capture and Video mode. Press the OK / button to
enable the Anti-Shake function, and press again to disable it. An Anti-Shake icon
displays on the LCD screen when the function is activated.
FILE NO.
RESET
CONTINUE
DATE & TIME
2008 / 01 / 01 12 : 00
(Year)
Press ok when done
LANGUAGE
ENGLISH
DEUTSCH
FRAN
ç
AIS
ITALIANO