A.E.B. INDUSTRIALE s.r.l.
Via Brodolini, 8 - 40056 Crespellano (Bo) - ITALIA
Tel. + 39 051 969870 - Fax. + 39 051 969725
Internet: www.dbtechnologies.com
E-mail: [email protected]
SUB 28D
SUB 05D
Made in China
COD. 420120181 REV.1
DESIGNED & DEVELOPED in ITALY
MANUALE D’USO - Sezione 1
USER MANUAL - Section 1
BEDIENUNGSANLEITUNG - Abschnitt 1
CARACTERISTIQUES TECHNIQUES - Section 1
H.E.T. Series
SUB D
ACTIVE DIGITAL SUBWOOFERS
SUB 12D
SUB 808D
Page is loading ...
Page is loading ...
EnglishEnglish
user manualuser manual
6
user manualuser manual
EnglishEnglish
5
DESCRIPTION
SUB28D, SUB12D, SUB05D and SUB808D sub-woofer speakers are realized with Hybrid
Enclosure Technology (H.E.T.), developed by the dB Technologies labs.
The box in fact is made in light multilayer wood, coated in PVC and the sides are in
polypropylene.
The speakers of “SUB D” H.E.T. series use multichannel digital power amplifiers of last
generation DIGIPACK .
These highly efficient amplifiers provide high power with limited weight and dimension.
Thanks to the low power dissipated, the cooling of the amplifier module does not require a
fan.
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
of the acoustic components, the frequency response, the limiter, and the phase alignment.
The correct switch on of the amplifier is guaranteed by an initialization procedure; during
this test stage the LEDs (“LIMITER” and “ON SIGNAL”), located on the amplifier
module,stay on together for approx. 2 sec.
At the end of the switch on procedure, on the amplifier module, the “ON SIGNAL” green
LED flashes slowly, when there is signal absence.
During normal operation the “ON SIGNAL” green LED serves as Vu-meter monitoring the
audio level riproduced.
The "LIMITER" red LED lights up to indicate that the internal limiter circuit has tripped to
prevent amplifier distortion and protects the speakers against overloads.
SUB D (H.E.T.) are active sub-woofers designed for medium to large size rooms; are made
using “BAND PASS” so that high sound pressures can be achieved in compact dimensions.
These speakers are designed to function in stereo and in mono modes. It is possible to set
the frequency response and turning of phase (0° or 180°). The output signals can be linked
or controlled by X-OVER output.
For easy use, installation and transport, all subwoofers are provided with:
- 2 plastic handles on sides,
- standard (D.36mm) pole mount plate on top of box.
CONTROLS AND FUNCTIONS
1) " BALANCED INPUT 1” AND " BALANCED INPUT 2”INPUT CONNECTORS
Balanced inputs at line level. Accept “XLR” sockets.
2) "OUT 1 ” AND "OUT 2 ” OUTPUT CONNECTORS
The “XLR” connectors be used to send the input audio signal to another amplified
speaker.
The signal is choosing between “LINK/XOVER” (8) switch.
3) “LIMITER” INDICATOR LIGHT
This indicator shows red to indicate that the internal limiter circuit has tripped.
This prevents amplifier distortion and protects the speakers against overloads.
4) “ON SIGNAL”INDICATOR LIGHT
This indicator light comes on green to indicate that the amplifier is switched on and it
is working properly. The “ON SIGNAL” green LED flashes slowly, when there is
signal absence. During normal operation the LED serves as Vu-meter monitoring
the audio level riproduced.
5) “SUBWOOFER SENSITIVITY” INPUT SENSITIVITY CONTROL
This control adjusts the sensitivity of the signal amplifier input.
This control does not affect the "OUT 1 ” and "OUT 2 ” outputs levels
6) “PHASE” SELECTOR
This two-position switch permits turning the audio signal reproduced by the
subwoofer by 180°.
Rotation makes it easier to optimise the reproduction of the low frequencies even in
the most difficult installation situations. After completing installation, play a piece of
music and move the switch to achieve the best sound reproduction at low
frequencies.
7) “SHAPE” SELECTOR
This switch selects the frequency response of the subwoofer. It is possible to choose
between two configurations: one makes the sound more deep and full of bass, one
for sound full of "punch".
8) "LINK/XOVER" SELECTOR
This switch allows to select the signal type to send "OUT 1 ” and "OUT 2 ” outputs.
The “LINK” position allows to link the same input signal.
The “XOVER” position allows to send input signal cutted to 90Hz frequency.
9) POWER SWITCH “POWER”
This switch can be used to switch the speaker on and off.
10) FUSE CARRIER “FUSE”
Mains fuse housing. Replace only with identical value!
11) POWER CABLE SOCKET “MAINS”
Used for connecting the power cable supplied.
AMPLIFIER PANEL (Ref. page 17)
WOOFER
WOOFER
SUB 05D
SUB 12D
WOOFER
SUB 808D
WOOFERS
SUB 28D
HANDLE
HANDLE
HANDLE
HANDLE
HANDLE
HANDLE
HANDLE
HANDLE
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
O 36mm PEDESTAL/
BRACKET HOUSING
O 36mm PEDESTAL/
BRACKET HOUSING
O 36mm PEDESTAL/
BRACKET HOUSING
O 36mm PEDESTAL/
BRACKET HOUSING
PROTECTIONS
Cooling
Thermal control is provided by the internal DSP, by means of one sensor, controls the
temperature of the amplifier, avoiding overheating by limiting the overall volume.
In case of overheating (> 90°C) the volume decreases proportionally to the temperature
increase, making the change unnoticeable.
The correct volume and all the functions are automatically restored when standard
operating temperatures are reached.
user manualuser manual
EnglishEnglish
7
EnglishEnglish
user manualuser manual
8
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E3
(or lower E2, E1) Electromagnetic environments.
SUB 28D - SUB 12D - SUB 05D - SUB 808D
LOUDSPEAKER INSTALLATION
WARNING
Make sure that the loudspeaker is securely installed in a stable position to avoid any
injuries or damages to persons, animals or property.
Before suspending the loudspeaker check all the components for damages, deformations,
missing or damaged parts that may compromise safety during installation.
If you use the loudspeakers outdoors avoid places that are exposed to bad weather.
The loudspeaker is supplied by the manufacturer company for use in support
WARNING
Never use handles to hang the speaker!
TECHNICAL
SPECIFICA
TION
Amp and processor
Power supply:
T
oroidal T
ransformer
T
oroidal
T
ransformer
T
oroidal
Transformer
T
oroidal
T
ransformer
Pre-Amp:
24bit 48KHz DSP
24bit 48KHz DSP
24bit 48KHz DSP
24bit 48KHz DSP
Amplifier:
Class-D 400 W
Class-D 400 W
Class-D 400 W
Class-D 500 W
Cooling:
Convection
Convection
Convection
Convection
Limiter: Peak, RMS, Thermal
Peak, RMS,
Thermal Peak, RMS,
Thermal
Peak, RMS, Thermal
X-over frequency: 1
10 Hz, 24 dB/oct.
90 Hz, 24 dB/oct.
90 Hz, 24 dB/oct.
90 Hz, 24 dB/oct.
Audio Data
Frequency response -3 dB: 45 Hz - 150 Hz
40 Hz - 150 Hz
30 Hz - 150 Hz 29 Hz - 150 Hz
Max SPL: 125 dB
127 dB
129 dB 131 dB
Components: 2
x
8
“ Woofer - 1,5“ voice coil 1x12“ Woofer - 2,5“ voice coil 1x15“ W
oofer - 2,5“ voice coil
1x18“ W
oofer - 2,5“ voice coil
Input:
2 x XLR fem. Balanced
2 x XLR fem. Balanced
2 x XLR fem. Balanced
2 x XLR fem. Balanced
Output: 2 x XLR male Balanced
2 x XLR male Balanced
2 x XLR male Balanced
2 x XLR male Balanced
Input sensitivity: max 0dBu
max 0dBu
max 0dBu
max 0dBu
Mains connector: IEC, VDE
IEC, VDE
IEC, VDE
IEC, VDE
Inrush current: 15,2
A 15,2 A 15,2
A 19,3
A
Hardware
Pole mount:
36 mm on top
36mm on top
36 mm on top 36 mm on top
Handles:
2 2
2
2
Dimensions (W x H x D): 290 x 520 x 505mm
390 x 520 x 505mm
490 x 520 x 615mm
640 x 520 x 615mm
W
eight: 19,5 Kg 24 Kg
29,5 Kg 34,8 Kg
SUB 28D SUB 12D
SUB 05D
SUB 808D
(1x per side)
(1x per side)
(1x per side)
(1x per side)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
17
18
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
FUSE
MAINS
POWER
Made in China
110-120V 50-60Hz ~
(T5A L 250V )~
220-240V 50-60Hz ~
(T2.5A L 250V )~
“CAUTION”
DO NOT REMOVE COVER
TO PREVENT ELECTRICAL SHOCK
“AVIS”
NE PAS OUVRIR
RISQUE DE CHOCH ELECTRIQUE
MODULE POWER
CONSUMPTION
400W MAX
DESIGNED & DEVELOPED IN ITALY
1
2
5
4
3
8
7
6
9
11
10
AMPLIFICATORE - AMPLIFIER
- AMPLIFICATEURSVERSTÄRKER
CONFIGURAZIONI - CONFIGURATION
KONFIGURATIONEN - CONFIGURATIONS
2 X CROMO 8/10
1 X SUB 28D/12D/05D/808D
2 X OPERA 208D/210D
1 X SUB 28D/12D/05D/808D
2 X CROMO 8/10
2 X SUB 28D/12D/05D/808D
2 X OPERA 208D/210D
2 X SUB 28D/12D/05D/808D
2 X CROMO 12
2 X SUB 12D/05D/808D
2 X OPERA 402D/405D
2 X SUB 05D/808D
CONFIGURAZIONI e
CONFIGURATION and
KONFIGURATIONEN und
CONFIGURATIONS et
COLLEGAMENTI
CABLE CONNECTIONS
VERKABELUNG
CABLAGE
MIXER
STEREO
MONO
MIXER
MIXER
ACTIVE SPEAKER
MIXERMIXER
ACTIVE SPEAKER
LINK
XOVER
LINK
XOVER
LINK
XOVER
ACTIVE SUBWOOFER
ACTIVE SUBWOOFER
20
19
CONFIGURAZIONI e
CONFIGURATION and
KONFIGURATIONEN und
CONFIGURATIONS et
COLLEGAMENTI
CABLE CONNECTIONS
VERKABELUNG
CABLAGE
MIXER
SENSITIVITY
MAX0
LINE
0dB
MIC
-40dB
VOLUME
LIMITER
READY
INPUTSINPUTS
PUSH
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
MIXER
ACTIVE SUBWOOFER
LINK
XOVER
ACTIVE SPEAKER
SENSITIVITY
MAX0
LINE
0dB
MIC
-40dB
VOLUME
LIMITER
READY
INPUTSINPUTS
PUSH
SENSITIVITY
MAX0
LINE
0dB
MIC
-40dB
VOLUME
LIMITER
READY
INPUTSINPUTS
PUSH
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
MIXER
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
ACTIVE SPEAKER
SENSITIVITY
MAX0
LINE
0dB
MIC
-40dB
VOLUME
LIMITER
READY
INPUTSINPUTS
PUSH
LINK
-3dB
0dB
+4dB
8
Balanced Input
Sensitivity
Line
Mic
Flat
Processed
Ready
Signal
Limiter
Input Sens
Link
Input-Link
digital power
DIGITAL ACTIVE SPEAKER
OPERA
D
PUSH
CONFIGURAZIONI e
CONFIGURATION and
KONFIGURATIONEN und
CONFIGURATIONS et
COLLEGAMENTI
CABLE CONNECTIONS
VERKABELUNG
CABLAGE
STEREO
MONO
MIXER
MIXER
ACTIVE SPEAKER
MIXERMIXER
ACTIVE SPEAKER
LINK
XOVER
LINK
XOVER
LINK
XOVER
ACTIVE SUBWOOFER
ACTIVE SUBWOOFER
22
21
CONFIGURAZIONI e
CONFIGURATION and
KONFIGURATIONEN und
CONFIGURATIONS et
COLLEGAMENTI
CABLE CONNECTIONS
VERKABELUNG
CABLAGE
MIXER
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
MIXER
ACTIVE SUBWOOFER
LINK
XOVER
ACTIVE SPEAKER
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
MIXER
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
DSP SUB SETUP
LIMITER
ON / SIGNAL
SUBWOOFER
SENSITIVITY
SHAPE
PHASE
MONO
OUT 1
OUT 2
LINK
XOVER
8
0dB
Mono
0dB
Stereo
0°
180°
BALANCED
INPUT 1
BALANCED
INPUT 2
ACTIVE SPEAKER
LINK
-3dB
0dB
+4dB
8
Balanced Input
Sensitivity
Line
Mic
Flat
Processed
Ready
Signal
Limiter
Input Sens
Link
Input-Link
digital power
DIGITAL ACTIVE SPEAKER
OPERA
D
PUSH
-3dB
0dB
+4dB
8
Balanced Input
Sensitivity
Line
Mic
Flat
Processed
Ready
Signal
Limiter
Input Sens
Link
Input-Link
digital power
DIGITAL ACTIVE SPEAKER
OPERA
D
PUSH
-3dB
0dB
+4dB
8
Balanced Input
Sensitivity
Line
Mic
Flat
Processed
Ready
Signal
Limiter
Input Sens
Link
Input-Link
digital power
DIGITAL ACTIVE SPEAKER
OPERA
D
PUSH
MIXER
SCHEMA A BLOCCHI BLOCK DIAGRAM
BLOCKSCHALTBILD / SCHEMAS FONCTIONNELS
/
24
23
SUB 28D
SHAPE
PHASE
BALANCED
CH2 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 OUT
BALANCED
CH2 OUT
L
N
MAINS
FUSE
POWER
SWITCH
TRANSFORMER
LIMITER
ON SIGNAL
SUBWOOFER
SENSITIVITY
Class D
AMPLFIER
DSP
Digital Signal Processing
Class D
INTERNAL
POWER
SUPPLY
400W
DIGIPACK
WOOFER 8”
SUB 05D
SHAPE
PHASE
BALANCED
CH2 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 INPUT
LINK
SUB
SHAPE
XOVER
XOVER
BALANCED
CH1 OUT
BALANCED
CH2 OUT
L
N
MAINS
FUSE
POWER
SWITCH
TRANSFORMER
LIMITER
ON SIGNAL
SUBWOOFER
SENSITIVITY
Class D
AMPLFIER
DSP
Digital Signal Processing
Class D
INTERNAL
POWER
SUPPLY
400W
DIGIPACK
WOOFER 15"
SUB
SHAPE
SCHEMA A BLOCCHI BLOCK DIAGRAM
BLOCKSCHALTBILD / SCHEMAS FONCTIONNELS
/
SUB 12D
SHAPE
PHASE
BALANCED
CH2 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 OUT
BALANCED
CH2 OUT
L
N
MAINS
FUSE
POWER
SWITCH
TRANSFORMER
LIMITER
ON SIGNAL
SUBWOOFER
SENSITIVITY
Class D
AMPLFIER
DSP
Digital Signal Processing
Class D
INTERNAL
POWER
SUPPLY
400W
DIGIPACK
WOOFER 12"
SUB 808D
SHAPE
PHASE
BALANCED
CH2 INPUT
LINK
XOVER
XOVER
BALANCED
CH1 INPUT
LINK
SUB
SHAPE
XOVER
XOVER
BALANCED
CH1 OUT
BALANCED
CH2 OUT
L
N
MAINS
FUSE
POWER
SWITCH
TRANSFORMER
LIMITER
ON SIGNAL
SUBWOOFER
SENSITIVITY
Class D
AMPLFIER
DSP
Digital Signal Processing
Class D
INTERNAL
POWER
SUPPLY
500W
DIGIPACK
WOOFER 18”
SUB
SHAPE
WOOFER 8”
Page is loading ...
/
