2. Acer
  3. H7550BD
H7550BD

Acer H7550BD, H7550BDz, H7550ST, Z650 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Acer H7550BD Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How to connect the projector to a computer?
    How to turn on the projector?
    How to turn off the projector?
    What kind of audio speakers are recommended for better audio performance?
INSTALLATION
INTERFACE CONNECTOR
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights
Reserved.
To ensure better audio performance through BT connection, please use Acer BT speaker SPBT1 or BT ISSC solution
speakers. Suggested speakers are as follows: Acer SPBT1, Auluxe AW1010, Mecer SP201, Sony SRS-BTV5/Y,
Sony SRS-BTM8/B, Sony SRS-X3/W, Sony SRS-X1/W.
1
3
1
2
1
2
2
E62405SP
R
Note: Connector interface is subject to model's specifications
Quick Start
INSTALLATION
1. Power cord
2. VGA cable
3. Composite video cable
4. Audio cable
5. S-Video cable
6. RS232 cable
7. USB cable
8. 3 RCA component cable
9. HDMI (MHL) cable
10. WirelessHD dongle
11. Wireless dongle
Note: Connector interface is subject to model's specifications
INTERFACE CONNECTOR
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable to
the "VGA IN" connector on the
projector; connect the other end to
the VGA connector on the computer
and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run your presentation.
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fans shut down.
3. Do not turn off and unplug the
projector for at least one minute after
turning it on.
Start Cepat
INSTALASI
1. Kabel daya
2. Kabel VGA
3. Kabel video gabungan
4. Kabel audio
5. Kabel S-Video
6. Kabel RS232
7. Kabel USB
8. 3 Kabel komponen RCA
9. Kabel HDMI (MHL)
10. Dongle HD nirkabel
11. Dongle nirkabel
Catatan: Antarmuka penghubung untuk spesifikasi model
PENGHUBUNG ANTARMUKA
1. Pastikan proyektor dan komputer
Anda mati.
2. Hubungkan salah satu ujung kabel
VGA ke penghubung "VGA IN"
pada proyektor; hubungkan ujung
kabel yang lain ke penghubung
VGA pada komputer dan
kencangkan sekrup.
3. Hubungkan salah satu ujung kabel
daya ke dalam soket daya AC pada
proyektor; hubungkan ujung kabel
yang lain ke outlet elektrik.
1. Lepaskan tutup lensa.
2. Hidupkan proyektor dahulu,
kemudian komputer.
3. Sesuaikan posisi, fokus dan zum.
4. Jalankan presentasi Anda.
1. Tekan tombol daya (power) dua
kali.
2. Jangan pindahkan kabel daya AC
dari stop kontak hingga kipas
proyektor mati.
3. Jangan matikan dan lepas kabel
proyektor minimal selama satu
menit setelah dihidupkan.
1
2
Connecting to a Computer
Powering On the Projector
Powering Off the Projector
1
2
Menghubungkan ke Komputer
Pemberian Daya pada Proyektor
Memutus Daya pada Proyektor
English Bahasa Indonesia
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/