Page is loading ...
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Printed in China
AJL750_37_QSG_V1.0
Quick start guide
Connect
Setup
Enjoy
1
2
3
What’s in the box
User Manual
Quick Start Guide
Mounting Template
Connect
1
Remove the protective tab
1
Remove the protective tab to
activate the remote control battery.
A
VOL
DISPLAY
INFO
SETUP
FM PROG
CC
OK
AUDIO
PREV CH
FAV
LIST
RADIO
8
5
2
7
4
1
0
6
3
9
DBB
ATSC
MP
3
LINK CLOCK
TV OPTIONS
MUTE
CH
Connect power
B
1
Connect the AC power cord to the wall
outlet.
AJL750
Register your product and get support at
www.philips.com/welcome
AJL750_37_QSG_V1.0_EN.indd 2-4AJL750_37_QSG_V1.0_EN.indd 2-4 2010-3-2 16:21:062010-3-2 16:21:06
A
Note for product
C
Note for product
VOL
DISPLAY
INFO
SETUP
FM PROG
CC
OK
AUDIO
PREV CH
FAV
LIST
RADIO
8
5
2
7
4
1
0
6
3
9
DBB
ATSC
MP
3
LINK CLOCK
TV OPTIONS
MUTE
CH
Watch TV
Play from an external device
A
B
1
Press ATSC TV to enter TV mode.
»
[Atsc] (Atsc) is displayed.
»
First time installation is displayed on the TV
panel.
2
Press
/
to switch to an item.
3
Press
/
to select an option.
4
Select Air/Cable connecting.
»
Auto search starts.
»
All available TV channels will be searched
and stored.
1
Press PUSH at the bottom of the set to
release TV panel.
2
Pull down the panel.
3
Turn around the panel to face the rear of the
panel.
4
Open the door to get the MP3 link cable.
5
Connect the built-in MP3 link cable to the
headphone jack on an external device.
6
Press MP3 LINK to select the MP3 link
source.
»
[AUX IN] (AUX IN) is displayed for fi ve
seconds.
7
Start to play the device (see the device user
manual).
Enjoy
3
Enjoy
3
Tune to a radio station
C
1
Press RADIO to enter the FM mode.
2
Press CH +/- to select a preset radio station.
3
Press
/
repeatedly until you fi nd optimal
reception.
»
The preset number for other radio sta-
tions remain unchanged.
Connect
Setup
1
2
Connect TV antenna
Set time
Set the kitchen timer
C
A
B
1
Connect the antenna to the ANTENNA
jack.
1
In standby mode, press and hold CLOCK for
2 seconds.
»
The hour digits begin to blink.
2
Press
/
or TIMER/VOL to set the hour.
3
Press OK/
to confi rm.
»
The minute digits begin to blink.
4
Press
/
or TIMER/VOL to set the minute.
»
[12 HR] begins to blink.
5
Press
/
or TIMER/VOL to select the
12/24 hour format.
6
Press OK to confi rm.
1
At any operation mode, press TIMER /VOL
for two seconds.
»
The last time setting in minute or hour and
minute blinks.
2
Rotate the knob clockwise/counter-clockwise
to choose the desired timer.
3
Press TIMER /VOL to confi rm.
»
The timer is set and activated.
»
is displayed and the timer starts counting
down.
VOL
DISPLAY
INFO
SETUP
OK
FAV
LIST
RADIO
ATSC
MP
3
LINK CLOCK
TV OPTIONS
MUTE
CH
AJL750_37_QSG_V1.0_EN.indd 5-7AJL750_37_QSG_V1.0_EN.indd 5-7 2010-3-2 16:21:132010-3-2 16:21:13
/