Delfield N8231 Datasheet

Type
Datasheet

This manual is also suitable for

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Top is one-piece, heavy-gauge stainless steel. Top has a drain
trough and 2 (5.1cm) overhang around perimeter. Top is
elevated 1.68(2.5cm) above counter surface. Refrigeration
lines are secured to the underside of the top and insulated
with high-density, closed-cell polyurethane. Exterior housing
is heavy-gauge galvanized steel.
Condensing unit is suspended below the frost top on a
heavy-gauge steel frame. Condensing unit uses HFC-404a
refrigerant. Unit has an ON/OFF toggle switch, an 8’ (2.4m)
cord and NEMA 5-15 plug. Unit has (1) stainless steel louver
provided for field installation; cutout dimensions are 12 x
23.5” (30.5cm x 59.7cm). A second opening at the rear of the
cabinet must be provided at installation to allow for proper
air circulation.
Specifications
Standard Features
Options &
Accessories
NSF certified
Polyurethane foam insulation
On/off switch
Raised stainless steel top with full
perimeter drain trough and 1/2” drain
Environmentally friendly HFC-404A
refrigerant
Stainless steel louver provided
Push-in perimeter gasket
N8231 31 frost top
N8245 45 frost top
N8259 59 frost top
N8273 73 frost top
N8287 87 frost top
Models
N8200
Drop-In Self-Contained Frost Top
N8200: Frost Top
Single or double service flip-up
sneezeguards
Relocate compressor
* 220V/50 cycle electrical system
*Inclusion of this option will alter
electrical specifications of the unit.
N8259
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
N8200
Drop-In Self-Contained Frost Top
Printed in the U.S.A.
DSN8200
11/06
Specifications
Model
Number
Length
(A) dimension
Counter Cutout Dimension Voltz/Hertz/
Phase
H.P. Amps Ship Weight
N8231 31.75” (80.6cm) 30.75x25” (78.1cm x 63.5cm) 115/60/1 1/4 7.5 142 lbs/64 kg
N8245 45.63” (115.9cm) 44.63x25” (113.6cm x 63.5cm) 115/60/1 1/4 7.5 168 lbs/76 kg
N8259 59.5 (151.1cm) 58.50x25” (148.6cm x 63.5cm) 115/60/1 1/4 7.5 193 lbs/88 kg
N8273 73.38” (186.4cm) 72.38x25” (183.8cm x 63.5cm) 115/60/1 1/3 8.0 209 lbs/95 kg
N8287 87.25” (221.6cm) 86.25x25” (219.1cm x 63.5cm) 115/60/1 1/3 8.0 239 lbs/108 kg
NOTE: NOT TO SCALE
22"
55.9cm
12.75"
32.4cm
3"/7.6cm
2.37"
6.1cm
18"
45.7cm
25.87"
65.70cm
A
A – 4"
A – 10.2cm
NOTE: NOT TO SCALE
A – 8"
A – 20.3cm
NOTE: NOT TO SCALE
21"
53.3cm
RIGHT END VIEW
N8200 MODELS
PLAN VIEW
N8200 MODELS
ELEVATION VIEW
N8200 MODELS
1" (2.54CM)
NOTE: NOT TO SCALE
22"
55.9cm
12.75"
32.4cm
3"/7.6cm
2.37"
6.1cm
18"
45.7cm
25.87"
65.70cm
A
A – 4"
A – 10.2cm
NOTE: NOT TO SCALE
A – 8"
A – 20.3cm
NOTE: NOT TO SCALE
21"
53.3cm
RIGHT END VIEW
N8200 MODELS
PLAN VIEW
N8200 MODELS
ELEVATION VIEW
N8200 MODELS
1" (2.54CM)
NOTE: NOT TO SCALE
22"
55.9cm
12.75"
32.4cm
3"/7.6cm
2.37"
6.1cm
18"
45.7cm
25.87"
65.70cm
A
A – 4"
A – 10.2cm
NOTE: NOT TO SCALE
A – 8"
A – 20.3cm
NOTE: NOT TO SCALE
21"
53.3cm
RIGHT END VIEW
N8200 MODELS
PLAN VIEW
N8200 MODELS
ELEVATION VIEW
N8200 MODELS
1" (2.54CM)
  • Page 1 1
  • Page 2 2

Delfield N8231 Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI