Page is loading ...
DVR 794HDv4
Wi-Fi Action Camcorder
User Manual
© 2009-2016 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
1
CONTENTS
Introduction .................................................................................................................................. 3
What’s Included ............................................................................................................................ 4
Parts of the Camcorder ................................................................................................................ 5
Initial Camcorder Setup ................................................................................................................ 6
INSTALLING AND CHARGING THE BATTERY ........................................................................................................................................ 6
INSTALLING THE MICRO SD MEMORY CARD ..................................................................................................................................... 8
POWERING ON – OFF / ENERGY SAVE ............................................................................................................................................ 9
USING THE CAMCORDER ........................................................................................................................................................... 10
Main Camcorder Modes .............................................................................................................. 11
Camcorder Mounts and Accessories .......................................................................................... 13
WATERPROOF CASE ................................................................................................................................................................. 13
INSTALLING THE BICYCLE MOUNT ................................................................................................................................................ 14
INSTALLING THE HELMET MOUNTING SYSTEM ................................................................................................................................ 15
Using Your Action Camcorder .................................................................................................... 15
POWERING ON YOUR CAMCORDER .............................................................................................................................................. 15
CHANGING CAMCORDER MODE .................................................................................................................................................. 15
NAVIGATING THE MENUS .......................................................................................................................................................... 17
VIDEO CAPTURE – STANDARD MODE ........................................................................................................................................... 18
VIDEO CAPTURE – CAR CARRYING MODE ...................................................................................................................................... 22
PHOTO CAPTURE MODE ........................................................................................................................................................... 26
PLAYBACK MODE .................................................................................................................................................................... 30
DELETING CAPTURED IMAGES ..................................................................................................................................................... 35
MENU OPTIONS ..................................................................................................................................................................... 37
PLAYBACK MODE: HDTV .......................................................................................................................................................... 45
Wireless Remote Control ........................................................................................................... 46
USING THE ACTION CAMCORDER VIA THE REMOTE CONTROL ............................................................................................................... 46
CHANGING THE BATTERY OF THE REMOTE CONTROL .......................................................................................................................... 47
Camcorder Technical Specifications ........................................................................................... 48
Vivitar Action Cam - Mobile Device Application .......................................................................... 49
MOBILE DEVICE REQUIREMENTS ................................................................................................................................................. 49
INSTALLING THE VIVITAR ACTION CAM APPLICATION......................................................................................................................... 49
CONNECTING YOUR ACTION CAM TO YOUR MOBILE DEVICE ............................................................................................................... 50
USING THE VIVITAR ACTION CAM APPLICATION............................................................................................................................... 51
Vivitar Experience Image Manager Software ............................................................................. 73
COMPUTER SYSTEM REQUIREMENTS ............................................................................................................................................ 73
INSTALLING THE SOFTWARE – USING THE CD ROM ......................................................................................................................... 74
INSTALLING THE SOFTWARE – USING THE ONLINE LINK ..................................................................................................................... 76
2
CONNECTING THE CAMCORDER TO THE COMPUTER ......................................................................................................................... 76
GETTING VIDEOS AND PHOTOS FROM THE CAMCORDER TO THE COMPUTER ........................................................................................... 77
GETTING STARTED! .................................................................................................................................................................. 78
TRANSFERRING IMAGES MANUALLY FROM THE CAMCORDER TO THE COMPUTER ..................................................................................... 78
Camcorder Maintenance ............................................................................................................ 80
MEMORY CARD MAINTENANCE .................................................................................................................................................. 80
DEVICE MAINTENANCE ............................................................................................................................................................. 81
Troubleshooting .......................................................................................................................... 82
CAMCORDER .......................................................................................................................................................................... 82
VIVITAR EXPERIENCE IMAGE MANAGER......................................................................................................................................... 84
Sakar Warranty Card .................................................................................................................. 85
Technical Support ....................................................................................................................... 86
3
Introduction
Thank you for purchasing the Vivitar DVR 794HDv4 Full HD Wi-Fi Action Camcorder. Everything
you need to take high definition digital videos and photos is included with your camcorder.
This unique, ultraportable camera design is adapted specifically for this camera and can be used
to capture special moments in many different environments.
Vivitar makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camcorder.
NOTE:
Your digital action camcorder supports a Class 6 or higher Micro SD card with a capacity
expansion up to 32GB.
In order to use your digital action camcorder normally, please insert the Micro SD Memory
card before use. Please format the Micro SD Memory Card before first use.
Micro SD Memory cards are not included and need to be purchased separately.
This camcorder is a plug and play device. You can download the pictures and videos
without the software by directly accessing the camera’s memory card from your computer.
We would however recommend that you install the Vivitar Experience Image Manager
software to enjoy the full Vivitar experience.
4
What’s Included
1. Wi-Fi Action Camcorder
6. Wireless Remote Control
2. USB Cable
7. Bicycle Mount
3. AC Adapter
8. Helmet Mount & Strap
4. Vivitar Experience Installation CD
9. Lithium Battery
5. Waterproof Casing
10. Camera Shield
NOTE: Micro SD Card not included.
5
Parts of the Camcorder
1.
Shutter / OK Button
8.
Wi-Fi Button / Down Button
2.
Power / Mode Button
9.
Battery Cover
3.
Lens
10.
LCD Screen
4.
Charging (Blue) / Busy (Red) LED Indicator
11.
Working LED Indicator
5.
Microphone
12.
Speaker
6.
Menu / Display Button
13.
Micro SD Card Slot
7.
Wi-Fi Button LED Indicator
14.
Mini HDMI Port
15.
Micro USB Port
6
Initial Camcorder Setup
INSTALLING AND CHARGING THE BATTERY
TO INSTALL THE LITHIUM BATTERY:
1. If the camera is inside the waterproof casing, please take it out of the casing.
2. Push and hold the battery cover lever up to the unlock/open position, until it flips open.
3. Insert the battery into the battery compartment as shown. Make sure to place the battery
according to the correct polarity as shown inside the battery compartment.
4. Close the battery cover.
7
TO CHARGE THE LITHIUM BATTERY:
1. Power off the camcorder.
2. Open the USB cover. Connect the included USB cable to the camcorder and connect the
other end of the cable to a power source such as the included AC charger or to a
computer. Please refer to the images shown below for reference.
CHARGING USING THE AC CHARGER:
CHARGING USING THE COMPUTER:
3. During the time the camcorder is charging, the LED charging status indicator light (blue) is
on. It takes about 3 to 4 hours to fully charge the battery. When the battery is fully charged
the LED status indicator light turns off.
8
NOTE:
While the device is charging it cannot be used to capture images.
When the camcorder is on, connecting it to a computer will not charge the device. Make sure
the camcorder is powered off to recharge.
BATTERY INDICATOR:
Battery Indicator
Description
The battery level is full.
The battery level is half.
The battery level is low, indicating to prepare for
recharging the built-in lithium battery.
Once ‘Low Battery’ appears on the LCD, this
indicates that the battery level is completely exhausted
and the camcorder automatically turns off after a few
seconds. Please fully recharge the battery.
NOTE: When the battery capacity drops to a low level, the battery icon will flash on the display,
indicating that the camcorder requires to be recharged. Please charge the battery. When the
battery icon flickers, the camcorder will shut down automatically.
INSTALLING THE MICRO SD MEMORY CARD
Make sure a High Speed Class 6 or higher Micro SD Memory card has been properly inserted
into your camcorder. A Micro SD Card must be inserted before use.
Micro SD Memory card not included.
9
INSTALLING THE MEMORY CARD:
To properly insert the Micro SD Card, follow the instructions below:
1. Power off the camcorder.
2. Open the Micro SD Card cover.
3. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown above.
4. Gently press the Micro SD Card until you hear a slight clicking sound. This indicates the
memory card has been inserted correctly.
5. To remove the card, gently press on the edge of the card to release it and pull the card out.
IMPORTANT:
Please power the camcorder off before installing or taking out the memory card.
If the card is inserted or removed while the camcorder's power is on, it may damage the card
and/or any recorded data. Always confirm that the power is off before inserting the card into
the camcorder.
Make sure there is room on the Micro SD Memory Card for additional images. If the Micro SD
Memory Card is full, additional images will not be added to the memory card.
POWERING ON – OFF / ENERGY SAVE
TO POWER ON THE CAMCORDER:
1. Press and hold the Power button for about 2 seconds.
2. The LCD displays turns on and a sound can be heard from the camcorder’s speaker.
10
TO POWER OFF THE CAMCORDER:
1. Press and hold the Power button for about 2 seconds.
2. A sound can be heard from the camcorder’s speaker and the camcorder powers off.
ENERGY SAVE AND AUTO POWER OFF:
ENERGY SAVE: The camera automatically enters Sleep Mode (Energy Save) after one minute of
inactivity to save energy. Once the camera is in Sleep Mode, the Charging/Busy LED Indicator
light (red light, front side of camera) remains on. Short press any camera button to reactivate the
camera.
AUTO POWER OFF: Your camcorder also has an auto power off feature that will automatically
turn off your camcorder after a specific period of time that your camera is left idle. The auto power
off time settings can be set from the ‘Power Save’ settings menu.
NOTE: Shutdown due to low power. When the camera’s power is extremely low, the LCD will
display the Low Battery Power icon . The camera will automatically power off. Please
recharge the battery.
USING THE CAMCORDER
Press the MODE button to
select the mode.
Press the Shutter/OK button to capture
your videos and photos.
11
Main Camcorder Modes
Your camera has different modes for the various camera functions.
Short press the Power/Mode button to toggle between the Video Capture, Photo Capture and
Playback Modes.
Video Capture Mode
Use this mode to capture videos with your digital camcorder.
To record a video, please check that the DV is in Video mode. If the video icon is not
displayed on the LCD screen, short press the Power/Mode button repeatedly until it
appears. To start recording, press the Shutter/OK button. Press the Shutter/OK button
again to stop recording. The video is automatically saved to your camcorder’s memory
card.
Car Carrying Capture Mode
Use this mode to capture videos in motion with your camcorder.
To take a video, please check that the DV is in Car Carrying mode. If the car carrying
icon is not displayed on the LCD screen, short press the Power/Mode button
repeatedly until it appears. Press the Shutter/OK button to capture your video. The video
is automatically saved to your camcorder’s memory card.
NOTE:
1) In Car Carrying mode, a passage of video is kept every three minutes in recording.
After the storage card is full, the earliest passage will be deleted, and video will be
recorded in a circulating way.
2) Boot after choosing Car Carrying mode, normal shutdown again after boot, then
connecting to the car charger will automatically enter the Car Carrying mode and
start the video recording.
12
Photo Capture Mode
Use this mode to capture pictures with your camcorder.
To take a photo, please check that the DV is in Photo mode. If the photo icon is not
displayed on the LCD screen, short press the Power/Mode button repeatedly until it
appears. Press the Shutter/OK button to capture your photo. The picture is automatically
saved to your camcorder’s memory card.
Playback Mode (Car, Video, JPG)
Use this mode to view and manage your captured videos and photos via your camcorder.
Please check that the DV is in Playback mode. If the Playback icon is not displayed on
the LCD screen, short press the Power/Mode button repeatedly until it appears.
NOTE: Your captured images can be also viewed either on the computer, on your
television or your mobile device.
Playback Mode on the Computer: After turning on your camcorder, connect it to your
computer via the supplied USB cable to view the images on your computer.
Playback Mode on the HDTV: After turning on your camcorder and connecting it to an
HDTV via an HDMI cable (purchased separately), it enters Playback Mode.
Mobile Device: After downloading the Vivitar Action Cam app to your mobile device and
connecting it via Wi-Fi to your camera, tap the Playback Media icon to view your captured
images.
13
Camcorder Mounts and Accessories
WATERPROOF CASE
1. Shutter Release
2. Clamp (Securing Latch)
3. Power/Mode Button
4. Menu Button
5. Wi-Fi Button
Your action cam comes with a waterproof casing for underwater action and added durability. To
assemble your camera to the case, follow the instructions below:
1. Open the latch on the waterproof casing. To open the case, insert a finger at the half circle
of the latch by prying the latch up - away from the case.
2. Insert the camera lens forward into the case.
3. Before sealing the waterproof case, make sure the camera housing’s rubber seal is clean.
Carefully check whether the waterproof ring of the casing is flat and smooth. Close the
door and secure the latch.
4. After putting the device in and closing the cover of the waterproof casing, carefully check
4
3
1
2
5
14
whether the waterproof ring is deformed due to pressure.
5. While the camcorder is in the waterproof casing, press the POWER/MODE button to
select either Video or Photo Capture Mode. Press the Shutter button for recording your
videos and capturing your photos.
NOTE:
A single hair or grain of sand can cause a leak. You can test by closing the case without
inserting the camera. Submerse the case completely in water for about a minute. Remove the
case from the water, dry off its exterior with a towel, and then open the case. If the entire
interior is dry, the case is safe for use under water.
Before opening the waterproof casing and putting the device in, carefully check whether the
waterproof ring of the casing is flat and smooth.
After placing the device into the waterproof casing and closing the cover, carefully check
whether the waterproof ring is deformed due to pressure.
After every use in salt water you will need to rinse the outside of the housing with non-salt
water and dry. Not doing this can eventually cause corrosion of the hinge pin and salt buildup
in the seal, which can cause failure.
To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to
compromise the seal). Re-install the seal into the grooves of the housing.
INSTALLING THE BICYCLE MOUNT
15
INSTALLING THE HELMET MOUNTING SYSTEM
Using Your Action Camcorder
POWERING ON YOUR CAMCORDER
1. Press and hold the POWER button for about 2 seconds to turn on the camcorder.
The LCD screen briefly displays the ‘Vivitar’ screen and opens to the Video Capture Mode.
2. Press and hold the POWER button again for about 2 seconds to turn the power off.
CHANGING CAMCORDER MODE
CAMCORDER MODES
1. Video Capture Mode (Standard) - Use this mode to capture videos with your camcorder.
2. Video Capture Mode (Car Carrying) – Use this mode to capture videos in motion with
your camcorder.
3. Photo Capture Mode - Use this mode to capture photos with your camcorder.
4. Playback Mode (for photos and videos) – Connect to your camcorder to your computer
or television to use this mode to view your captured photos and videos.
16
SWITCHING MODES
After turning on the camcorder, short press the POWER/MODE button to switch between the
four modes in turn:
When in Video Capture Mode - Standard, this icon will display on the top-left corner of the
LCD display.
When in Video Capture Mode – Car Carrying, this icon will display on the top-left corner
of the LCD display. The display appears upside down.
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD
display.
When in Playback Mode, the Playback icon and list of media ‘CAR, VIDEO, JPG’ will
display on the LCD display.
In Video Capture Mode, press the SHUTTER button to start recording and press it again to
stop.
In Car Carrying Video Capture Mode, press the SHUTTER button to start recording and press
it again to stop.
In Photo Capture Mode, press the SHUTTER button to take photo.
In Playback Mode, press the SHUTTER button to play back your selected Video.
17
NAVIGATING THE MENUS
VIDEO CAPTURE, PHOTO CAPTURE AND PLAYBACK MENUS
To access the Main Menu for each Mode:
1. Press the MENU / DISP. button to open the Main Menus for the current mode.
2. Press the DOWN (WI-FI) button to select a specific menu.
The selected option appears highlighted.
3. Press the SHUTTER/OK button to confirm and save your selection and open the options
for the menu you have selected.
4. To select a specific option, press the DOWN (WI-FI) button to select an option and then
the SHUTTER/OK button to save the selected option and return to the menu screen.
NOTE:
To go back from the submenus or exit the Main Menu, press the MENU / DISP. button.
GENERAL CAMCORDER SETTINGS MENUS
To access the General Camcorder Settings Menu:
1. Press the MENU button to open the menu screen while in any mode.
2. Short press the POWER/MODE button to select the tab with the General Camcorder
Settings icon .
NOTE: If you have already highlighted a menu item and would like to enter the Settings
Menu, press the
DOWN (WI-FI) button until there is no menu item highlighted. This
indicates that the top, left current tab (Video, Photo, or Playback) is selected. You can now
short press the POWER/MODE button to switch to the Settings tab.
3. Press the DOWN (WI-FI) button to select a specific menu.
The selected option appears highlighted.
4. Press the SHUTTER/OK button to confirm and save your selection and open the options
for the menu you have selected.
5. To select a specific option, press the DOWN (WI-FI) button to select an option and then
the SHUTTER/OK button to save the selected option and return to the menu screen.
18
NOTE:
At any time you can press the MENU button to exit the menus and return to the previous
screen.
Once you change a setting, the setting is saved by your camera until you manually change
the setting or restore the camera’s default factory settings.
After selecting your desired setting, some settings appear as an icon on the LCD screen in
Capture Mode – indicating the option selected.
VIDEO CAPTURE – STANDARD MODE
The Video Capture Mode allows you to capture videos with your digital camcorder.
After powering on your camcorder, the camcorder automatically enters the Video Capture Mode –
either Standard or Car Carrying mode, depending on what mode was last used prior to powering
off your camcorder. If needed, press the POWER/MODE button until the Video Capture icon appears.
TAKING A VIDEO
1. Selecting the Scene with the LCD Display:
Use the LCD display to direct the camcorder at the scene you would like to capture.
NOTE: The time available for video capture (as per the installed memory card size and
selected resolution) is shown on the top right of the LCD screen.
2. Changing Resolution:
If you would like to change the resolution, press the MENU button and then press the
DOWN (WIFI) button to select ‘Movie Size’. Next, press the SHUTTER/OK button to
view the Movie Size options. Press the DOWN (WIFI) button to select an option and
then press the SHUTTER/OK button to confirm the option.
The Movie Size options include:
1080P - 1080P (30fps)
720P - 720P (60fps)
720P - 720P (30fps)
19
3. Capturing the Video:
START: Press the SHUTTER/OK button to start the video capture.
The camcorder’s LED busy light (red) turns on and blinks. All icons disappear and the
elapsed time appears on the top right corner of the LCD screen along with a blinking
icon REC that indicates the recording is in progress.
STOP: Press the SHUTTER/OK button again to stop the video recording.
4. The video is automatically saved to the camcorder’s Micro SD Memory card.
NOTE:
While capturing your video, after approximately one minute of video capture, the LCD display
turns off in order to save power. The busy LED light remains on and the video continues to be
captured. Press the any button to reactivate the LCD display.
After recording the video, the updated amount of available time left to capture additional
videos as per your memory card size and selected resolution size appears on the LCD
screen.
If the memory card is full or the battery level is low, the camera will automatically stop
recording the video
VIDEO CAPTURE MODE BUTTONS
Button
Description
SHUTTER / OK
STARTS/STOPS: Starts and stops the video capture.
ENTERS SUBMENU/SAVES SELECTION: Within the Menu, enters the
selected menu’s submenu list and saves the selected submenu option.
MENU
OPENS/EXITS MENU: Opens and exits the menu options for Video
Capture Mode and General Camera Settings.
NOTE: Use the DOWN (Wi-Fi) button to navigate within the menu options.
POWER / MODE
POWERS ON/OFF:
LONG PRESS: Powers the camcorder on and off.
/
