© 2012 - Franke Coffee Systems Americas - This document is the confidential and proprietary property of Franke Coffee Systems Americas, and shall not be reproduced in any form of media
without the expressed written permission of a Franke Coffee Systems Americas representative. Due to continuous product development, Franke Coffee Systems Americas reserves the right to make
changes in design and specication without prior notice. REV 09Feb2012•G80005600FCG Pura Fresco install guide_new.indd• Under license of Franke Technology and Trademark, Ltd. Switzerland. Printed in U.S.A.
Franke Coffee Systems Americas
800 Aviation Parkway
Smyrna, TN USA 37167
Tel: 1 800 310 5710
Fax: 1 615 793 5940
www.us.franke-cs.com
110V 15 amp
for refrigerator
(plug included)
Receptacle
within 3’. Plug
is included with
machine.
Receptacle required
for espresso
Receptacle required
for refrigerator
5-15R
L6-30R
Unit Height Width Depth Ship weight Voltage/Phase/Cycle Wattage Amp Load Amp Circuit Plug Water line Water hardness Drain
Espresso
28”
690mm
13”
320mm
24”
590mm
66lbs
30kg
208-240/1/60 4400 22 A 30 A
NEMA
L6-30P
G 3/8” 1-5 gpg
16mm ID
vented
Refrigerator
13”
330mm
9”
225mm
18”
453mm
29lbs
14kg
110 /1/60
75
1.5 A 15 A
NEMA
5-15P
n/a n/a n/a
3/8” Braided stainless
steel cold water supply
line
Floor drain
16mm (3/8”)
Vented drain
10” of clearance
recommended
above grinder
(5” minimum)
28”
high
13” wide
All electrical and plumbing
must meet local codes
Please refer to specication
sheets for your machine
1” minimum clearance
on sides and rear of
machine
Water filter
supplied with
espresso machine
Water and drain within 5’
Cabinet
6”
Scale drawing for
counter drill hole
10”-14”
2.5”
diameter hole
for utility lines
9” wide
4” high
PURA FRESCO
C 2M 1P H CE W