Crux SOOCR-26 Owner's manual

SOOCR-26
Brand
Crux
Model
SOOCR-26
Category
Motorcycle Accessories
Type
Owner's manual

Crux SOOCR-26 is an interface module that enables radio replacement in various Chrysler, Dodge, and Jeep vehicles manufactured between 2004 and 2018. It offers key features like reverse trigger support for rearview cameras, compatibility with both amplified and non-amplified audio systems, and integration with factory steering wheel controls (with the purchase of additional parts).

Crux SOOCR-26 is an interface module that enables radio replacement in various Chrysler, Dodge, and Jeep vehicles manufactured between 2004 and 2018. It offers key features like reverse trigger support for rearview cameras, compatibility with both amplified and non-amplified audio systems, and integration with factory steering wheel controls (with the purchase of additional parts).

RADIO REPLACEMENT
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.050223
SOOCR-26
Radio Replacement for
CHRYSLER, DODGE and JEEP Vehicles
1 of 3
PRODUCT FEATURES:
NOTES:
PARTS INCLUDED:
- Provides reverse trigger for rear view camera.
- Does not Steering Wheel Controls.
2. Also supports radio replacement in vehicles with 4.3” and 8.4” color screens.
SOOCR-26 MODULE Audio Filter
INSTALLATION DIAGRAM:
The SOOCR-26 includes 2 harnesses for older and new model vehicles.
See installaon diagrams below for each harness.
1st Generaon Harness
12-Pin Black
Connector
AMPLIFIED
NON AMPLIFIED
*Does not supply Reverse Trigger on Manual Transmissions. Reverse trigger
wire from the aftermarket radio and/or camera power must be connected to
factory reverse light wire instead.
See page 2 for
speaker wire
connections
VSS (Vehicle Speed Sense) Pink
Illumination (+) Orange
Antenna/Amp Turn on Blue/ White
Reverse Trigger* Purple/White
+12V Constant Yellow
+12V ACC Red
Ground Black
First Generation Harness
Audio
Filter
3. If vehicle is equipped with Steering Wheel Controls use part# SWRCR-59
4. If you require a dash kit with SWC interface use part# DKCR-59K
TO FACTORY
HARNESS
AFTERMARKET
RADIO
RADIO REPLACEMENT
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.050223
SOOCR-26
Radio Replacement for
CHRYSLER, DODGE and JEEP Vehicles
2 of 3
VSS (Vehicle Speed Sense) Pink
Illumination (+) Orange
Antenna/Amp Turn on Blue/ White
Reverse Trigger* Puple/White
+12V Constant Yellow
+12V ACC Red
Ground Black
12-Pin Black
Connector
Second Generation Harness
NOTE: Constant & Ground Pins are isolated.
AMPLIFIED
NON AMPLIFIED
*Does not supply Reverse Trigger on Manual Transmissions. Reverse trigger
wire from the aftermarket radio and/or camera power must be connected to
factory reverse light wire instead.
See below for
speaker wire
connections Audio
Filter
NON AMPLIFIED SYSTEMS AMPLIFIED SYSTEMS
Plug the 4-pin Molex connector to the NON-AMPLIFIED Plug the 4-pin Molex connector to the AMPLIFIED
SOOCR-26 Harness SOOCR-26 Harness
White
White/Black
yarG
kcalB/yarG
Green
Green/Black
Purple
Purple/Black
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
White
kcalB/etihW
yarG
kcalB/yarG
Green
Green/Black
Purple
Purple/Black
Green
Green/Black
Purple
Purple/Black
Not Used
Not Used
Not Used
Not Used
Amplied vehicle troubleshooting: Bluetooth may be inaudible when installing select aftermarket radios.
Therefore hook the rear SWRCR-59 speakers to the aftermarket radio front speakers.
TO FACTORY
HARNESS
AFTERMARKET
RADIO
RADIO REPLACEMENT
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.050223
SOOCR-26
Radio Replacement for
CHRYSLER, DODGE and JEEP Vehicles
3 of 3
When replacing the radio with a 4.3” OR 8.4” screen, you will need to tap the CAN signals along with
Power, Ground, and Speakers from the factory White 22-Pin connector. Tap the wires as shown below.
Constant 12V CAN+ Ground
1
7
12
CAN-
18
FACTORY 22-PIN
WHITE CONNECTOR
FACTORY AUDIO CONNECTIONS
PIN
8
9
10
11
19
20
21
22
SIGNAL
= Right Rear -
= Right Rear +
= Right Front -
= Right Front +
= Left Rear -
= Left Rear +
= Left Front -
= Left Front +
CHRYSLER
2011-2014 200
2005-2010 300
2007-2009 Aspen
2006-2010 PT Cruiser
2007-2010 Sebring
2008-2016 Town & Country
DODGE
2007-2014 Avenger
2006-2012 Caliber
2008-2014 Challenger
2006-2010 Charger
2013 Charger
2006-2011 Dakota
2004-2013 Durango
2009-2016 Grand Caravan
2009-2010 Journey
2013 Journey
2005-2008 Magnum
2007-2011 Nitro
2006-2012 RAM
JEEP
2006-2010 Commander
2007-2016 Compass
2005-2013 Grand Cherokee
2008-2012 Liberty
2007-2017 Patriot
2007-2017 Wrangler
2018 Wrangle (JK only)
MITSUBISHI
2006-2009 Raider
VOLKSWAGEN
2009-2013 Routan
VEHICLE APPLICATIONS:
FOR 4.3” AND 8.4” SCREEN REPLACEMENT:
  • Page 1 1
  • Page 2 2
  • Page 3 3

Crux SOOCR-26 Owner's manual

SOOCR-26
Brand
Crux
Model
SOOCR-26
Category
Motorcycle Accessories
Type
Owner's manual

Crux SOOCR-26 is an interface module that enables radio replacement in various Chrysler, Dodge, and Jeep vehicles manufactured between 2004 and 2018. It offers key features like reverse trigger support for rearview cameras, compatibility with both amplified and non-amplified audio systems, and integration with factory steering wheel controls (with the purchase of additional parts).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI