Panasonic TX-P50XT50 Owner's manual

TQB0E2190P4

Operating Instructions

Plasma Television

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before operating this product and

retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Please refer to Pan European Guarantee Card if you need to contact your

local Panasonic dealer for assistance.

Model No.

TX-P42XT50E

TX-P50XT50E

English

Nederlands

For more detailed instructions, refer to the

Operating Instructions on the CD-ROM.

To view the Operating Instructions on the CD-ROM,

you need a computer equipped with a CD-ROM

drive, and Adobe

®

Reader

®

(Version 8.0 or later is

recommended) installed on your computer.

Depending on the operating system or settings on your

computer, the Operating Instructions may not start

automatically.

In this case, open the PDF file under the “MANUAL”

folder manually to view the instructions.

Contents

Be Sure to Read

Safety Precautions ······································2

Quick Start Guide

Accessories ·················································4

Identifying Controls ······································7

Basic Connection·········································9

Auto Setup ·················································12

Using “VIERA Connect” ·····························16

Viewing 3D images ····································17

How to Use VIERA TOOLS ·······················20

How to Use Menu Functions ·····················21

Maintenance ·············································· 22

English

2

Safety Precautions

Warning

Handling the mains plug and lead

●

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)

●

Ensure that the mains plug is easily accessible.

●

Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.

•

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing

connection.

●

Do not touch the mains plug with a wet hand. (This may cause electrical shock.)

●

Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)

●

Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)

•

Do not move the TV with the lead plugged in the socket outlet.

•

Do not place a heavy object on the lead or place the lead near a high-temperature object.

•

Do not twist the lead, bend it excessively or stretch it.

•

Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.

•

Do not use a damaged mains plug or socket outlet.

If you find any abnormality,

remove the mains plug

immediately!

AC 220-240 V

50 / 60 Hz

Power source

●

This TV is designed to operate on AC 220-240 V,

50 / 60 Hz.

Do not remove covers and NEVER

modify the TV yourself

●

Do not remove the rear cover as live parts are

accessible when it is removed. There are no user

serviceable parts inside. (High-voltage components

may cause serious electrical shock.)

●

Have the TV checked, adjusted, or repaired at your

local Panasonic dealer.

Do not expose to direct sunlight and

other sources of heat

●

Avoid exposing the TV to direct sunlight and other

sources of heat.

To prevent the spread

of fire, keep candles

or other open flames

away from this product

at all times

Do not expose to rain or excessive

moisture

●

To prevent damage which might result in electric shock

or fire, do not expose this TV to rain or excessive

moisture. This TV must not be exposed to dripping or

splashing water and objects filled with liquid, such as

vases, must not be placed on top of or above the TV.

Do not insert foreign objects into the TV

●

Do not allow any objects to drop into the TV through

the air vents. (Fire or electrical shock may result.)

Do not place the TV on sloped or

unstable surfaces, and ensure that the

TV does not hang over the edge of the

base

●

The TV may fall off or tip over.

Use only the dedicated pedestals /

mounting equipment

●

Using an unapproved pedestal or other fixtures may

make the TV unstable, risking injury. Be sure to ask

your local Panasonic dealer to perform setup.

●

Use approved pedestals (p. 4) / wall-hanging brackets.

Do not allow children to handle SD Card

●

As with any small object, SD Cards can be

swallowed by young children. Please remove SD

Card immediately after use and store out of reach of

children.

English

3

Radio waves

●

Do not use the TV in any medical institutions or locations with medical equipment. Radio waves from the TV may

interfere with the medical equipment and cause accidents due to the malfunction.

●

Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves

from the TV may interfere with the automatic control equipment and cause accidents due to the malfunction.

●

Keep the distance at least 22 cm from the TV when you have a cardiac pacemaker. Radio waves from the part

may interfere with the operation of the pacemaker.

Caution

When cleaning the TV, remove the mains

plug

●

Cleaning an energized TV may cause electrical shock.

When the TV is not going to be used for

a long period of time, remove the mains

plug

●

This TV will still consume some power even in the Off

mode, as long as the mains plug is still connected to a

live socket outlet.

Transport only in upright position

●

Transporting the TV with its display panel facing upward

or downward may cause damage to the internal circuitry.

Allow sufficient space around the TV for

radiated heat

Minimum distance

●

When using the

pedestal, keep the

space between the

bottom of the TV and

the surface where the

TV is set.

●

In case of using

Wall-hanging bracket,

follow the manual of it.

10

7

(cm)

Do not block the rear air vents

●

Blocked ventilation by newspapers, table cloths,

curtains, etc. may cause overheating, fire or electrical

shock.

Do not expose your ears to excessive

volume from the headphones

●

Irreversible damage can be caused.

Do not apply strong force or impact to the

display panel

●

This may cause damage resulting in injury.

The TV is heavy. Handle the TV by 2 or

more people. Support as shown to avoid

injury by the TV tipping or falling.

Bluetooth

®

wireless technology

●

The TV uses the 2.4 GHz radio frequency ISM band (Bluetooth

®

). To avoid malfunctions or slow response caused

by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, other Bluetooth

devices, microwaves, mobile phones and the devices that use 2.4 GHz signal.

English

4

Accessories

Standard accessories

Remote Control

●

N2QAYB000752

Batteries for the

Remote Control (2)

●

R6

(see below)

Pedestal

(see below)

Mains lead

(p. 9)

Ferrite core

for LAN cable (2)

(Large size)

(p. 11)

Ferrite core

for USB cable (2)

(Middle size)

Ferrite core

for headphones

(Small size)

Use the Ferrite cores to comply with the EMC standard.

Operating Instructions

Pan European Guarantee

Card

●

Accessories may not be placed all together. Take care not to throw them away unintentionally.

●

This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by

young children accidentally. Keep these parts out of reach of young children.

Installing / removing remote’s batteries

1

Pull Open

Hook

Caution

●

Incorrect installation may cause battery leakage and corrosion,

resulting in damage to the remote control.

●

Do not mix old and new batteries.

●

Do not mix different battery types (such as alkaline and manganese

batteries).

●

Do not use rechargeable (Ni-Cd) batteries.

●

Do not burn or break up batteries.

Batteries must not be exposed to excessive heat such as sunshine,

fire or the like.

●

Do not disassemble or modify the remote control.

2

Note the correct

polarity (+ or -)

Close

Attaching / removing the pedestal

Warning

Do not disassemble or modify the pedestal.

●

Otherwise the TV may fall over and become damaged, and personal injury may result.

English

5

Caution

Do not use any pedestal other than the one provided with this TV.

●

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

●

If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic

dealer immediately.

During set-up, make sure that all screws are securely tightened.

●

If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong

enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Ensure that the TV does not fall over.

●

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury

may result.

Two or more people are required to install and remove the TV.

●

If two or more people are not present, the TV may be dropped, and personal injury may result.

When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified

procedure.

(p. 6)

●

Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.

Assembly screw (5)

(black)

M4 × 10

Bracket

●

TBL5ZA3238

Cover

●

TXFBL5Z0073

Base

●

TBL5ZX0293

(TX-P42XT50E)

●

TBL5ZX0295

(TX-P50XT50E)

Assembly screw (7)

(silver)

M5 × 16

Neck

●

TXFBL5Z0072

■ Assembling the pedestal

1

Insert the tabs of the neck into the base

firmly

2

Turn the base over and fix the neck securely

with assembly screws

●

Do not hold the neck when turning over the base.

B

F

Back of the base

Screw hole

F

D

Tabs (bottom)

3

Attach the bracket to the tabs of the neck

and fix with assembly screws

4

Attach the cover and fix securely with assembly

screw

B

D

C

Tabs (top)

E

A

English

6

■ Securing the TV

Use the assembly screws to fasten securely.

●

Tighten the four assembly screws loosely at first, then

tighten them firmly to fix securely.

●

Carry out the work on a horizontal and level surface.

A

Hole for pedestal

installation

Arrow mark

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws

from the TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screw from the cover.

4 Remove the assembly screws

from the bracket.

5 Remove the assembly screws

from the back of the base and pull out the neck.

Preventing the TV from falling over

Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the

installation surface.

●

The place where the pedestal is to be fixed should be thick enough and made of hard material.

Screw (not supplied)

Diametre: 3 mm

Length: 25 - 30 mm

Screw hole

English

1

16

17

18

20

22

23

24

25

26

19

27

2

4

5

7

21

12

3

6

8

9

10

11

13

14

15

7

Identifying Controls

Remote Control

1

Standby On / Off switch

●

Switches TV on or off standby.

2

3D button

●

Switches the viewing mode between 2D and 3D.

3

[Main Menu]

●

Press to access Picture, Sound, Network, Timer

and Setup Menus.

4

Aspect

●

Changes aspect ratio.

5

Information

●

Displays channel and programme information.

6

VIERA TOOLS

●

Displays some special feature icons and accesses

easily.

7

INTERNET ([VIERA Connect])

●

Displays VIERA Connect home screen.

8

OK

●

Confirms selections and choices.

●

Press after selecting channel positions to quickly

change channel.

●

Displays the Channel List.

9

[Option Menu]

●

Easy optional setting for viewing, sound, etc.

10

Coloured buttons

(red-green-yellow-blue)

●

Used for the selection, navigation and operation of

various functions.

11

Teletext

●

Switches to teletext mode.

12

Subtitles

●

Displays subtitles.

13

Numeric buttons

●

Changes channel and teletext pages.

●

Sets characters.

●

When in Standby mode, switches TV on (Press for

about 1 second).

14

Sound Mute

●

Switches sound mute on or off.

15

Volume Up / Down

16

Input mode selection

●

TV - switches DVB-C / DVB-T / Analogue mode.

●

AV - switches to AV input mode from Input

Selection list.

17

Surround

●

Switches surround sound setting.

18

Normalise

●

Resets picture and sound settings to their default

levels.

19

Exit

●

Returns to the normal viewing screen.

20

TV Guide

21

Cursor buttons

●

Makes selections and adjustments.

22

Return

●

Returns to the previous menu / page.

23

Hold

●

Freezes / unfreezes the picture.

●

Holds the current teletext page (teletext mode).

24

Index

●

Returns to the teletext index page (teletext mode).

25

Last view

●

Switches to previously viewed channel or input

mode.

26

Channel Up / Down

27

Operations for contents, connected equipment,

etc.

English

5 6 7

3

1

4

2

8

Indicator / Control panel

Using the On Screen Displays - Operation guide

Many features available on this TV can be accessed via the On Screen Display menu.

■ Operation guide

Operation guide will help you to operate by using the

remote control.

Example: [Sound Menu]

1/2

0

11

Mode Music

Bass

Treble

Balance

Headphone Volume

Surround

Auto Gain Control

Volume Correction

Speaker Distance to Wall

Off

Over 30cm

Main Menu

Picture

Sound

Network

Timer

Setup

Select

EXIT

Selects your favourite sound

mode.

Page up

Change

RETURN

Page down

Operation guide

S

elec

t

EXIT

S

elects

y

our

f

avourite sound

m

ode

.

Page

up

C

han

ge

R

ET

U

R

N

Pa

g

e dow

n

■ How to use remote control

Open the main menu

Move the cursor / select from a range of options /

select the menu item (up and down only) / adjust

levels (left and right only)

Access the menu / store settings after adjustments

have been made or options have been set

Return to the previous menu

Exit the menu system and return to the normal

viewing screen

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:

•

No signal is received and no operation is performed for 30 minutes in Analogue TV mode.

•

[Off Timer] is active in the Timer Menu.

•

No operation is performed for the period selected in [Auto Standby].

●

This function does not affect the recording of Timer Programming and Direct TV Recording.

1

Function select

●

[Volume] / [Contrast] / [Brightness] / [Colour] /

[Sharpness] / [Tint] (NTSC signal) / [Bass]

∗

/

[Treble]

∗

/ [Balance] / [Auto Setup]

∗

[Music] or [Speech] mode in the Sound Menu

2

Channel Up / Down, Value change (when using the

F button), Switching the TV on (press either button

for about 1 second when in Standby mode)

3

Changes the input mode

4

Mains power On / Off switch

●

Use to switch the mains power.

If you turned the TV off during Standby mode

by the remote control last time, the TV will be

in Standby mode when you turn the TV on with

Mains power On / Off switch.

When pressing the control panel button (1 - 4), the

control panel guide appears on the left side of the

screen for 3 seconds to highlight the pressed button.

5

Remote control signal receiver

●

Do not place any objects between the TV remote

control signal receiver and remote control.

6

C.A.T.S. (Contrast Automatic Tracking System)

sensor

●

Senses brightness to adjust picture quality when

[Eco Mode] in the Picture Menu is set to [On].

7

Power and Timer LED

Red: Standby

Green: On

Orange: Timer Programming On

Orange (flash):

Recording of Timer Programming or Direct TV

Recording in progress

Red with orange flash:

Standby with Timer Programming On or Direct

TV Recording

●

The LED blinks when the TV receives a command

from the remote control.

Rear side of the TV

English

9

Basic Connection

External equipment and cables shown are not supplied with this TV.

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

There are some restrictions on placement for viewing 3D images. For details

(p. 17, 18)

Terminals

3

2

4

1

5

6

7

8

9

10

1

SD Card slot

2

CI slot

3

Headphone jack

4

USB 1 / 2 port

5

ETHERNET

6

DIGITAL AUDIO OUT

7

AV1 (SCART)

8

AV2 (COMPONENT / VIDEO)

9

Terrestrial / cable terminal

10

HDMI1 / 2

Connections

Mains lead and aerial

Cable

■ DVB-C, DVB-T, Analogue

AC 220-240 V

50 / 60 Hz

Mains lead

Terrestrial aerial

RF cable

■ Mains lead

Push until both side

tabs click

Make sure that

the mains lead is

securely fixed.

To remove from the TV:

tabs

Press both tabs and pull

on mains connector to

release

English

10

AV devices

■ Player / 3D compatible player

TV

Player /

3D-compatible player

HDMI cable

■ DVD Recorder / VCR

TV

DVD Recorder / VCR

Cable

SCART cable

RF cable

Terrestrial aerial

RF cable

■ DVD Recorder / VCR and Set top box

TV

Set top box

HDMI cable

SCART cable

DVD Recorder / VCR

Terrestrial

aerial

RF cable

RF Cable

Note

●

Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link.

●

Please also read the manual of the equipment being connected.

●

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.

Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.

●

When using a SCART or HDMI cable, use the fully wired one.

●

Check the type of terminals and cable plugs are correct when connecting.

English

11

Network

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network

environment.

●

If you do not have any broadband network services, please consult your retailer for assistance.

●

Prepare the internet environment for wired connection or wireless connection.

●

Setup of the network connection will start after the tuning (when first using the TV). (p. 13 - 15)

■ Wired connection

TV

Internet environment

∗

Less than 10 cm

LAN cable (Unshielded)

●

Use the Unshielded Twist Pair (UTP) LAN cable.

Ferrite core - Large size (supplied)

Installing the Ferrite core

Pull back the tabs

(in two places)

Wind the cable twice Close

■ Wireless connection

TV

Internet environment

Access point

Wireless Adaptor (optional accessory)

●

Connect to the USB 1 or 2 port.

English

12

Auto Setup

Search and store TV channels automatically.

●

These steps are not necessary if the setup has been completed by your local dealer.

●

Please complete connections (p. 9 - 11) and settings (if necessary) of the connected equipment before starting Auto

Setup. For details of settings for the connected equipment, read the manual of the equipment.

1

Plug the TV into mains socket and switch on

●

Takes a few seconds to be displayed.

●

If the red LED shows on the TV, press the Standby On / Off switch on the

remote control for about 1 second.

2

Select the language

Menüsprache

Deutsch Dansk Polski Srpski

English Svenska čeština Hrvatski

Français Norsk Magyar Slovenščina

Italiano Suomi Slovenčina Latviešu

Español Türkçe Български eesti keel

Português Еλληνικά Română Lietuvių

Nederlands

select

set

3

Select your country

Country

Germany

Denmark

Poland

Austria Sweden Czech

France Norway Hungary

Italy Finland Slovakia

Spain Luxembourg Slovenia

Portugal Belgium Croatia

Switzerland Netherlands Estonia

Malta Turkey Lithuania

Andorra Greece Others

select

set

●

Depending on the country you select,

select your Region or store the Child Lock-

PIN number (“0000” cannot be stored) by

following the on-screen instructions.

4

Select the mode to tune

TV Signal Selection

DVB-C

DVB-T

Analogue

Start Auto Setup

select

tune / skip tuning

: tune (search for the available channels)

: skip tuning

5

Select [Start Auto Setup]

TV Signal Selection

DVB-C

DVB-T

Analogue

Start Auto Setup

select

access

●

Auto Setup will start to search for TV channels and store them.

The stored channels and sorted channel order vary depending on the country, area,

broadcasting system and conditions of signal reception.

Auto Setup screen varies depending on the country you select.

English

13

5

1 [DVB-C Network Settings]

●

Depending on the country you select, select your cable provider beforehand by following the on-screen

instructions.

Frequency Auto

Network ID

Start Auto Setup

Auto

DVB-C Network Settings

select [Start Auto Setup]

access

Normally set [Frequency] and [Network ID] to [Auto].

If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider

with numeric buttons.

2 [DVB-C Auto Setup] 3 [DVB-T Auto Setup]

0% 100%

1

2

3

100

CBBC Channel

BBC Radio Wales

E4

100

Searching

DVB-C Auto Setup

Progress

This will take about 3 minutes.

No. Channel Name Type

Free TV

Quality

Free TV: 3 Pay TV: 0 Radio: 0

CH 5 69

62

100

CBBC Channel

BBC Radio Wales

E4

100

62 100Cartoon Nwk

Searching

CH Channel Name Type

Free TV

Quality

Free TV: 4 Pay TV: 0 Radio: 0

DVB-T Auto Setup

Progress

This will take about 3 minutes.

●

Depending on the country you select, the channel selection screen

will be displayed after DVB-T Auto Setup if multiple channels have

the same logical channel number. Select your preferred channel or

exit the screen for automatic selections.

4 [Analogue Auto Setup] 5 Preset Download

If Q-Link, VIERA Link or similar technology compatible recorder

is connected, channel, language and country / region settings are

automatically downloaded to the recorder.

0% 100%

Sending Preset Data

Please wait!

Remote control unavailable

●

If downloading has failed, you can download later through the

Setup Menu.

CH 29

CH 33 BBC1

CH 2 78 41CC 1

Searching

CH Channel Name

Analogue: 2

Analogue Auto Setup

Scan

This will take about 3 minutes.

6

Setup the network connection

Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 16).

●

To setup the wireless connection, the Wireless Adaptor (optional accessory) is required. Please note that this

TV does not support wireless public access points.

●

Ensure the network connections (p. 11) and network environment are completed before starting setup.

Select the network type

Network Setup

Select Wired or Wireless

Wired Wireless Set later

[Wired] “Wired connection” (p. 11)

[Wireless]

“Wireless connection” (p. 11)

select

access

●

To setup later on or skip this step

Select [Set later] or

■ [Wired]

1. Select [Auto]

Check network cable connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection.

Connection Test

: succeeded

The test is successful

and the TV is

connected to the

network.

: failed

Check the settings and

connections. And then

select [Retry].

Acquire IP Address

Auto Manual

select

access

Automatically setup is done and the test of the

network connection starts.

●

To set manually, select [Manual] and set each item.

2. Go to the next step

(Press twice)

English

14

6

■ [Wireless]

Access points found automatically are listed.

1. Select your desired access point

1

2

3

Access Point A

Access Point B

Access Point C

11n(2.4GHz)

11n(5GHz)

Available Wireless Networks

No. Network Name(SSID) Status Wireless type

select

access

●

For [WPS(Push button)] (p. 15)

(red)

: Encrypted access point

●

To search access points again

(blue)

●

For the information of the highlighted

access point

●

To set manually

(yellow)

2. Access the encryption key input mode

Encryption Key Setting

Security type : WPA-PSK

Encryption type : TKIP

Please input the encryption key.

Encryption key

Connection will be made with the following settings:-

Network Name(SSID) : Access Point A

●

If the selected access point is not encrypted, the confirmation

screen will be displayed. It is recommended to select the encrypted

access point.

3. Enter the encryption key of the access point

A B C D E F G H I J K L M N O P Q R S T

U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #

a b c d e f g h i j k l m n o p q r s t

u v w x y z ( ) + - . * _ @ / “ ‘ % & ?

, ; = $ [ ] ~ < > { } | ` ^ \

Wireless Network Settings

Encryption key

Set characters

Store

select

set

●

You can set characters by using numeric

buttons.

4. After the access point setting is finished, perform the connection test

Check wireless network connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection.

Connection Test

: succeeded

The test is successful and the TV is connected to the

network.

: failed

Check the settings and connections. And then select

[Retry].

●

To set manually, select [Manual] and set each item.

5. Go to the next step

(Press twice)

English

15

6

[WPS(Push button)]

1. Press the WPS button on the access point until the light flashes

2. Connect the Wireless Adaptor and the access point

1) Please press the ‘WPS’ button on the wireless

access point until its light flashes.

2) When the light is flashing select ‘Connect’ on

TV.

If you are unsure, please check the instruction

manual of the wireless access point.

WPS(Push button)

Connect

●

Ensure that your access point supports WPS for this setup.

●

WPS: Wi-Fi Protected Setup™

●

If the connection has failed, check the settings and positions of

your access point. And then, follow the on-screen instructions.

3. After the access point setting is finished, perform the connection test

Check wireless network connection.

Check acquired IP address.

Check for devices using same IP address.

Check gateway connection.

Check server connection.

Connection Test

: succeeded

The test is successful and the TV is connected to the

network.

: failed

Check the settings and connections. And then select

[Retry].

●

To set manually, select [Manual] and set each item.

4. Go to the next step

(Press twice)

7

Select [Home]

Select [Home] viewing environment to use in your home environment.

Please select your viewing environment.

Home Shop

select

set

■ [Shop] viewing environment (for shop display only)

[Shop] viewing environment is the demonstration mode to explain main features of this TV.

Select [Home] viewing environment to use in your home environment.

●

You can return to viewing environment selection screen at the stage of Shop confirmation screen.

1 Return to viewing environment

selection screen

2 Select [Home]

Please select your viewing environment.

Home Shop

select

set

Shop

You have selected shop mode

To change viewing environment later on, you will need to initialise all settings by accessing Shipping

Condition.

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.

Note

●

To retune all channels [Auto Setup] in the Setup Menu

●

To add the available TV mode later [Add TV Signal] in the Setup Menu

●

To initialise all settings [Shipping Condition] in the Setup Menu

English

16

Using “VIERA Connect”

VIERA Connect is a gateway to the internet services unique to Panasonic.

VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents

such as videos, games, communication tools, etc. from VIERA Connect home screen.

●

This TV does not support full web browser function and some features of the websites may not be available.

1

Turn power on

●

Press for about 1 second.

●

Mains power On / Off switch should be on.

(p. 8)

●

Every time you turn on the TV, VIERA Connect introduction banner appears. The

banner is subject to change.

Enjoy selected internet content with VIERA Connect.

Simply press the OK / INTERNET button

2

Access VIERA Connect

While the banner is displayed

or

●

Depending on the usage conditions, it may take a while to read all the data.

●

Messages might be displayed before VIERA Connect home screen.

Please read these instructions carefully and follow the on-screen instructions.

Example: VIERA Connect home screen

MORE

BACK

●

To go to the next level, select

[MORE].

●

To back to the previous level,

select [BACK].

●

To return to VIERA Connect home

screen

■

To exit from

VIERA Connect

●

To set the VIERA

Connect introduction

banner display off

[VIERA Connect

Banner]

English

17

Viewing 3D images

You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D

Eyewear.

This TV supports [Frame Sequential]

∗

1

, [Side by Side]

∗

2

and [Top and Bottom]

∗

3

3D formats.

∗

1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately

played back.

∗

2,

∗

3: Other available 3D formats

●

How to view the 3D images (p. 18)

Caution

To use 3D Eyewear safely and comfortably, please read these instructions fully.

Viewing 3D Content

●

Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing

medical conditions.

●

Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any other

uncomfortable sensation. When you set the effect by using [3D Adjustment], take into account that the vision of 3D

images varies among different individuals.

●

Take an appropriate break after viewing a 3D movie.

●

Take a break of between 30 - 60 minutes after viewing 3D content on interactive devices such as 3D games or

computers.

●

Be careful not to strike the TV screen or other people unintentionally. When using the 3D Eyewear the distance

between the user and screen can be misjudged.

●

The 3D Eyewear must only be worn when viewing 3D content.

●

Use the 3D Eyewear where there is no interference from other devices with Bluetooth signal.

●

If you suffer from any eyesight problems (short / far-sighted, astigmatism, eyesight differences in left and right),

please ensure to correct your vision before using the 3D Eyewear.

●

Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.

●

Do not use the 3D Eyewear at a distance less than the recommended distance.

The recommended viewing distance is at least 3 times of the image height.

TX-P42XT50E: 1.6 m or more

TX-P50XT50E: 1.9 m or more

When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance at least 3

times of the height of the actual image. (That makes the distance closer than above recommended figure.)

3D Eyewear Use

●

Pay special attention when children are using the 3D Eyewear.

3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be

fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear.

●

Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or

injury.

●

Remove the 3D Eyewear before moving around to avoid falling or accidental injury.

●

Use the 3D Eyewear only for the intended purpose and nothing else.

●

Do not use 3D Eyewear in the condition of high temperature.

●

Do not use if the 3D Eyewear is physically damaged.

●

Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic waves near

the 3D Eyewear as this may cause the 3D Eyewear to malfunction.

●

Stop using the 3D Eyewear immediately if a malfunction or fault occurs.

●

Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around the nose or

temples.

●

In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction.

English

18

3D Eyewear (optional)

●

Use the Panasonic 3D Eyewear that has this logo and supports

Bluetooth

®

wireless technology.

“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D

glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on

the logo means the wireless system (Bluetooth

®

wireless technology), and you can use the 3D

Eyewear and the TV that have the same mark together.

Note

●

Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyewear

too far from the TV, because of the difficulty of receiving radio waves from the TV.

●

The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding

environment.

●

There are differences in the viewing range of the 3D Eyewear among individuals.

●

The 3D Eyewear may not operate correctly at the outside of the viewing range.

To view the 3D images

You can enjoy the 3D images in a variety of ways.

(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)

■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)

●

Connect the 3D-compatible player via a fully wired HDMI compliant cable.

●

If input mode is not switched automatically, select the input mode connected to the player.

●

If you use the non 3D-compatible player, the images will be displayed on 2D mode.

■ 3D-supported broadcast

●

Please consult the suppliers of contents or programmes for availability of this service.

■ 3D photos and 3D videos taken by 3D-compatible Panasonic products

●

Available in Media Player and Network services

■ 2D images converted to 3D

●

Set to [2D 3D] mode in [3D Mode Selection].

Preparations

Perform the First Registration when the 3D Eyewear is used for the first time. For details, read the manual of the 3D

Eyewear.

1

Turn the 3D Eyewear on and put it on

●

Connection status and battery status are displayed on the bottom right of the screen.

2

View the 3D images

●

Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view

3D images.

If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off

switch is next turned on. Select [No] if you do not want to display this message again.

●

Turn off the 3D Eyewear after using it.

English

19

Changing 2D - 3D mode

You can easily change the viewing mode between 2D and 3D using the 3D button.

Select the mode

2D

3D

2D

3D Mode Selection

select

set

●

Items of [3D Mode Selection] vary

depending on the condition.

[3D] / [2D] / [2D

3D]:

Displays the appropriate image that you desire without selecting 3D format.

●

This mode may not work properly depending on the source image format. In this case, select the appropriate 3D

format manually.

■ To change 3D format manually

When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.

During the above operation Select the mode

(red)

2D 3D

3D Mode Selection (Manual)

Top and Bottom - 2D

Top and Bottom - 3D

Side by Side - 2D

Side by Side - 3D

Frame Sequential - 2D

Frame Sequential - 3D

Original

select

set

Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format

If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.

[3D Mode Selection]

Source

image format

[Original]

[Frame

Sequential

- 3D]

[Side by Side

- 3D]

[Top and

Bottom - 3D]

[2D 3D]

Frame Sequential

Normal 3D

∗

1

Side by Side (Full)

Normal 3D

∗

1

Side by Side

Normal 3D

∗

1

Top and Bottom

Normal 3D

∗

1

Normal format (2D)

Normal 3D

∗

1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed

without 3D effect.

●

Depending on the player or broadcasts, the image may be different from the above illustrations.

English

20

How to Use VIERA TOOLS

You can access some special features easily by using the VIERA TOOLS function.

1

Display icons of the feature

2

Select a feature

VIERA Link

select

access

3

Follow the operations of each feature

■

To return to TV

or

Page is loading ...

Panasonic TX-P50XT50 Owner's manual

This manual is also suitable for

Panasonic TX-P50XT50 Owner's manual

in other languages

Related papers

Other documents