Viper 2.08 User manual
- Category
- Measuring, testing & control
- Type
- User manual
Installation & Operation Manual
VIPER 2.08
Manual # 016-0159-894 Rev H 01/07
Table of Contents
Chapter 1 - Getting Started with the Viper System ................................................................1
The Viper Interface ................................................................................................................................... 2
Active Matrix Transflective Touchscreen ..................................................................................... 2
Keypad ......................................................................................................................................... 3
Adjusting the Backlight ..................................................................................................... 3
Connectors................................................................................................................................... 4
Flashdisk Storage Card ............................................................................................................... 4
Installing the Flashdisk ..................................................................................................... 5
Hardware Installation................................................................................................................................ 6
Viper Single Product (Liquid) CAN Control System ..................................................................... 7
Viper Dual Product (Liquid/Granular) CAN Control System ......................................................... 8
Viper Power Connection............................................................................................................... 9
Viper Console Connection.......................................................................................................... 10
DGPS Receiver Connection ...................................................................................................... 11
Viper Guidance System ............................................................................................................. 12
Viper/Invicta 115/RGL 600 Universal/Smartrax Package ........................................................... 13
Programs Menu ..................................................................................................................................... 13
Selecting a Program .................................................................................................................. 14
Screen Calibration ................................................................................................................................. 14
Registering Your Viper System .............................................................................................................. 16
Viper Care and Use................................................................................................................................ 21
Chapter 2 - Setting Up the Controller Area Network (CAN).................................................23
CAN System Connections ..................................................................................................................... 23
CAN Terminators ....................................................................................................................... 24
Wiring Power to a CAN System ................................................................................................. 24
CAN Node Wiring ....................................................................................................................... 25
Adding Nodes to the CAN System.............................................................................................. 26
Detecting the CAN Bus Nodes............................................................................................................... 27
CAN Initialization Results ........................................................................................................... 27
Selecting a New Controller......................................................................................................... 27
Re-Addressing Product Nodes .................................................................................................. 28
Programming the Nodes on the CAN System ....................................................................................... 29
Boom Cals ................................................................................................................................. 30
Miscellaneous ............................................................................................................................ 31
Units ............................................................................................................................... 32
Speed Sensor................................................................................................................. 32
Speed Cal.......................................................................................................................32
AccuBoom Node ............................................................................................................ 35
Audible Alarms ............................................................................................................... 35
Fan/Pump RPM.............................................................................................................. 36
Speed ............................................................................................................................. 36
Node Version Information ............................................................................................... 37
Data Box 1.................................................................................................................................. 38
Dual Flow % ................................................................................................................... 39
Off Rate %......................................................................................................................39
Low Tank........................................................................................................................39
a
Viper Installation and Operators Manual 2.08
Low Limit ........................................................................................................................ 39
Flow/Shaft Alarm............................................................................................................ 40
Vacuum/Bin Alarm ......................................................................................................... 40
Decimal Shift.................................................................................................................. 40
Zero ShutOff ................................................................................................................... 41
Display Smoothing ......................................................................................................... 41
Agitator ........................................................................................................................... 41
Ratio Rate ......................................................................................................................41
Data Box 2.................................................................................................................................. 42
Tank Volume .................................................................................................................. 43
Area/Hour ....................................................................................................................... 43
Vol/Min ............................................................................................................................ 43
Rate Cal ......................................................................................................................... 43
Rate +/- .......................................................................................................................... 43
Meter Cal/Density ........................................................................................................... 43
Spreader......................................................................................................................... 43
Valve Cal ........................................................................................................................ 48
Valve Cal 2 .....................................................................................................................48
Fan/Pump Cal ................................................................................................................ 48
Min PW........................................................................................................................... 49
Pre Set PW .................................................................................................................... 53
PW Freg.........................................................................................................................53
Ratio Rate ......................................................................................................................53
Valve Delay .....................................................................................................................53
PWM............................................................................................................................... 53
Pressure Area ............................................................................................................................ 54
Dual Pressure ................................................................................................................ 54
Calibrating the Pressure Transducer Using an Analog Gauge ...................................... 55
Entering a Setting with no Analog Gauge ....................................................................... 55
Application Area.......................................................................................................................... 56
Tally Registers ........................................................................................................................... 58
Resetting the Tally Registers ......................................................................................... 59
Setting or Resetting Distance and Individual Nodes ...................................................... 59
Alarms ....................................................................................................................................... 61
Chapter 3 - Navigating the Viper Interface............................................................................63
Main Screen Features............................................................................................................................ 63
Profile ....................................................................................................................................... 64
Current Heading ......................................................................................................................... 66
Speed ....................................................................................................................................... 67
Map Area .................................................................................................................................... 68
Application Rates ....................................................................................................................... 69
Booms ....................................................................................................................................... 70
Tabs ....................................................................................................................................... 71
GPS Status Indicator.................................................................................................................. 72
Product Control Status............................................................................................................... 74
Autoboom Status Indicator ......................................................................................................... 75
Display Data ............................................................................................................................... 77
Tabs ....................................................................................................................................... 78
Main Tab..................................................................................................................................... 79
Field Boundaries ........................................................................................................................ 80
b
Manual # 016-0159-894 Rev H 01/07
Guide Tab ................................................................................................................................... 81
Rx+Cov+Scout Tab ................................................................................................................... 82
Rx Tab ....................................................................................................................................... 83
Cov Tab...................................................................................................................................... 85
Accessing Coverage Map Information............................................................................ 86
Scout Tab ................................................................................................................................... 87
Marking a Field Boundary ............................................................................................... 87
Importing a Field Boundary............................................................................................. 89
AccuBoom Tab........................................................................................................................... 92
Screen Tool Icons.................................................................................................................................. 93
System Status Icons.............................................................................................................................. 94
Menus ....................................................................................................................................... 95
Exit Button .................................................................................................................................. 95
About Button ............................................................................................................................... 96
Setup Button............................................................................................................................... 97
Activation Key and Feature Activation .................................................................................................... 98
Entering the Activation Key......................................................................................................... 98
Viper Features...........................................................................................................................100
Guidance .......................................................................................................................100
Single Product VRA.......................................................................................................100
Multi-Product VRA .........................................................................................................100
Maps ......................................................................................................................................101
Street Maps ......................................................................................................................................102
Downloading Street Maps .........................................................................................................102
Loading the Street Maps to the Viper Console ..........................................................................103
Deleting Street Maps .................................................................................................................104
Scout Maps ......................................................................................................................................104
External Waypoint Switchbox....................................................................................................106
About Offsets ............................................................................................................................107
Coverage Maps.....................................................................................................................................108
Setting the Coverage Map Percentages and Colors .................................................................108
Zero Rate Tolerance .................................................................................................................109
Prescription (Rx) Maps .........................................................................................................................110
Accessing the Rx Map Menu.....................................................................................................111
Rx Look-Ahead ..........................................................................................................................112
Rx Map Colors...........................................................................................................................113
Editing a Rx Color Template .....................................................................................................117
Deleting a Rx Color Template ...................................................................................................118
Local Settings ......................................................................................................................................119
Accessing the Local Setting Menu ............................................................................................119
Language...................................................................................................................................120
Choosing a Language ...................................................................................................120
Profile Configuration ..................................................................................................................121
Saving Profile Information..............................................................................................121
Loading a Saved Profile.................................................................................................122
Units Configuration ....................................................................................................................123
Setting the Unit of Measurement ...................................................................................123
Time Zone Configuration ...........................................................................................................124
Setting the Correct Operating Time Zone .....................................................................124
Serial Communication Port Setup.............................................................................................125
GPS Comm Port Setup ........................................................................................................................126
c
Viper Installation and Operators Manual 2.08
Generic (Non-Raven) GPS Setup .............................................................................................127
Setting up the GPS Comm Port to a Non-Raven DGPS Receiver ...............................127
Raven GPS Setup.....................................................................................................................128
Auto-Configuring a Raven DGPS Receiver...................................................................128
Raven GPS + Lightbar Setup....................................................................................................129
Configuring a Raven DGPS Receiver + Lightbar ..........................................................129
Tilt Sensor ......................................................................................................................................130
Configuring the Tilt Sensor........................................................................................................132
Tilt Status ..................................................................................................................................133
Tilt..................................................................................................................................134
Temp .............................................................................................................................134
Dir..................................................................................................................................134
Antenna Height ..............................................................................................................134
GPS Delay.....................................................................................................................134
Reverse Polarity............................................................................................................134
Tilt Filter .........................................................................................................................134
Zeroing the Tilt Sensor ..............................................................................................................135
Console Comm Port Setup...................................................................................................................136
Auxiliary Comm Port Setup...................................................................................................................136
Configuring Viper for Lightbar Guidance ...................................................................................137
Configuring the On-Screen Lightbar..........................................................................................137
External Lightbar .......................................................................................................................139
Boom Settings and Mapping .................................................................................................................140
Boom Setup ..............................................................................................................................140
Setting up Booms..........................................................................................................141
Boom Mapping...............................................................................................................145
Mapping the Booms ..................................................................................................................146
Advanced Settings ....................................................................................................................148
Chapter 4 - Using the Viper System ....................................................................................151
Jobs ......................................................................................................................................151
New Jobs...................................................................................................................................151
Product Application .......................................................................................................152
Guidance .......................................................................................................................153
AccuBoom Control ........................................................................................................154
Product Chaining...........................................................................................................154
Starting a New Job ...................................................................................................................155
Pausing a Job................................................................................................................162
Restarting a Paused Job...............................................................................................162
Existing Jobs .............................................................................................................................162
Viewing an Existing Job.................................................................................................163
Adding to an Existing Job ..............................................................................................163
Deleting Jobs ............................................................................................................................164
Deleting Jobs by Selection ............................................................................................165
Application Reports ...............................................................................................................................166
Customer Information ...............................................................................................................167
Field Information........................................................................................................................168
Field Conditions.........................................................................................................................169
Weather Information..................................................................................................................170
Applicator Information ................................................................................................................170
Vehicle Information....................................................................................................................171
d
Manual # 016-0159-894 Rev H 01/07
Product Information...................................................................................................................172
Ingredient Information ................................................................................................................173
Report Notes Information ..........................................................................................................174
Creating an Application Report..................................................................................................175
Chapter 5 - Product Chaining..............................................................................................177
Enabling Product Chaining....................................................................................................................177
Using Product Chaining ........................................................................................................................181
Display Data ......................................................................................................................................183
Miscellaneous Messages......................................................................................................................184
Chapter 6 - Using AccuBoom..............................................................................................185
Viper CAM AccuBoom Installation .........................................................................................................186
Viper CAN AccuBoom with Serial Console Installation .........................................................................187
AccuBoom Control Setup .....................................................................................................................188
Look-Ahead ...............................................................................................................................188
Turn-Off % Coverage ................................................................................................................188
AccuBoom Override .............................................................................................................................189
Zero Rate Shut Off ................................................................................................................................189
Configuring the AccuBoom Control.......................................................................................................189
AccuBoom Boom Disable.....................................................................................................................190
Disabling Booms.......................................................................................................................190
Zero Rate Shutoff ..................................................................................................................................191
Enabling Zero Rate Zone Shut Off.............................................................................................191
AccuBoom Override .............................................................................................................................191
Enabling AccuBoom Override ...................................................................................................191
AccuBoom Spray/No-Spray Zones ...........................................................................................193
Standard AccuBoom Method ........................................................................................194
Create AccuBoom No-Spray Map Method ....................................................................194
Load AccuBoom No-Spray Map Method .......................................................................195
Create Map From Field Boundary Method ....................................................................196
Changing Spray/No-Spray Default Colors ....................................................................197
AccuBoom Spray/No-Spray Maps.................................................................................198
Chapter 7 - Using AutoBoom ..............................................................................................203
UltraGlide Autoboom .............................................................................................................................204
PowerGlide Plus Autoboom ..................................................................................................................205
Calibrating Autoboom ............................................................................................................................206
Calibrating UltraGlide Autoboom ...........................................................................................................207
Calibrating UltraGlide in PowerGlide Plus Mode ...................................................................................211
Calibrating PowerGlide Plus Autoboom ................................................................................................215
Autoboom Operation .............................................................................................................................217
Enabling Autoboom ...............................................................................................................................219
Autoboom Status Display......................................................................................................................220
Adjusting Autoboom Operation .............................................................................................................220
UltraGlide System Adjustment ..............................................................................................................221
To Adjust Sensor Height............................................................................................................221
To Adjust Sensitivity ..................................................................................................................221
To Adjust Speed........................................................................................................................222
PowerGlide Plus System Adjustment ...................................................................................................222
To Adjust High and Low Limits of the Pressure Alarm Setting .................................................222
e
Viper Installation and Operators Manual 2.08
To Adjust the Pressure Alarm Point ..........................................................................................223
To Adjust Heaviest Setting ........................................................................................................223
To Adjust Lightest Setting..........................................................................................................223
Resetting Defaults ................................................................................................................................224
Resetting UltraGlide Defaults ....................................................................................................224
Resetting PowerGlide Plus Defaults .........................................................................................226
Chapter 8 - Viper Guidance..................................................................................................229
Swathing Patterns.................................................................................................................................232
Patterns.....................................................................................................................................232
Straight AB ................................................................................................................................233
Contour Fixed............................................................................................................................233
Contour 1 Button .......................................................................................................................235
Contour 2 Button .......................................................................................................................236
C Clamp ....................................................................................................................................237
Headlands Separate..................................................................................................................238
Hedlands Combined..................................................................................................................239
Headlands 2 Separate...............................................................................................................240
Headlands 2 Combined.............................................................................................................241
Spiral ......................................................................................................................................242
One Step ...................................................................................................................................243
Seed ......................................................................................................................................244
Headlands with Contour ............................................................................................................245
Headlands 2 with Contour .........................................................................................................246
Using the Guide Tab .............................................................................................................................248
Lightbar Display.........................................................................................................................249
Off-Swath Distance...................................................................................................................249
Swath Number...........................................................................................................................249
Swathing Pattern.......................................................................................................................249
LB Bright Button ........................................................................................................................249
LB Dim Button...........................................................................................................................249
Reset A-B Button ......................................................................................................................249
Recal A-B Button.......................................................................................................................250
Set A/Set B Button ....................................................................................................................250
Load A-B/Save A-B Button ........................................................................................................250
Set Flag\Goto Flag\Clear Flag Button .......................................................................................251
Zoom Level ................................................................................................................................251
Course Direction Indicator (CDI) Needle...................................................................................251
Nav Needle Stationary ...............................................................................................................251
Nav Needle Moving....................................................................................................................252
Guidance AB Lines ...............................................................................................................................252
Saving an AB Line .....................................................................................................................252
Loading an AB Line ...................................................................................................................254
Chapter 9 - Understanding Flashdisk Files........................................................................255
Flashdisk File Structure ........................................................................................................................255
AccuBoom Folder .....................................................................................................................255
Autoboom Alarms......................................................................................................................256
CovMaps Folder ........................................................................................................................256
Guidance Archive Folder ...........................................................................................................256
Jobs Folder................................................................................................................................256
f
Manual # 016-0159-894 Rev H 01/07
Rbin Folder ................................................................................................................................256
RxMaps Folder ..........................................................................................................................257
RxMaps\colors Sub-Folder........................................................................................................257
Scout Folder ..............................................................................................................................257
Setting Folder ............................................................................................................................257
Streetmaps Folder ....................................................................................................................257
Vnav Folder ...............................................................................................................................258
Zulu.ini File ................................................................................................................................258
Maintaining the Flashdisk ......................................................................................................................258
Chapter 10 - External Serial Rate Control...........................................................................259
Setting up the Auxiliary Port for External Serial Rate Control ...............................................................259
Connecting the GreenSeeker® RT200 to Viper....................................................................................260
Starting a Job with External Rate Control .............................................................................................260
Chapter 11 - Rbin Viewer .....................................................................................................263
Downloading RBin Viewer.....................................................................................................................263
Dowloading RBin Software .......................................................................................................263
Installing the RBin Viewer......................................................................................................................265
To Install the RBin Viewer .........................................................................................................266
Viewing Rbin Files.................................................................................................................................270
To Open an Rbin Report ...........................................................................................................270
Exporting Shapefiles .................................................................................................................272
Toolbar Options ....................................................................................................................................273
To Select the Coverage Display Options ..................................................................................274
To Change Coverage Map Colors.............................................................................................275
Rbin Options ......................................................................................................................................276
To Change the Units of Measure...............................................................................................276
To Change the Layout ...............................................................................................................277
To Change the Language..........................................................................................................279
Enabling Manual Console Display .............................................................................................280
Export Settings..........................................................................................................................281
Editing an Rbin Report ..............................................................................................................282
Reset History ............................................................................................................................285
Chapter 12 - Troubleshooting the Viper System ...............................................................287
Viper Troubleshooting Information.........................................................................................................287
General Issues ..........................................................................................................................288
Setup Issues .............................................................................................................................290
Job Issues .................................................................................................................................291
Rx Map Issues...........................................................................................................................292
Coverage Map Issues ...............................................................................................................292
Error Messages ....................................................................................................................................293
General Error Messages ...........................................................................................................293
Setup Error Messages ..............................................................................................................293
Job Error Messages ..................................................................................................................294
Variable Rate Control (VRC) Error Messages ..........................................................................296
GPS Error Messages ................................................................................................................297
CAN Troubleshooting ............................................................................................................................298
g
Viper Installation and Operators Manual 2.08
Appendices
Appendix A - Flashdisk Maintenance.....................................................................................................299
Appendix B - Calculating the Boom Width (Calibration) for Liquid Applications....................................303
Appendix C - Calculating and Verification of Spreader Constant..........................................................305
Appendix D - Calculating Speed Calibration .........................................................................................307
Appendix E - Calculating Calibrations for Liquid and Granular Applications .........................................309
Appendix F - Testing the Speed Sensor Extension Cable ....................................................................313
Appendix G - Testing the Flow Meter Cables........................................................................................317
Appendix H - Using the Invicta Front Panel Program with the Viper System ........................................321
Appendix I - Controlling Spinner RPM ..................................................................................................323
h
Manual # 016-0159-894 Rev H 01/07
Index
Autoboom Operation 21
7
Autoboom Status Display 22
0
Autoboom Status Indicator 7
5
Auto-Configuring a Raven DGPS Receiver
12
8
Auxiliary Comm Port Setup 13
6
Boom Cals 3
0
Boom Mapping 14
5
Boom Settings and Mapping 14
0
Boom Setup 14
0
Booms 7
0
C Clamp 23
7
Calibrating Autoboom 20
6
Calibrating PowerGlide Plus Autoboom 21
5
Calibrating the Pressure Transducer Using
5
5
Calibrating UltraGlide Autoboom 20
7
Calibrating UltraGlide in PowerGlide Plus M
21
1
CAN Initialization Results 2
7
CAN Node Wiring 2
5
CAN System Connections 2
3
CAN Terminators 2
4
CAN Troubleshooting 29
8
Change Coverage Map Colors 27
5
Change the Language 27
9
Change the Layout 27
7
Change the Units of Measure 27
6
Changing Spray/No-Spray Default Colors
19
7
Choosing a Language 12
0
Configuring a Raven DGPS Receiver + Lig
12
9
Configuring the AccuBoom Control 18
9
Configuring the On-Screen Lightbar 13
7
Configuring the Tilt Sensor 13
2
Configuring Viper for Lightbar Guidance 13
7
Connecting the GreenSeeker® RT200 to V
26
0
Connectors
4
Console Comm Port Setup 13
6
Contour 1 Button 23
5
Contour 2 Button 23
6
Contour Fixed 23
3
B
C
A
About Button 9
6
About Offsets 10
7
AccuBoom Tab 9
2
Accessing Coverage Map Information 8
6
Accessing the Local Setting Menu 11
9
Accessing the Rx Map Menu 11
1
AccuBoom Boom Disable 19
0
AccuBoom Control 15
4
AccuBoom Control Setup 18
8
AccuBoom Folder 25
5
AccuBoom Node 3
5
AccuBoom Override 18
9
AccuBoom Override 19
1
AccuBoom Spray/No-Spray Maps 19
8
AccuBoom Spray/No-Spray Zones 19
3
Activation Key and Feature Activation 9
8
Active Matrix Transflective Touchscreen
2
Adding Nodes to the CAN System 2
6
Adding to an Existing Job 16
3
Adjust the Pressure Alarm Point 22
3
Adjusting Autoboom Operation 22
0
Adjusting the Backlight
3
Advanced Settings 14
8
Agitator 4
1
Alarms 6
1
Antenna Height 13
4
Appendix A - Flashdisk Maintenance 29
9
Appendix B - Calculating the Boom Width
30
3
Appendix C - Calculating and Verification
30
5
Appendix D - Calculating Speed Calibration
30
7
Appendix E - Calculating Calibrations for L
30
9
Appendix F - Testing the Speed Sensor Ex
31
3
Appendix G - Testing the Flow Meter Cabl
31
7
Appendix H - Using the Invicta Front Pane
32
1
Appendix I - Controlling Spinner RPM 32
3
Application Area 5
6
Application Rates 6
9
Application Reports 16
6
Applicator Information 17
0
Area/Hour 4
3
Audible Alarms 3
5
Autoboom Alarms 25
6
Viper Installation and Operators Manual 2.08
Course Direction Indicator (CDI) Needle 25
1
Cov Tab 8
5
Coverage Map Issues 29
2
Coverage Maps 10
8
CovMaps Folder 25
6
Create AccuBoom No-Spray Map Method
19
4
Create Map From Field Boundary Method
19
6
Creating an Application Report 17
5
Current Heading 6
6
Customer Information 16
7
Data Box 1 3
8
Data Box 2 4
2
Decimal Shift 4
0
Deleting a Rx Color Template 11
8
Deleting Jobs 16
4
Deleting Jobs by Selection 16
5
Deleting Street Maps 10
4
Detecting the CAN Bus Nodes 2
7
DGPS Receiver Connection 1
1
Dir 13
4
Disabling Booms 19
0
Display Data 7
7
Display Data 18
3
Display Smoothing 4
1
Dowloading RBin Software 26
3
Downloading RBin Viewer 26
3
Downloading Street Maps 10
2
Dual Flow % 3
9
Dual Pressure 5
4
Editing a Rx Color Template 11
7
Editing an Rbin Report 28
2
Enabling AccuBoom Override 19
1
Enabling Autoboom 21
9
Enabling Manual Console Display 28
0
Enabling Product Chaining 17
7
Enabling Zero Rate Zone Shut Off 19
1
Entering a Setting with no Analog Gauge 5
5
Entering the Activation Key 9
8
D
E
Error Messages 29
3
Existing Jobs 16
2
Exit Button 9
5
Export Settings 28
1
Exporting Shapefiles 27
2
External Lightbar 13
9
External Serial Rate Control 25
9
External Waypoint Switchbox 10
6
Fan/Pump Cal 4
8
Fan/Pump RPM 3
6
Field Boundaries 8
0
Field Conditions 16
9
Field Information 16
8
Flashdisk File Structure 25
5
Flashdisk Storage Card
4
Flow/Shaft Alarm 4
0
General Error Messages 29
3
General Issues 28
8
Generic (Non-Raven) GPS Setup 12
7
Getting Started with the Viper System
1
GPS Comm Port Setup 12
6
GPS Delay 13
4
GPS Error Messages 29
7
GPS Status Indicator 7
2
Guidance 10
0
Guidance 15
3
Guidance AB Lines 25
2
Guidance Archive Folder 25
6
Guide Tab 8
1
Hardware Installation
6
Headlands 2 Combined 24
1
Headlands 2 Separate 24
0
Headlands 2 with Contour 24
6
Headlands Separate 23
8
Headlands with Contour 24
5
F
G
H
Manual # 016-0159-894 Rev H 01/07
Hedlands Combined 23
9
Importing a Field Boundary 8
9
Ingredient Information 17
3
Install the RBin Viewer 26
6
Installing the Flashdisk
5
Installing the RBin Viewer 26
5
Job Error Messages 29
4
Job Issues 29
1
Jobs 15
1
Jobs Folder 25
6
Keypad
3
Language 12
0
LB Bright Button 24
9
LB Dim Button 24
9
Lightbar Display 24
9
Load A-B/Save A-B Button 25
0
Load AccuBoom No-Spray Map Method 19
5
Loading a Saved Profile 12
2
Loading an AB Line 25
4
Loading the Street Maps to the Viper Cons
10
3
Local Settings 11
9
Look-Ahead 18
8
Low Limit 3
9
Low Tank 3
9
Main Screen Features 6
3
Main Tab 7
9
Maintaining the Flashdisk 25
8
Map Area 6
8
Mapping the Booms 14
6
J
K
L
M
I
Maps 10
1
Marking a Field Boundary 8
7
Menus 9
5
Meter Cal/Density 4
3
Min PW 4
9
Miscellaneous 3
1
Miscellaneous Messages 18
4
Multi-Product VRA 10
0
Nav Needle Moving 25
2
Nav Needle Stationary 25
1
Navigating the Viper Interface 6
3
New Jobs 15
1
Node Version Information 3
7
Off Rate % 3
9
Off-Swath Distance 24
9
One Step 24
3
Open an Rbin Report 27
0
Patterns 23
2
Pausing a Job 16
2
PowerGlide Plus Autoboom 20
5
PowerGlide Plus System Adjustment 22
2
Pre Set PW 5
3
Prescription (Rx) Maps 11
0
Pressure Area 5
4
Product Application 15
2
Product Chaining 15
4
Product Chaining 17
7
Product Control Status 7
4
Product Information 17
2
Profile 6
4
Profile Configuration 12
1
Programming the Nodes on the CAN Syste
2
9
Programs Menu 1
3
PW Freg 5
3
PWM 5
3
N
O
P
Viper Installation and Operators Manual 2.08
Rate +/- 4
3
Rate Cal 4
3
Ratio Rate 4
1
Ratio Rate 5
3
Raven GPS + Lightbar Setup 12
9
Raven GPS Setup 12
8
Rbin Folder 25
6
Rbin Options 27
6
Rbin Viewer 26
3
Re-Addressing Product Nodes 2
8
Recal A-B Button 25
0
Registering Your Viper System 1
6
Report Notes Information 17
4
Reset A-B Button 24
9
Reset History 28
5
Resetting Defaults 22
4
Resetting PowerGlide Plus Defaults 22
6
Resetting the Tally Registers 5
9
Resetting UltraGlide Defaults 22
4
Restarting a Paused Job 16
2
Reverse Polarity 13
4
Rx Look-Ahead 11
2
Rx Map Colors 11
3
Rx Map Issues 29
2
Rx Tab 8
3
Rx+Cov+Scout Tab 8
2
RxMaps Folder 25
7
RxMaps\colors Sub-Folder 25
7
Saving an AB Line 25
2
Saving Profile Information 12
1
Scout Folder 25
7
Scout Maps 10
4
Scout Tab 8
7
Screen Calibration 1
4
Screen Tool Icons 9
3
Seed 24
4
Select the Coverage Display Options 27
4
Selecting a New Controller 2
7
Selecting a Program 1
4
S
R
Serial Communication Port Setup 12
5
Set A/Set B Button 25
0
Set Flag\Goto Flag\Clear Flag Button 25
1
Setting Folder 25
7
Setting or Resetting Distance and Individua
5
9
Setting the Correct Operating Time Zone 12
4
Setting the Coverage Map Percentages and
10
8
Setting the Unit of Measurement 12
3
Setting up Booms 14
1
Setting up the Auxiliary Port for External S
25
9
Setting Up the Controller Area Network (C
2
3
Setting up the GPS Comm Port to a Non-R
12
7
Setup Button 9
7
Setup Error Messages 29
3
Setup Issues 29
0
Single Product VRA 10
0
Speed 3
6
Speed 6
7
Speed Cal 3
2
Speed Sensor 3
2
Spiral 24
2
Spreader 4
3
Standard AccuBoom Method 19
4
Starting a Job with External Rate Control 26
0
Starting a New Job 15
5
Straight AB 23
3
Street Maps 10
2
Streetmaps Folder 25
7
Swath Number 24
9
Swathing Pattern 24
9
Swathing Patterns 23
2
System Status Icons 9
4
Tabs 7
1
Tabs 7
8
Tally Registers 5
8
Tank Volume 4
3
Temp 13
4
The Viper Interface
2
Tilt 13
4
Tilt Filter 13
4
Tilt Sensor 13
0
T
Manual # 016-0159-894 Rev H 01/07
Tilt Status 13
3
Time Zone Configuration 12
4
To Adjust Heaviest Setting 22
3
To Adjust High and Low Limits of the Pres
22
2
To Adjust Lightest Setting 22
3
To Adjust Sensitivity 22
1
To Adjust Sensor Height 22
1
To Adjust Speed 22
2
Toolbar Options 27
3
Troubleshooting the Viper System 28
7
Turn-Off % Coverage 18
8
UltraGlide Autoboom 20
4
UltraGlide System Adjustment 22
1
Understanding Flashdisk Files 25
5
Units 3
2
Units Configuration 12
3
Using AccuBoom 18
5
Using AutoBoom 20
3
Using Product Chaining 18
1
Using the Guide Tab 24
8
Using the Viper System 15
1
Vacuum/Bin Alarm 4
0
Valve Cal 4
8
Valve Cal 2 4
8
Valve Delay 5
3
Variable Rate Control (VRC) Error Messa
29
6
Vehicle Information 17
1
Viewing an Existing Job 16
3
Viewing Rbin Files 27
0
Viper CAM AccuBoom Installation 18
6
Viper CAN AccuBoom with Serial Consol
18
7
Viper Care and Use 2
1
Viper Console Connection 1
0
Viper Dual Product (Liquid/Granular) CAN
8
Viper Features 10
0
Viper Guidance 22
9
Viper Guidance System 1
2
Viper Power Connection
9
U
V
Viper Single Product (Liquid) CAN Contro
7
Viper Troubleshooting Information 28
7
Viper/Invicta 115/RGL 600 Universal/Sma
1
3
Vnav Folder 25
8
Vol/Min 4
3
Weather Information 17
0
Wiring Power to a CAN System 2
4
Zero Rate Shut Off 18
9
Zero Rate Shutoff 19
1
Zero Rate Tolerance 10
9
Zero ShutOff 4
1
Zeroing the Tilt Sensor 13
5
Zoom Level 25
1
Zulu.ini File 25
8
W
Z
Viper Installation and Operators Manual 2.08
RAVEN INDUSTRIES
LIMITED WARRANTY
WHAT IS COVERED?
This warranty covers all defects in workmanship or materials in your Raven
Flow Control Product under normal use, maintenance, and service.
HOW LONG IS THE COVERAGE PERIOD?
This warranty coverage runs for 12 months from the purchase date of your
Raven Flow Control Product. This warranty coverage applies only to the
original owner and is not transferrable.
HOW CAN YOU GET SERVICE?
Bring the defective part, and proof of date of purchase, to your local dealer.
If your dealer agrees with the warranty claim, he will send the part, and
proof of purchase to his distributor or to Raven for final approval.
WHAT WILL RAVEN INDUSTRIES DO?
When our inspection proves the warranty claim, we will, at our option, repair
or replace the defective part and pay for return freight.
WHAT DOES THIS WARRANTY NOT COVER?
Raven Industries will not assume any expense or liability for repairs made
outside our plant without written consent. We are not responsible for damage
to any associated equipment or product and will not be liable for loss of
profit or other special damages. The obligation of this warranty is in lieu of
all other warranties, expressed or implied, and no person is authorized to
assume for us any liability. Damages caused by normal wear and tear, mis-
use, abuse, neglect, accident, or improper installation and maintenance
are not covered by this warranty.
Raven Industries Toll Free 800-243-5435
Flow Controls Division Fax 605-331-0426
P.O. Box 5107 www.ravenprecision.com
Sioux Falls, SD 57117-5107 fcdinfo@ravenind.com
Viper 2.08 Installation & Operator’s Manual (P/N 016-0159-894 Rev H 01/07)
Notice: This document and the information provided are the property of Raven Industries, Inc. and
may only be used as authorized by Raven Industries, Inc. All rights reserved under the copyright laws.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Viper 2.08 User manual
- Category
- Measuring, testing & control
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Mobilis 3401/VINT/4/RASP Datasheet
-
Raven Viper Pro Quick Reference Manual
-
-
-
-
-
Ultra-tow 40509 Owner's manual
-
-
-
