User’s Manual
USB 2.0 On- The- Go
Data Bridge Device
USB 2.0 OTG Data Bridge Device User’s Manual 1
CONTENTS
1. Introduction----------------------------------------------------------------------------------2
2. Package Content--------------------------------------------------------------------------2
3. Product Features--------------------------------------------------------------------------2
4. System Requirements------------------------------------------------------------------2
5. Part Number and Function------------------------------------------------------------3
6. Setting up to back up files, photos, MP3 Music ----------------------3
6.1 Insert the battery------------------------------------------------------------------3
6.2 Turns on power-------------------------------------------------------------------3
6.3 Select Copy Mode----------------------------------------------------------------3
6.4 Plug USB Device to “Source” socket-------------------------------------3
6.5 Plug USB Device to “Target” socket---------------------------------------4
6.6 Copy files----------------------------------------------------------------------------4
7. FAQ----------------------------------------------------------------------------------------------5
8. Compatible Device List-----------------------------------------------------------------5
9. Disclaimer-----------------------------------------------------------------------------------8
10. FCC Statement----------------------------------------------------------------------------8
USB 2.0 OTG Data Bridge Device User’s Manual 2
1. Introduction
This USB OTG Data Bridge Device provides a convenient solution for backing-up
data files from USB Pen Drive, USB Card Reader, Digital Cameras, and other USB
Mass Storage Devices without the presence of a computer.
The device is bidirectional, back-up images from Digital Camera to another USB
Mass Storage Device and copy MP3 songs from MP3 player to another USB Mass
Storage Device.
NOTE: This device does not support any non-confirming USB device, please
check the inserting devices. A confirming USB Device is certified only by the
USB-IF.
2. Package Content
Hardware:
1 x USB 2.0 On- The- Go Data Bridge unit
1 x USB A -B cable
Software:
User’s Manual
3. Product Features
Compliance with USB specification revision 2.0 for Full speed (12Mbps) USB
host and device
Compliance with OTG specification
Support USB Mass Storage Device Class compliance
Support USB Mass Storage Devices with FAT12/16/32 file system
One button copy
4 LEDs for system power/low battery, Source Device OK/copy in progress,
Target Device OK/copy in progress and Error
Mode Switch a) “Disk” Mode: Copy full disk files including directories (folders)
b) “Root” Mode: Copy files in files only without any directory
3 Buttons for Power On, Reset, Copy
Auto Power off
4. System Requirements
Supports USB storage devices with USB Mass Storage Device Class
compliance
USB 2.0 OTG Data Bridge Device User’s Manual 3
5. Part Name and Function
6. Setting up to back up files, photos and MP3 music
6.1 Install the battery
Install 3 pieces of AAA Alkaline Battery to battery cabinet on the backside of
the device.
6.2 Turn on the power
Press the “Power” button to turn on the device.
The device will turn itself off when left unused for 30 seconds. Simply press the
“Power” button again to turn it back on.
6.3 Select the Copy Modes
Slide the “Mode Switch” to “Disk” to copy ALL files and directories (files folders)
from the Source Device to Target Device.
Slide the “Mode Switch” to “Root” to copy files only without the directory from
the Source Device to Target Device.
6.4 Plug USB Device to the “Source” socket
6.4.1 When the “Power” light is on.
When device been plugged into “Source” socket, then “Source” light will
continuously flash about 8 seconds, the USB device is recognized by the
Data Bridge unit.
6.4.2 When the “Power” light is off.
First, please press the “Power” button to turn on the device.
When device been plugged into “Source” socket, then “Source” light will
continuously flash about 8 seconds, the USB device is recognized by the
Data Bridge unit.
Target LED
Reset
Error LED
Power On
Power LED
Mode Switch
Copy
Source Socket
Target Socket
Source LED
USB 2.0 OTG Data Bridge Device User’s Manual 4
The light will not flash when a non- or non-confirming USB Mass Storage
Class device is inserted, please check the inserting device again.
6.5 Plug USB Device to “Target” socket
6.5.1 When the “Power” light is on.
When device been plugged into “Source” socket, then “Source” light will
continuously flash about 8 seconds, the USB device is recognized by the
Data Bridge unit.
6.5.2 When the “Power” light is off.
First, please press the “Power” button to turn on the device.
When device been plugged into “Source” socket, then “Source” light will
continuously flash about 8 seconds, the USB device is recognized by the
Data Bridge unit.
The light will not flash when a non- or non-confirming USB Mass Storage
Class device is inserted, please check the inserting device again.
6.6 Copy files
6.6.1 Please check if your Target Device has enough storage capacity for files
from the Source Device before copying.
6.6.2 Please also make sure that both “Source” light and “Target” light are
turned on before copying.
6.6.3 Do not press the “Copy” button when either the “Source” or “Target” light
is flashing or off.
6.6.4 After pressing the “Copy” button, the “Source” light and “Target” light will
flash in a interlace- mode. It mans the coping process is in progress.
6.6.5 The “Source” light and “Target” light will flash concurrently and you may
unplug both USB Devices.
6.6.6 There are 3 ways to continue for the next copying.
(i). Wait 30 seconds until the “Source”, ”Target” and “Power” lights are all
off. Then press the “Power” button to active this data bridge unit and
then make another copy.
(ii). Unplug both “Source” and “Target” USB devices, then plug- in another
two “Source” and “Target” devices to make another copy.
(iii). When “Source” and “Target” light flash concurrently, press the
“Reset” button then “Power” to active this bridge and make another
copy.
You can proceed for additional copying only when the source and target
devices indicators are on.
USB 2.0 OTG Data Bridge Device User’s Manual 5
7 FAQ
Q: What should I do if the light is not turned on when the USB device is plugged
in?
A: Please unplug USB device and press the “Reset” button then plug in USB
Device again; also check the USB devices again to make sure the USB
devices are USB-IF certified USB Mass Storage Class devices.
Q: If I can’t make copy after plug-in “Source” and “Target” device, what should I
do?
A: Press “Reset” button then press “Power” button to initialize a new connection.
Q: What can I do if the “Error” light turns on?
A: (1). Press “Reset” button to initialize a new connection
(2). If this happens when copying files then the “Error” means the power is
insufficient. Please replace the batteries with new ones.
8 Compatible Device List
USB CARD READER/WRITER
Device Vendor Product Name Media Type Result
Acrox Reader/Writer SD/MMC/MS/MS PRO PASS
Alcor Micro Inc. Pocket Reader MS PASS
Apacer Card Reader SM/SD/CF PASS
Imation Corp Imation IMN-USB-FG1 CD/SM/MMC/SD/MS PASS
Key Technology
Corp.
Multicard Reader CF/SM/SD/MMC PASS
Microdia Hot Reader CF PASS
Microdia Pocket Reader CF PASS
PQI PQI Travel Flash Multi
Function 5010
CF/SM/MMC/SD/MS PASS
PQI PQI USB Reader
FPT-M
CF/SM/MMc/SD PASS
Scanlogic
Corporation
Card Reader SM PASS
MP3 PLAYER
Device Vendor Product Name Capacity Result
Accfast USB MP3 PLAYER 128MB PASS
Acer UDISC USB 2.0 with mp3 player and
FM Radio
128MB PASS
Apacer MP3 Player 32MB PASS
Apple iPod HDD MP3 Player 10GB PASS
BENQ USB MP3 Player 256MB PASS
Jungsoft Co., Ltd MUZIO MP3 Player 256MB PASS
Mobile Media
Tech.
MP3 Player with card reader 128MB PASS
MSI MegaStick USB MP3 Player 128MB PASS
Image Tank IMAGETANK G2 CF/MicroDrive PASS
IOMEGA IOMEGA External Hard Disk 20GB PASS
IOMEGA External Subsystem 20GB PASS
TEAC 2.5” Mobile Hard Drive 20GB PASS
USB 2.0 OTG Data Bridge Device User’s Manual 6
USB FLASH DRIVE
DIGITAL CAMERA
Device Vendor Product Name Support Media Result
ACER M Catch SD PASS
CANON CANON Power Shot A310 SD PASS
CANON CANON IXY II SD PASS
CASIO CASIO MEGA PIXELS EX-M2 SD PASS
CASIO CASIO MEGA PIXEL EX-Z40 SD PASS
CASIO CASIO MEGA PIXEL EX-Z55 SD PASS
CASIO CASIO QV-R4 SD PASS
CASIO CASIO QV-3500EX SD PASS
DIGIMASTER Mouse410 SD PASS
FUJI FinePix 401 SM PASS
FUJI FinePix 4700zoom SM PASS
FUJI FinePix 4900 SM PASS
FUJI FinePix-A330 XD PASS
FUJI FinePix-A340 XD PASS
FUJI FinePix-E500 XD PASS
FUJI FinePix-E510 XD PASS
FUJI FinePix-E550 XD PASS
FUJI FinePix-F401 XD PASS
FUJI FinePix-F402 XD PASS
FUJI FinePix-F410 XD PASS
FUJI FinePix-F420 XD PASS
FUJI FinePix-F440 XD PASS
FUJI FinePix-F450 XD PASS
FUJI FinePix-F610 XD PASS
FUJI FinePix-F700 XD PASS
FUJI FinePix-F710 XD PASS
FUJI FinePix-F810 XD PASS
Device Vendor Product Name Capacity Result
ADATA Speed Drive USB 2.0 128MB PASS
ADATA JOGR 128MB PASS
Apacer Handy Drive 128MB PASS
Apacer USB Drive 64MB PASS
Apcaer Apacer Handy Steno USB 2.0 128MB PASS
Apacer Apacer Handy Steno TN202 128MB PASS
ASUS UDISK 128MB PASS
BRAVO UDISK 128MB PASS
Feiya Technology USB Drive 64MB PASS
Genuine Genuine KTC FC1325N 128MB PASS
JMTek USB Drive 64MB PASS
M-System USB Drive 32MB PASS
ORIGO USB Drive 128MB PASS
Ours Technology USB Drive 128MB PASS
PQI Intelligent Stick 256MB PASS
PRETEC IDISK2.0 128/256MB PASS
SONY USB Drive 2.0 128MB PASS
TOSHIBA USB Drive 64MB PASS
Transcend JetFlash 128MB PASS
USB 2.0 OTG Data Bridge Device User’s Manual 7
FUJI FinePix-M603 XD/CFII PASS
FUJI FinePix-S20/S20 PRO SM/Microdrive PASS
FUJI FinePix-S3000 SM/Microdrive PASS
FUJI FinePix-S5000 SM/Microdrive PASS
FUJI FinePix-S602 SM/Microdrive PASS
FUJI FinePix-S7000 SM/Microdrive PASS
KODAK EasyShare SD/MMC PASS
KONICA MINOTA DIMAGE G400 SD PASS
KONICA MINOTA DIMAGE REVIO KB-500Z CF PASS
KONICA MINOTA DIMAGE X1 SD PASS
KONICA MINOTA DIMAGE Z1 SD PASS
KYOCERA FINECAM L30 SD PASS
KYOCERA FINECAM S3L SD PASS
KYOCERA FINECAM S5R SD PASS
KYOCERA FINECAM SL300R SD PASS
MOBIDV MobiDV H10 SD PASS
NIKON CoolPix-2200 SD/MMC PASS
NIKON CoolPix-3200 SD/MMC PASS
NIKON CoolPix-3700 SD/MMC PASS
NIKON CoolPix-4100 SD/MMC PASS
NIKON CoolPix-4200 SD/MMC PASS
NIKON CoolPix-4500 SD/MMC PASS
NIKON CoolPix-5200 SD/MMC PASS
NIKON CoolPix-5700 SD/MMC PASS
NIKON CoolPix-8700 SD/MMC PASS
NIKON CoolPix-885 SD/MMC PASS
OLYMPUS DIGITAL CAMERA C-730 XD PASS
OLYMPUS CAMEDIA 5050 XD/CF PASS
OLYMPUS U-300 XD PASS
PANASONIC DMC-F1 SD PASS
PANASONIC DMC-F7 SD PASS
PANASONIC DMC-LC33 SD PASS
PANASONIC DV-AS10 D-Snap SD PASS
PENTAX OPTIO 300GS CF PASS
PENTAX OPTIO 555 SD PASS
SAMSUNG DIGIMAX 410 CF PASS
SAMSUNG DIGIMAX V4 SD PASS
SANYO AZ1 CF PASS
SANYO AZ3 CF PASS
SANYO J1 SD PASS
SANYO J2 SD PASS
SONY DSC-F717 MS PASS
SONY DSC-F77 MS PASS
SONY DSC-F788 MS PASS
SONY DSC-P5 MS PASS
SONY DSC-P8 MS PASS
SONY DSC-P92 MS PASS
SONY DSC-P93 MS PASS
SONY DSC-P100 MS PASS
SONY DSC-T1 MS PASS
SONY DSC-T11 MS PASS
SONY DSC-T3 MS PASS
USB 2.0 OTG Data Bridge Device User’s Manual 8
SONY DSC-U20 MS PASS
SONY DSC-W1 MS PASS
TOSHIBA ALLEGERTTO PDR-5300 SD PASS
TOSHIBA PDR-M71 SM PASS
9 Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the
accuracy and completeness of this document and shall in no event be liable for any
loss of profit or any other commercial damage, including but not limited to special,
incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording or information recording
and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.
10 FCC Statement
This device generates and uses radio frequency and may cause interference to radio
and television reception if not installed and used properly. This has been tested and
found to comply with the limits of a Class B computing device in accordance with the
specifications in Part 15 of FCC Rules. These specifications are designed to provide
reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception, which can be
determined by plugging the device in and out, the user can try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the computer into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Consult the
dealer or an experienced radio/TV technician for help.
USB 2.0 OTG Data Bridge Device User’s Manual 9
LIMITED WARRANTY：
THE LIABILITY OF MANUFACTURER FOR DAMAGES UNDER THIS CLAUSE, OTHER
THAN FOR PERSONAL INJURY, RELATING TO ANY ALLEGEDLY DEFECTIVE
PRODUCT, SHALL, UNDER ANY LEGAL OR EQUITABLE THEORY, BE LIMITED TO
THE ACTUAL PRICE PAID BY YOU FOR SUCH PRODUCTS AND SHALL IN NO
EVENT INCLUDE INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
KIND. NO WARRANTY NOT SET FORTH ABOVE IS EXPRESSED OR IMPLIED BY
MANUFACTURER. MANUFACTURER EXPRESSLY DISCLAIMS THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The abovementioned clause is applicable to Product supplier and distributor.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
