Astria Fireplaces LDV43, Berlin Lights, Paris Lights, Venice Lights - Legacy, VRE4500, VRE4543 Instruction Sheet

I've reviewed the installation instructions for the DFT43 SERIES Decorative Face Trim. This document provides a guide on how to attach the face trim to your fireplace using screws and magnets. The trim is designed to fit a variety of models, which are also listed in the instructions. I'm ready to help with any questions you might have about the installation process or compatible models.
How do I attach the face trim?

Which fireplace models are compatible with this face trim?

DFT43 SERIES DECORATIVE FACE TRIM

INSTALLATION INSTRUCTIONS

1. Loosenscrewsattopofreplacefaceopening.

2. Lineupthedecorativefacetrimwithopeningofre-

place.Locateslotsontheupperangeoftheopening.

Slide slots in face trim under screw heads. Tighten

screws.Magnetsontherearofthedoorwilladhereit

tothefaceofthereplace.

Screws

Slotson

Flange

Decorative

FaceTrim

Slot

P/N 126865-01

Rev. A 03/2014

1508 Elm Hill Pike, Suite 108

Nashville, TN 37210

www.IHP.US.com

P126865-01

For use with models;

BerlinLights 43ZEN and 43ZEP, VRE4543EN and VRE4543EP

VeniceLights 43TEN and 43TEP, DRL4543TEN and DRL4543TEP

ParisLights 43ZMN and 43ZMP, VRL4543ZMN and VRL4543ZMP

/

Other documents