Page 1
Manual Version: v1.0
Model Code: 3932
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3932
Contents
1 Front Cover
-
2 Safety
Instructions
-
2 Warning
Instructions
-
3 Assembly
Instructions
-
4 Back Cover
End
3M Aluminium
Folding Decorating
Table
Page 2
Manual Version: v1.0
Model Code: 3932
Oypla.com LLP / www.oypla.com
Contents
1 Front Cover
-
2 Safety
Instructions
-
2 Warning
Instructions
-
3 Assembly
Instructions
-
4 Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Make sure all fastenings are tightly in
place and that everything is in order
before using the product.
Do not discard any of the packaging until
you have checked that you have all of
the parts and fittings required.
This product is not a toy, and is to be
used for its designated purpose.
Do not overload the table.
Make sure weight is distributed evenly
across the product.
Do not carry out alterations or
modifications to this product.
Clean only with a damp cloth. Do not use
strong industrial cleaning substances or
abrasive materials and these will damage
the product.
Only use this product on stable, level and
dry ground.
Keep fingers, loose clothing and hair
away whilst folding the table.
Ensure that all legs lock into position.
If Product has any defects or is damaged,
please contact cserv[email protected]
⚠ Do NOT overload this product. The
maximum weight is 30kg
⚠ Pinch points cause injury! Keep loose
fingers, clothing, hair and jewellery away
when folding the product.
Warnings
Page 3
Manual Version: v1.0
Model Code: 3932
Oypla.com LLP / www.oypla.com
Parts List:
- If you are missing any of the below parts, please contact c[email protected]
- Please be aware that you will be referring to this parts list throughout the assembly
process.
Contents
1 Front Cover
-
2 Safety
Instructions
-
2 Warning
Instructions
-
3 Assembly
Instructions
-
4 Back Cover
End
Assembly Instructions
1
2
3
Firstly, unclip the handle from the side of the product. Fold and extend
each side of the table.
Once all the sides have been extended, unfold the legs from the
underside of the table.
Next, connect the horizontal
bar which extends with the
legs into the clip on the end
of one of the middle poles.
Please see the photo for
guidance.
Lastly, just twist the clip to
secure the poles together.
Repeat with the other leg
and ensure all fittings are
securely in place before
using the product.
Insert pole until the screws
on the horizontal pole are
visible as seen in the photo.
Page 4
Manual Version: v1.0
Model Code: 3932
Oypla.com LLP / www.oypla.com
Contents
1 Front Cover
-
2 Safety
Instructions
-
2 Warning
Instructions
-
3 Assembly
Instructions
-
4 Back Cover
End
/
