universal douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit User manual

Brand
universal douglas
Model
WL-TR40W22-A-D-AB-50 TRK Retrofit Kit
Type
User manual

Universal Douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit

The universal douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit is a convenient solution for upgrading existing light fixtures to energy-efficient LED technology. This kit includes all the necessary components for a quick and easy installation, including a reflector housing, fixture controllers, lens, suspension cables, and leveler brackets.

With its versatile design, the retrofit kit is compatible with a wide range of luminaires, making it suitable for various applications. The kit's high-quality LED technology provides excellent illumination while reducing energy consumption, resulting in significant cost savings over time.

Universal Douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit

The universal douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit is a convenient solution for upgrading existing light fixtures to energy-efficient LED technology. This kit includes all the necessary components for a quick and easy installation, including a reflector housing, fixture controllers, lens, suspension cables, and leveler brackets.

With its versatile design, the retrofit kit is compatible with a wide range of luminaires, making it suitable for various applications. The kit's high-quality LED technology provides excellent illumination while reducing energy consumption, resulting in significant cost savings over time.

Universal Lighting Technologies
SAFETYWARNINGS IMPORTANTSAFETYINFORMATION
Disconnectpower before installation.
DANGER-RISQUEDECHOC-COUPERL’ALIMENTATIONAVANTL’INSTALLATION
attempt installation. Product must be installed in accordance with NEC
or your local electrical code. If you are not familiarwith these codes and
ATTENTION-Risque d’incendie ou de choc électrique. L’installation du kit upgrade
LEDexige Ia connaissancedes systèmes électriques pour luminaires. Sinon qualifié,
ne tentez pasd’installation. Ce produit doit être installé conformément àNECouvotre
code électrique local. Si vous n’êtes pas familier avec ces codes et ces exigences,
veuillezcontacter unélectricienqualifié.
Checktheexistingwiring for damage
before Installing upgrade kit.Do not installif existing wires are damaged.
ATTENTION-Risqued’incendie oude choc électrique.Vérifier silecâblageexistant
n’est pas endommagéavant l’installation du kit upgrade LED.Ne pas installersi des
filssont endommagés.
Luminairewiring and electrical partsmay
be damagedwhen drilling for installation of the LEDupgrade kit.Check
for enclosed wiring and components.
To prevent wiring damage or abrasion, do
not expose wires to theedge of sheet metalor any other sharpobjects.
ATTENTION-Pouréviter lesdégâts de câblagepar l’abrasion, ne pas mettre en contact
lesfilsélectriques avecdes bords de tôle ou d’autres objets pointus.
14049400 Rev. 4
Installthis kit onlyinluminairesthat have
the construction features and dimensions shown in the photographs and/
ordrawings.
ATTENTION-Risque d’incendie ou de choc électrique. lnstallez ce kit seulementdans
les luminaires qui ont les caractéristiques de construction et les dimensions dans les
photographies ou lesdessins de Ia page suivante.
Seulementlestrous indiquésdans lesphotographies ou lesdessinspeuvent être faits
oualtérés pour l’installation du kit upgrade LED.Ne laissezaucun trou ouvertdans le
compartimentélectrique.
ATTENTION-Risque d’incendie ou de choc électrique. Câblage électriques peuvent
être endommagés Iors du perçage pour l’installation du kit upgrade LED.Vérifier les
filset composants.
•
•
•
•
•
•
(1) Reflector housingwith installeddriver and module
(1)Fixturecontrollersif applicable
(2) Lens
(3) Suspensioncableswith mounting scr ews
(2) Leveler brackets
(2)Gap Bracketsforoptionaluse
Page 1
www.universaldouglas.com 12/01/21
Universal Lighting Technologies
14049400 Rev. 4
INSTALLATION
:Disconnectpower to thefixture. Removeexisting
components frominsidethe fixture, includingtheballast,
lampholders,and lampholder leads.
:Drill2holes for#8 screw into inside pan of thefixture.
Holesshouldbe on thecenter axis 2” from theouter
edge of thehousingto mount thesuspensioncable.
:Mount thetwo suspensioncableswith the 90°Eyelets
crimpedon asteel cable atinside of thefixture.
:Pull the steel cablesdown by holding the reflector so that
thekit is flushwith the fixture.
: Insert the steel cables through the cable grips that are
installedon thereflector(driver side)and thentighten the
cables,sothe reflectorisin positionto connect power.
Thereflectorpanel is grounded to thefixturehousingby
the steel cable assemblies.
:Connect the power leads.
:Tucktheremainingsteelcablethrough holesprovided so
thecablesarehidden.
:Install the two leveler brackets at each end between the
grid and thefixture to ensurethat thefixture remains level.
Optional: Install gap brackets between the grid and the
fixtureinthelong directionto covertheopenings.
:Bendthe flat lensinto positiontofitthelenschannel.
:Poweron the fixture
To lower thereflectorforany maintenance –pull
down the tiny knob on the wire grips so the steel cable
willreleasethe reflector
Page 2
www.universaldouglas.com 12/01/21
Universal Lighting Technologies
14049400 Rev. 4
•Usethe wiring diagramto connectthe emergencydriver to the driver and modules.Makesureall
connections are in accordance with the NationalElectrical Codeand any localregulations.
•After installation is complete,supplyAC power to the emergencydriver and join the
converter connector.
•Atthis point,power shouldbe connectedto both the AC driver and theemergencydriver, and
the ChargingIndicator Light shouldilluminateindicatingthe battery ischarging.
•Ashort-term dischargetestmaybe conducted afterthe emergencydriver has been charged for
one hour. Chargefor 24 hours before conductingalong-termdischargetest.
IfNO switchis used (circuitbreaker control only), Jumperthe White/Redand Orange/Black Leads
together and connectto HOT.
Failure to connecttheWHITE/REDLead will prevent normal operation of the Luminaire
During normal operation AC power is applied and the converter connector is closed, the charging indicator
light is illuminated, indicating that the battery is being charged. When power fails, the emergency LED
driver automatically switches to emergency power (internal battery), operating the LED load for a
minimum of 90 minutes.WhenAC power isrestored, theemergencydriver returnsto thechargingmode.
Although no routinemaintenance is requiredto keep the emergencydriver functional, it shouldbe
checked periodicallyto ensurethat it isworking.The following schedule isrecommended:
1. Visually inspect the chargingindicatorlight monthly.It should be illuminated.
2. Testthe emergency operation of the fixture at 30-day intervals for aminimumof 30 seconds.The
LED loadshouldoperateat reducedillumination.
3. Conduct a90-minute dischargetestonceayear.The LEDload shouldoperateat reduced
illumination for at least 90 minutes.
INSTALLATION
Retrofit Kitwith 0-10V Dimming connection
Retrofit Kit with Bluetooth Controls
LEDModule
LEDDRIVER
Power
120-277VAC
Connectionfor
0-10V Dimmer
(+)DIMViolet
(+)DIMGray
Neutral-White
Line-Black
LEDModule
LEDDRIVER
Power
120-277VAC
BT-ICS-S
or BT-IFS-A
(if equipped)
(-)AUXYellow
(+)AUXOrange
(+)DimViolet
(+)DimGray
Neutral-White
Line-Black
•Common(Neutral)toWhiteLead
•Hot (Line)to BlackLead
Page 3
•Switched Hot to White/RedLead
•Converter Connector Leads Connected
www.universaldouglas.com 12/01/21
  • Page 1 1
  • Page 2 2
  • Page 3 3

universal douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit User manual

Brand
universal douglas
Model
WL-TR40W22-A-D-AB-50 TRK Retrofit Kit
Type
User manual

Universal Douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit

The universal douglas WL-TR40W22-A-D-AB-50 TRK Retrofit Kit is a convenient solution for upgrading existing light fixtures to energy-efficient LED technology. This kit includes all the necessary components for a quick and easy installation, including a reflector housing, fixture controllers, lens, suspension cables, and leveler brackets.

With its versatile design, the retrofit kit is compatible with a wide range of luminaires, making it suitable for various applications. The kit's high-quality LED technology provides excellent illumination while reducing energy consumption, resulting in significant cost savings over time.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents